B6.2D Team Kit

Replacements parts specific to the Team Associated RC10 B6.2D Team Kit. This category includes all parts that are updated from the B6.1 car. Additional spare parts can be found under B6.1D replacement parts.

(D) Team Associated 12mm Big Bore Shock Piston Set — Team Associated

(D) Team Associated 12mm Big Bore Shock Piston Set

$6.80

This is a replacement Team Associated 12mm Big Bore Shock Piston Set, and is intended for use with Team Associated 1/10 scale vehicles equipped with the optional Team Associated 12mm Big Bore Shock Kits. This set includes four pistons of each of the...

Add to Cart

(D) Team Associated 12mm Front Shock Spring (Yellow/3.75lbs) — Team Associated

(D) Team Associated 12mm Front Shock Spring (Yellow/3.75lbs)

$10.80

This is an optional Team Associated 12mm Front Spring Set, and is intended for use with the Team Associated B4.1, B44.1, T4.1, SC10 and SC10GT 1/10 scale vehicles equipped with the optional Team Associated Big Bore Shock Set. Effects of Shock Spring...

Add to Cart

(D)Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.7mm) — Team Associated

(D)Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.7mm)

$24.80

Team Associated Factory Team Thin 12mm Big Bore Flat Shock Pistons are cut to make them thinner than a standard piston and measure approximately 1.75mm thick. The shocks feature two 1.7mm holes.    These thinner shock pistons give you less...

Add to Cart

EcoPower 30x30x10mm High Speed Lightweight HV Cooling Fan (21,000RPM) — ECO Power

EcoPower 30x30x10mm High Speed Lightweight HV Cooling Fan (21,000RPM)

$12.90

The EcoPower 30x30x10mm High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check.  NOTE: This fan should be installed at least 5mm away from the motor to allow sufficient air flow and prevent magnet...

Add to Cart

JConcepts - B6.4 Fin Titanium Turnbuckle Set - 3.5 x 46mm — JConcepts

JConcepts - B6.4 Fin Titanium Turnbuckle Set - 3.5 x 46mm

$59.00

JConcepts is Titanium with the introduction of the 3.5mm Fin turnbuckle sets designed specifically for style, durability, and performance. The base of the design is centered around a .143” titanium hex size which gradually tapers down into a 3.5mm...

Sold Out

JConcepts - CARPET/ASTRO HIGH-CLEARANCE REAR WING — JConcepts

JConcepts - CARPET/ASTRO HIGH-CLEARANCE REAR WING

$22.00

A new High-Clearance Wing has been developed and manufactured by JConcepts Inc. The HCW incorporates a short-chord design for quick rotation and a flat-base which provides more tire clearance. As the carpet and Astroturf conditions become more prevalent,...

Sold Out

JConcepts B6/B6D Fin Titanium Turnbuckle Set (Black) (6) — JConcepts

JConcepts B6/B6D Fin Titanium Turnbuckle Set (Black) (6)

$62.00

The JConcepts B6 Fin Titanium Turnbuckle Set was designed for style, durability and performance. The focus of the styling surrounds the lengthened adjustment hex area and the “finned” cuts that rotate about the center. The base of the shafts...

Add to Cart

Reedy 12awg Pro Silicone Wire (Black) (1 Meter) — Reedy

Reedy 12awg Pro Silicone Wire (Black) (1 Meter)

$17.20

This is a 1 meter length of Reedy 12awg Pro Silicone Wire. 12 AWG gauge wire features 1740 strands of high grade copper wire and a 4.0mm outer diameter. Reedy’s Pro Silicone Wire was developed for the experienced racer who demands maximum power output,...

Add to Cart

Reedy 13awg Pro Silicone Wire (Black) (1 Meter) — Reedy

Reedy 13awg Pro Silicone Wire (Black) (1 Meter)

$17.50

This is a 1 meter long piece of Reedy 13awg Pro Silicone Wire in Black color. Reedy’s 13-Gauge Pro Silicone Wire is pure copper and pre-tinned for easy soldering. A heavy-duty silicone insulation protects the wire from cuts while maintaining maximum...

Add to Cart

Team Associated 12mm Hex 2.2 Front Buggy Wheels (2) (B6) (White) — Team Associated

Team Associated 12mm Hex 2.2 Front Buggy Wheels (2) (B6) (White)

$14.90

This is a set of two optional Team Associated 2.2 1/10 buggy front wheels with a 12mm hex. Use these for your front wheels for 2wd offroad buggies on dirt

Add to Cart

Team Associated 12mm Hex 2.2 Front Buggy Wheels (2) (B6) (Yellow) — Team Associated

Team Associated 12mm Hex 2.2 Front Buggy Wheels (2) (B6) (Yellow)

$14.90

This is a set of two optional Team Associated 2.2 1/10 buggy front wheels with a 12mm hex. Use these for your front wheels for 2wd offroad buggies on dirt

Add to Cart

Team Associated 12mm Shock Collar & Seal Retainer Set (Black) — Team Associated

Team Associated 12mm Shock Collar & Seal Retainer Set (Black)

$26.50

Team Associated 12mm Shock Collar & Seal Retainer Set. Package includes optional shock spring pre-load collars, lower shock caps and o-rings. These are compatible with the B6.1, B6.2, B6.3 SC6.1, SC6.2, T6.1 and T6.2 models. This part fits the...

Add to Cart

Team Associated 12x23mm V2 Shock Bodies — Team Associated

Team Associated 12x23mm V2 Shock Bodies

$46.30

Add to Cart

Team Associated 12x27.5 V2 Rear Shock Body (2) — Team Associated

Team Associated 12x27.5 V2 Rear Shock Body (2)

$46.30

This is a pack of two replacement Team Associated 12x27.5 V2 Shock Bodies.

Add to Cart

Team Associated 15.5mm Aluminum FT Clamping Servo Horn (25T-Futaba/Savox/ProTek) — Team Associated

Team Associated 15.5mm Aluminum FT Clamping Servo Horn (25T-Futaba/Savox/ProTek)

$33.80

This is the Team Associated Factory Team 15.5mm 25 Tooth Aluminum Clamping Servo Horn. Made for 6-series off-road vehicles, this 7075-T6 aluminum clamping servo horn comes with a large M2.5 screw and laser-etched spline size for positive identification...

Add to Cart

Team Associated 3/32" Carbide Diff Balls (14) — Team Associated

Team Associated 3/32" Carbide Diff Balls (14)

$22.50

This is a pack of 14 optional 3/32" carbide differential balls for Team Associated cars and trucks. These will also work with any other vehicle that requires 3/32" differential balls. This part fits the following vehicles: B44 DR10 Pro2...

Add to Cart

Team Associated 4mm Heavy Duty Ball Stud Set (8) — Team Associated

Team Associated 4mm Heavy Duty Ball Stud Set (8)

$31.50

This is a replacement set of eight Team Associated 4mm Heavy Duty Ballstuds for use on the RC10B5 and RC10B5M kits.

Add to Cart

Team Associated 5/64" Precision Differential Thrust Ball (6) — Team Associated

Team Associated 5/64" Precision Differential Thrust Ball (6)

$5.90

This is a set of six replacement differential thrust balls for the Team Associated vehicles. These balls go in the differential around the thrust bolt.

Add to Cart

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2) — Team Associated

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2)

$24.80

This is a replacement Team Associated 7mm Clamping Wheel Hex Set, intended for use with the RC10 B5M Factory Lite kit. These hexes can be used optionally with the T5M to produce the stock offset. Additionally, these hexes can also be used with the B5 and...

Add to Cart

Team Associated 8.5mm Factory Team Aluminum Clamping Wheel Hex (2) — Team Associated

Team Associated 8.5mm Factory Team Aluminum Clamping Wheel Hex (2)

$26.50

This is a pack of two optional Team Associated 8.5mm Aluminum Clamping Wheel Hexes. These hexes also includes two axle pins and hex screws.

Add to Cart

Team Associated AE Branding Decal Sheet — Team Associated

Team Associated AE Branding Decal Sheet

$13.20

Team Associated AE Branding Decal Sheet. This decal sheet features many brandings Team Associated is known for. Package includes one decal sheet.

Add to Cart

Team Associated Aluminum Servo Washers (Black) — Team Associated

Team Associated Aluminum Servo Washers (Black)

$13.30

Team Associated Aluminum Servo Washers. Gain more secure servo mounting with these aluminum servo washers. They preserve the structural integrity of the servo ears. Package includes four washers. Features: Machined from aluminum and anodized...

Add to Cart

Team Associated B6 Factory Team Graphite Servo Chassis Plate (5g) — Team Associated

Team Associated B6 Factory Team Graphite Servo Chassis Plate (5g)

$29.80

Weighing just 5 grams, this Factory Team graphite servo tray installs under your servo for added bling.

Add to Cart

Team Associated B6 Front Hinge Pin Brace — Team Associated

Team Associated B6 Front Hinge Pin Brace

$6.70

Team Associated B6 Front Hinge Pin Brace. This is the replacement front hinge pin brace for the RC10 B6, B6.1 and B6.2 models, as well as the RC10 SC6.1 and T6.1 models. Package includes one hinge pin brace.

Add to Cart

Team Associated B6 Steel Chassis Weight (36g) — Team Associated

Team Associated B6 Steel Chassis Weight (36g)

$29.80

This is an optional Team Associated 36 Gram Steel Chassis Weight for the B6 and B6D buggies. Package also includes four mounting screws. This part fits the following vehicles: RC10B6.1 RC10B6.1D RC10B6.1DL RC10B6.1 Factory Lite RC10T6.1 RC10SC6...

Add to Cart

Team Associated B6 Steel Servo Chassis Weight (24g) — Team Associated

Team Associated B6 Steel Servo Chassis Weight (24g)

$33.80

This is an optional Team Associated 24 Gram Steel Chassis Weight for the B6 and B6D buggies. Package also includes two mounting screws. This part fits the following vehicles: RC10B6.1 RC10B6.1D RC10B6.1DL RC10B6.1 Factory Lite RC10T6.1 RC10SC6...

Add to Cart

Team Associated B6.1/B6.1D Anti-Roll Bar Hardware — Team Associated

Team Associated B6.1/B6.1D Anti-Roll Bar Hardware

$33.90

Team Associated B6.1/B6.1D Anti-Roll Bar Hardware. This is the replacement hardware set for the B6.1 series roll bar. Package includes pivot balls, stop blocks and hardware. This hardware pack does not include ball cups, purchase them here...

Add to Cart

Team Associated B6.1/B6.1D FT Front Anti-roll Bar Set — Team Associated

Team Associated B6.1/B6.1D FT Front Anti-roll Bar Set

$26.50

This is a replacement Team Associated B6.1/B6.1D FT Front Anti-roll Bar Set, including three bars. Effects of Front Roll Bar Adjustment Stiffness Characteristic Softer Increased Front Chassis Roll Increased Front Traction Decreased Rear...

Add to Cart

Team Associated Caged Thrust Bearing Set — Team Associated

Team Associated Caged Thrust Bearing Set

$13.30

The Team Associated Caged Thrust Bearing Set is the perfect option to increase precision in your ball differential. This bearing set is intended for the RC10B6.3D, B6.2D, B6.1D, B6D, T6.1, SC6.1, T6.2 and SC6.2. The thrust balls ride in two V-grooved...

Add to Cart

Team Associated Factory Team 1/10 Front One-Piece Carbon Fiber Wing Button — Team Associated

Team Associated Factory Team 1/10 Front One-Piece Carbon Fiber Wing Button

$11.60

Team Associated Factory Team 1/10 Front One-Piece Carbon Fiber Wing Button. This optional one-piece carbon fiber wing button offers strength, style and convenience to your 1/10 vehicle. Constructed from high quality carbon fiber this wing button offers...

Add to Cart

Team Associated Factory Team 1/10 Rear One-Piece Carbon Fiber Wing Button — Team Associated

Team Associated Factory Team 1/10 Rear One-Piece Carbon Fiber Wing Button

$13.20

Team Associated Factory Team 1/10 Rear One-Piece Carbon Fiber Wing Button. This optional one-piece carbon fiber wing button offers strength, style and convenience to your 1/10 vehicle. Constructed from high quality carbon fiber this wing button offers...

Add to Cart

Team Associated Factory Team 1/4 oz. Chassis Weights (2oz) — Team Associated

Team Associated Factory Team 1/4 oz. Chassis Weights (2oz)

$10.00

This is a pack of self stick chassis weights from Team Associated. These self stick weights can be used to balance your chassis. Package includes a total of 2oz of weight. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3...

Add to Cart

Team Associated Factory Team 12mm V2 2mm Shock Piston (4) (2x1.5mm) — Team Associated

Team Associated Factory Team 12mm V2 2mm Shock Piston (4) (2x1.5mm)

$29.80

Team Associated Factory Team 12mm V2 2mm Shock Pistons are a great tuning option for 12mm off-road shocks. The 2mm thickness V2 shock pistons decrease damping and pack compared to the standard 2.5mm thickness kit pistons. Keeping the same 2-hole valving,...

Add to Cart

Team Associated Factory Team 12mm V2 2mm Shock Piston (4) (2x1.6mm) — Team Associated

Team Associated Factory Team 12mm V2 2mm Shock Piston (4) (2x1.6mm)

$29.80

Team Associated Factory Team 12mm V2 2mm Shock Pistons are a great tuning option for 12mm off-road shocks. The 2mm thickness V2 shock pistons decrease damping and pack compared to the standard 2.5mm thickness kit pistons. Keeping the same 2-hole valving,...

Add to Cart

Team Associated Factory Team 12mm V2 2mm Shock Piston (4) (2x1.7mm) — Team Associated

Team Associated Factory Team 12mm V2 2mm Shock Piston (4) (2x1.7mm)

$29.80

Team Associated Factory Team 12mm V2 2mm Shock Pistons are a great tuning option for 12mm off-road shocks. The 2mm thickness V2 shock pistons decrease damping and pack compared to the standard 2.5mm thickness kit pistons. Keeping the same 2-hole valving,...

Add to Cart

Team Associated Factory Team 15.5mm Aluminum Servo Horn (25T) — Team Associated

Team Associated Factory Team 15.5mm Aluminum Servo Horn (25T)

$30.50

Team Associated Factory Team 15.5mm Aluminum 25 Tooth Servo Horn. This is an optional servo horn designed for the RC10 B6 and B6D 1/10 buggies. 25T fits Futaba, ProTek, Savox and most other 25T servos. This part fits the following...

Add to Cart

Team Associated Factory Team 3mm Aluminum Flanged Locknut (Blue) (10) — Team Associated

Team Associated Factory Team 3mm Aluminum Flanged Locknut (Blue) (10)

$28.20

This is a pack of ten optional Team Associated Factory Team 3mm Aluminum Lock Nuts, and are intended for use with the Team Associated MGT and MGT8.0 Monster Trucks, RC18 line of vehicles and RC8 line of vehicles. This part fits the following...

Add to Cart

Team Associated Factory Team 5x12x4mm Bearing (4) — Team Associated

Team Associated Factory Team 5x12x4mm Bearing (4)

$14.90

This is a set of Team Associated Factory Team 5x12x4mm Bearings, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy and B6.2 2WD Off-Road Buggy. Package includes four replacement bearings.

Add to Cart

Team Associated Factory Team Aluminum 48P Pinion Gear (3.17mm Bore) (17T) — Team Associated

Team Associated Factory Team Aluminum 48P Pinion Gear (3.17mm Bore) (17T)

$13.30

Team Associated Factory Team Aluminum 48P Pinion Gears are a great option to replace any standard 48 pitch pinion gear with a lightweight, hard-anodized aluminum variant. These pinions offer a slight weight savings, quicker identification, and longer...

Add to Cart

Team Associated Factory Team Aluminum 48P Pinion Gear (3.17mm Bore) (18T) — Team Associated

Team Associated Factory Team Aluminum 48P Pinion Gear (3.17mm Bore) (18T)

$13.30

Team Associated Factory Team Aluminum 48P Pinion Gears are a great option to replace any standard 48 pitch pinion gear with a lightweight, hard-anodized aluminum variant. These pinions offer a slight weight savings, quicker identification, and longer...

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top