ProTek RC Samurai RM Maifield Edition 'Drake-In' .21 Competition Nitro Engine Broken In by Adam Drake w/21j Carburetor

Description
Review
Custom Product Tab

ProTek RM Maifield Edition "Drake-In" .21 Engine - 2022 Nitro Challenge 1/8 Buggy & 1/8 Truggy Winner!!!
Adam Drake is a legend - so its no surprise that when we decided to offer a pre-run Samurai, we would take advantage of Adam's "EBIS" engine break in services. Now, the same "Oil Bath" break in service trusted by Ryan Maifield, Robert Battle, Ty Tessmann, Spencer Rivkin, Mike Truhe, and many others is now available to you, performed with the knowledge and precision that has made The Drake a legend in RC racing.

The ProTek R/C Samurai RM Maifield Edition "Drake-In" 3-Port .21 Competition Nitro Engine is Ryan Maifield's weapon of choice when he steps onto the battlefield. The Maifield Edition combines features hand picked by ProTek R/C team driver Ryan Maifield, with the proven race winning performance of the ProTek Samurai platform.

The RM Maifield Edition features a unique backplate with steel insert to reduce friction. This helps to provide increased connecting rod lifespan, a more stable idle and higher RPM, while also eliminating the risk of aluminum debris in the engine due to backplate wear. The RM Edition is paired with the proven "high power" 21j carburetor and long stroke configuration, making it a great option for large track 1/8 nitro buggy and 1/8 nitro truck racing. A low CG 9 fin "RM" cooling head, 3 port sleeve and ceramic rear bearing round out the package to create a pro-level engine that delivers the power and performance needed to win, with the reliability required to compete at the highest levels of competition.

NOTE: Backplate shown in the seventh photo is for illustrative purposes only. This part is pre-installed on the engine.

Final Run In Instructions:
Heat the engine to 180°F-200°F
Prime and start the engine. The carb has been adjusted, but you may need to make slight adjustments depending on your fuel, vehicle, weather and elevation. Overall the settings will be very close.
Tank #1 Let engine idle and heat saturate for 1-2 minutes. During this time you can fine-tune the idle adjustment and slowly apply the throttle to burn out any excess assembly oil. Start running the vehicle on the track or parking lot. The engine should be crisp on bottom to mid, but still slightly rich on top end. At the completion of the first tank, let the engine cool with the piston at bottom dead center.
Tank #2 & 3 Preheat engine and continue running on the track. If needed, you can lean in the High-Speed Needle one hour. At the completion of the 3rd tank, let the engine cool with the piston at bottom dead center.
Tank #4 Preheat engine and continue running on the track. At this point you should be close to race tune with High Speed Needle slightly rich to provide proper lubrication. The engine will continue to improve and gain fuel mileage the next ½ to full gallon of use. You should be ready to go racing!

Features:
Designed in collaboration with Ryan Maifield
Steel backplate insert to reduce friction, reduce wear, increase RPM and offer a more stable idle
Superior tunability
Low CG 9 fin "RM" cooling head
Aggressive power band
Ideal for 1/8 buggy & truck applications
6.0mm & 6.5mm circular venturis
Ceramic rear bearing
ABC piston and 3-port cylinder
Ultra hot ProTek P3 turbo glow plug
Strengthened black-coated crankcase
Utilizes 21j "High Efficiency" Carburetor

Recommended Exhaust:

PTK-2090: ProTek R/C 2090 Tuned Pipe w/Manifold

Recommended Glowplug:

PTK-2542: ProTek R/C P3 Turbo Glow Plug (Ultra Hot)

Specifications:
Displacement: 3.49cc / 0.213 cu.in.
Bore: 16.27mm/0.641in.
Stroke: 16.80mm/0.661in.
Output: 2.68ps/2.64hp/34,000 r.p.m
Practical RPM Range: 4,000-42,000 r.p.m.
Weight: 352g/12.42oz.

Includes:
(1) RM Edition "Drake-In" Off-Road .21 Engine w/21j Carburetor
(1) "Gold" P3 Turbo Glow Plug (Ultra Hot)
(1) High Temp Exhaust Gasket
(1) 6mm "Circular" Aluminum Carburetor Restrictor
(1) 6.5mm "Circular" Aluminum Carburetor Restrictor
(3) Dust Caps (3mm, 16mm & 17mm)

Write a Review

Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.