Team Associated RC10 B74 Team Kit
Comments

Team Associated RC10 B74 Team Kit

(No reviews yet) Write a Review
$899.00
SKU:
TA90026
Shipping:
Calculated at Checkout
Team Associated is proud to introduce the newest 1:10 scale 4WD electric off-road buggy kit, the RC10B74!

The off-road RC car racing scene has taken a turn over the past couple years, with turf and carpet racing becoming more popular and grip levels at an all-time high. The engineers inside Team Associated's Area 51 were quick to address this trend in the 4WD class with the RC10B74 Team Kit. This completely new chassis design, equipped with a long list of features, is designed to give you the winning edge.

Competition levels are more extreme than ever, with several manufacturers producing competitive racing platforms. The RC10B74 was designed with focus on performance and durability. New features like the easy-access, quick-change differential height make tuning for different track surfaces and ride heights quicker than ever. 7075-T6 aluminum bulkheads and arm mounts provide precision and durability, while the updated shocks with increased stroke length allow for more consistent jumping and landing. Also included, an all new rear hub assembly with a modular vertical ball stud mount and axle height insert system to allow the finest roll center adjustments possible. With many other new features, the RC10B74 Team Kit gives you all the performance and adjustability necessary to keep you racing at the front of the pack.

This vehicle needs extra parts to make it operational. Click on the Specifications tab above to see what extra equipment you'll need to make the vehicle operational, such as motor and battery pack. 

Due to ongoing R&D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, body, and pinion gear. Assembly and painting required.

Features

  • CHASSIS:
  • 2mm hard-anodized 7075-T6 aluminum chassis provides improved flex characteristics and minimal mass
  • 2.5mm graphite center bulkhead brace for improved stiffness and reduced mass
  • STEERING:
  • Ball bearing raced 7075-T6 aluminum steering rack and composite steering bellcranks with 2.5mm graphite input arm offers optimized Ackermann and adjustable steering rate
  • New steering blocks with larger outer ball bearing and increased bearing spacing for improved durability
  • DIFFS AND SLIPPER:
  • Quick-change adjustable differential height with 7075-T6 aluminum bulkheads. Four independent front and rear diff heights possible.
  • Easy-access differentials for worry-free maintenance and adjustment
  • Fluid-filled gear differentials with machined ring gears, front and rear
  • Updated 3-pad slipper assembly allows use of center differential without changing center bone length
  • SUSPENSION:
  • Optimized suspension arm geometry with improved durability and stiffness
  • New symmetric rear arms with improved geometry can be flipped to allow a "split" for rear shock mounting position
  • 7075-T6 aluminum arm mounts with optimized roll center positions use inserts, which allow fine tuning for a large range of anti-squat, kick-up, and toe adjustments
  • Common front and rear anti-roll bars to minimize spare part count
  • Anti-roll bar sets for both carpet/turf and dirt included
  • SHOCKS:
  • 4mm graphite shock towers front and rear for improved stiffness and durability
  • V2 12mm Big Bore threaded aluminum shock with X-rings for low friction assembly
  • New shock lengths front and rear with longer stroke allows increased droop and up-travel for more consistent jumping and landing
  • Machined shock pistons for more precise fit and smoother operation
  • V2 12mm shock springs for lower achievable ride height and more nimble feel
  • OTHER FEATURES:
  • CVA assemblies for center drive-line with aligned shafts for minimal torque loss and improved efficiency
  • New rear hub assembly with modular vertical ball stud camber link mounts and axle height system for precise roll center adjustments
  • Outer rear hinge pins captured with bolt head and lock nut for increased durability
  • 7075-T6 aluminum motor mount and 7075-T6 aluminum center bulkhead have increased rigidity to maintain more accurate gear mesh
  • New 2.5mm graphite battery strap with sliding support tabs for fine tuning battery position (accepts any R.O.A.R. approved 2S "shorty" packs)
  • 7075-T6 aluminum 9 degree caster blocks
  • "Floating" servo mount with 7075-T6 aluminum mount and 2.5mm graphite brace
  • Factory Team ball bearing set with 26 precision ball bearings, now oiled instead of greased for more efficient drivetrain
  • Aluminum clamping wheel hexes, front and rear
  • Lightweight clear body and clear wing included

Vehicle Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: 395mm (15.55in)
Width: varies
Wheelbase: varies
Weight: 930g (2.05lbs)
Internal
Gear Ratio:
2.50
Drive: 4WD
* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required to Complete

  • 1:10 scale 540-size electric motor with 48-pitch pinion gear
  • 1:10 scale electronic speed control
  • 7.4V LiPo or 6.0V LiFe with "shorty" battery dimensions
  • Battery charger (suited for, and particular to, one of the batteries mentioned above)
  • 2-channel surface transmitter
  • 2-channel receiver
  • Steering servo
  • Polycarbonate-specific spray paint for body
  • 1:10 scale off-road wheels and tires
  • Other helpful items needed: Silicone Shock Fluid, Silicone Diff Fluid, FT Body Scissors (#1737), thread-locking compound (#1596), FT Body Reamer (#1499), FT Hex/Nut Driver set (#1519), CA tire adhesive (#1597), Hobby Knife, Needle Nose Pliers, Wire Cutters, Soldering Iron, Calipers or Precision Ruler

Manuals/Documents

Setup Sheets

DownloadDriverTrackDate
Spencer Rivkin JConcepts Summer Indoor Nationals 07/14/2019
Indoors, dirt, high grip
Spencer Rivkin Testing 07/01/2019
Indoors, dirt, high grip, large
Joona Haatanen Euro Off-Road Series - Round #5 05/19/2019
Outdoors, astroturf, low or high grip, damp or dry, bumpy
Dustin Evans JConcepts Spring Indoor Nationals 05/19/2019
Indoors, dirt, high grip, tight
Neil Cragg BRCA National Championship Series - Round #2 05/12/2019
Outdoors, astroturf, high grip, dry, large, bumpy
Broc Champlin JConcepts Northwest Carpet Nationals 04/14/2019
Indoors, carpet, very high grip, small, tight
Dustin Evans JConcepts Northwest Carpet Nationals 04/14/2019
Indoors, carpet, large size, medium-high grip, black ozite
Broc Champlin JConcepts Western Carpet Nationals 03/24/2019

Indoors, carpet, large size, medium-high grip, black ozite

RC10 B74 SPARE PARTS

Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Related Products

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Fast & Reliable Service

We look after all our customers

Top