B3.1

Team Associated Factory Team 1/8 V3 Differential Cross Pin Set — Team Associated

Team Associated Factory Team 1/8 V3 Differential Cross Pin Set

$51.30

This is an optional Team Associated Factory Team 1/8 V3 Differential Cross Pin Set. Use this cross pin and insert set on RC8 V3 differentials to increase consistency, performance, and lifespan of the diff. Steel cross pin inserts reduce diff case...

Add to Cart

Team Associated Factory Team 16mm Big Bore Flat Shock Piston (5x1.3mm) (4) — Team Associated

Team Associated Factory Team 16mm Big Bore Flat Shock Piston (5x1.3mm) (4)

$31.70

Team Associated Factory Team 16mm Big Bore Flat Shock Piston. These optional shock pistons are designed for 1/8 Team Associated shocks with a 16mm bore. The flat pistons will travel at the same speed during compression and rebound, this will allow for...

Add to Cart

Team Associated Factory Team 16mm Big Bore Flat Shock Pistons (6x1.3mm) (2) — Team Associated

Team Associated Factory Team 16mm Big Bore Flat Shock Pistons (6x1.3mm) (2)

$29.80

Team Associated Factory Team 16mm Big Bore Flat Shock Pistons. These optional shock pistons are intended for the RC8 B3 and T3 series vehicles. Machined from high quality Delrin, these pistons will aid in dialing in suspension settings. Package includes...

Add to Cart

Team Associated Factory Team 16mm Big Bore Tapered Shock Piston (5x1.3mm) (4) — Team Associated

Team Associated Factory Team 16mm Big Bore Tapered Shock Piston (5x1.3mm) (4)

$32.30

Team Associated Factory Team 16mm Big Bore Tapered Shock Piston. These optional shock pistons feature a tapered edge allowing for a faster travel in one direction. When the tapered edge is facing up you will have faster compression. With the taper facing...

Add to Cart

Team Associated Factory Team 16mm Big Bore Tapered Shock Piston (6x1.3mm) (4) — Team Associated

Team Associated Factory Team 16mm Big Bore Tapered Shock Piston (6x1.3mm) (4)

$29.80

Team Associated Factory Team 16mm Big Bore Tapered Shock Piston. These optional shock pistons feature a tapered edge allowing for a faster travel in one direction. When the tapered edge is facing up you will have faster compression. With the taper facing...

Add to Cart

Team Associated Factory Team 16mm Big Bore Tapered Shock Piston (8x1.2mm) (2) — Team Associated

Team Associated Factory Team 16mm Big Bore Tapered Shock Piston (8x1.2mm) (2)

$18.20

Team Associated Factory Team 16mm Big Bore Tapered Shock Pistons feature a tapered profile and angled holes to help improve handling through bumps and make the car jump flatter and land better. The angled holes allow you to run lower oil weights to...

Add to Cart

Team Associated Factory Team 16mm Big Bore Tapered Shock Piston (8x1.3mm) (2) — Team Associated

Team Associated Factory Team 16mm Big Bore Tapered Shock Piston (8x1.3mm) (2)

$19.80

Team Associated Factory Team 16mm Big Bore Tapered Shock Pistons feature a tapered profile and angled holes to help improve handling through bumps and make the car jump flatter and land better. The angled holes allow you to run lower oil weights to...

Add to Cart

Team Associated Factory Team 3mm Aluminum Flanged Locknut (Blue) (10) — Team Associated

Team Associated Factory Team 3mm Aluminum Flanged Locknut (Blue) (10)

$29.70

This is a pack of ten optional Team Associated Factory Team 3mm Aluminum Lock Nuts, and are intended for use with the Team Associated MGT and MGT8.0 Monster Trucks, RC18 line of vehicles and RC8 line of vehicles. This part fits the following...

Add to Cart

Team Associated Factory Team 4-Shoe Adjustable Clutch System — Team Associated

Team Associated Factory Team 4-Shoe Adjustable Clutch System

$193.40

The Team Associated Factory Team 4-Shoe Adjustable Clutch System is a patent-pending clutch system that gives racers the ability to adjust the tension of the clutch springs -- without having to remove the clutch and change springs. In fact, the engine...

Add to Cart

Team Associated Factory Team 5x10x4mm Bearings (4) — Team Associated

Team Associated Factory Team 5x10x4mm Bearings (4)

$14.90

This is a pack of four Team Associated Factory Team 5x10x4mm Bearings. Compare your bearing size and replace your worn-out bearings or bushings. These bearings will smooth out the play in critical areas of your vehicle for all-around performance gains...

Add to Cart

Team Associated Factory Team Aluminum Throttle Servo Horn (23T - KO/Sanwa/JR) — Team Associated

Team Associated Factory Team Aluminum Throttle Servo Horn (23T - KO/Sanwa/JR)

$29.80

This is a Team Associated Factory Team Aluminum 23T Throttle Servo Horn intended for use with KO, Sanwa and JR Servos to improve durability and throttle/brake feel. This part is machined from high quality 7075 aluminum and laser-etched with Factory Team...

Add to Cart

Team Associated Factory Team Aluminum Throttle Servo Horn (25T-ProTek/Futaba) — Team Associated

Team Associated Factory Team Aluminum Throttle Servo Horn (25T-ProTek/Futaba)

$32.30

This is a Team Associated Factory Team Aluminum 23T Throttle Servo Horn intended for use with ProTek, Futaba and Savox Servos to improve durability and throttle/brake feel. This part is machined from high quality 7075 aluminum and laser-etched with...

Add to Cart

Team Associated Factory Team Aluminum Turnbuckle Ball Set (8) — Team Associated

Team Associated Factory Team Aluminum Turnbuckle Ball Set (8)

$33.10

This is an optional pack of eight Team Associated Factory Team Aluminum Turnbuckle Balls, intended for use with Team Associated RC8B3 and T3 kits. These aluminum balls are made of durable hard-anodized 7075 aluminum to prevent rust and minimize corrosion...

Add to Cart

Team Associated Factory Team Aluminum Wing Buttons (Black) — Team Associated

Team Associated Factory Team Aluminum Wing Buttons (Black)

$13.30

NEW Factory Team Aluminum Wing Buttons can be used on various vehicles such as 1:10 on- and off-road as well as 1:8 buggies and truggies. These new wing buttons help keep the wing secured during the heat of battle. The bottom side of the buttons have...

Add to Cart

Team Associated Factory Team FOX Kashima Coated 1/8 Buggy Front Shock Body 30.5mm (2) — Team Associated

Team Associated Factory Team FOX Kashima Coated 1/8 Buggy Front Shock Body 30.5mm (2)

$93.90

This is a pack of two optional Team Associated Factory Team 16x30.5mm Fox Kashima Coated Front Buggy Shock Bodies. These 16mm shocks feature the same attributes as the shock coat found on the buttery-smooth FOX Factory Series forks and shocks. This...

Add to Cart

Team Associated Factory Team FOX Kashima Coated 1/8 Buggy Rear Shock Body 39.5mm (2) — Team Associated

Team Associated Factory Team FOX Kashima Coated 1/8 Buggy Rear Shock Body 39.5mm (2)

$82.70

This is a pack of two optional Team Associated Factory Team 16x39.5mm Fox Kashima Coated Rear Buggy Shock Bodies. These 16mm shocks feature the same attributes as the shock coat found on the buttery-smooth FOX Factory Series forks and shocks. This...

Add to Cart

Team Associated Factory Team Low Friction Shock X-Rings (8) — Team Associated

Team Associated Factory Team Low Friction Shock X-Rings (8)

$31.70

The Team Associated Factory Team Low Friction Shock X-Rings are a great option for your 1:8 scale buggy or truck! These X-Ring sets are made with custom tooling for an exact fit and use high-quality material. Using these will increase performance,...

Add to Cart

Team Associated Factory Team Low Friction X-Rings (5.8 x 1.9mm) (6) — Team Associated

Team Associated Factory Team Low Friction X-Rings (5.8 x 1.9mm) (6)

$18.80

New FT Low Friction X-Rings are the perfect upgrade for your 1:8 scale buggy or truck! Both X-Ring sets are made with custom tooling for an exact fit and use the same high-quality material as used in our popular 1:10 X-rings. Use #81498 5.8 x 1.9mm size...

Add to Cart

Team Associated Factory Team RC8B3 +2° Carbon Fiber Steering Block Arm (2) — Team Associated

Team Associated Factory Team RC8B3 +2° Carbon Fiber Steering Block Arm (2)

$29.80

Team Associated Factory Team RC8B3 +2 woven-carbon fiber steering block arms for the RC8B3 and B3e increase the steering Ackermann of the vehicle, resulting in a smoother steering feel when compared to the standard steering block arm set. These optional...

Add to Cart

Team Associated Factory Team RC8B3 CVA Rebuild Kit — Team Associated

Team Associated Factory Team RC8B3 CVA Rebuild Kit

$15.80

The Team Associated Factory Team RC8B3 CVA Rebuild Kit is a replacement for RC8B3 and RC8B3e vehicles that have been equipped with the optional Factory Team RC8B3 CVA Set (81333, 81334). Package includes two CVA barrels and two pins. This part fits the...

Add to Cart

Team Associated Factory Team Steel RC8B3 CVA Axle — Team Associated

Team Associated Factory Team Steel RC8B3 CVA Axle

$41.40

Fitting CVAs into the standard front steering block and rear hub requires bearings 89162 (inner). Fitting CVAs into the Factory Team aluminum rear hubs requires bearings TA8-91564 (outer) and 89162 (inner). This part fits the following vehicles: RC8B3...

Add to Cart

Team Associated Front Suspension Spring Set (.020) — Team Associated

Team Associated Front Suspension Spring Set (.020)

$8.30

This is a replacement Team Associated Front Suspension Spring Set, and is intended for use with the Team Associated RC10L3T and RC10R50 vehicles equipped with the 1/10 Dynamic Front End Kit (8400).This is the standard spring included in the kit...

Add to Cart

Team Associated Front Suspension Spring Set (.022) — Team Associated

Team Associated Front Suspension Spring Set (.022)

$6.70

This is an optional Team Associated Front Suspension Spring Set, and is intended for use with the Team Associated RC10L3T and RC10R50 vehicles equipped with the 1/10 Dynamic Front End Kit (8400). TAU-8433 .024 Harder (less steering) TAU-8431 ...

Add to Cart

Team Associated FT Titanium Turnbuckles, 33 mm/1.30 in — Team Associated

Team Associated FT Titanium Turnbuckles, 33 mm/1.30 in

$26.50

This is a set of two optional Factory Team 1.30"/33mm titanium turnbuckles from Team Associated. These turnbuckles are used for the steering linkage. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3.1e

Add to Cart

Team Associated Fuel Tubing (15in) — Team Associated

Team Associated Fuel Tubing (15in)

$7.50

Team Associated fuel tubing for Nitro vehicles. This part fits the following vehicles: RC8B3.1 RC8T3.1 RC8B3 RC8T3 RC8B RC8 RC8.2 SC8 SC10GT MGT 8.0 NDS

Add to Cart

Team Associated Large Body Clip Set (6) — Team Associated

Team Associated Large Body Clip Set (6)

$8.30

This is a replacement Team Associated Large Body Clip Set. These are the larger, heavy duty body clips used with Associated 1/8 scale vehicles. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3.1e RC8B3 RC8B3e RC8T3 RC8T3e

Add to Cart

Team Associated Locknut (for RC8 piston) (10) — Team Associated

Team Associated Locknut (for RC8 piston) (10)

$5.00

This is a pack of ten replacement lock nuts for the Team Associated off-road buggy. These lock nuts are used to secure the shock piston to the shock shaft. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3...

Add to Cart

Team Associated M3 Flanged Locknut (10) — Team Associated

Team Associated M3 Flanged Locknut (10)

$10.00

This is a pack of ten Team Associated 3mm Lock Nuts, and are intended for use with the Team Associated MGT and MGT8.0 Monster Trucks, RC18 line of vehicles and RC8 line of vehicles.

Add to Cart

Team Associated M4 Locknut (10) — Team Associated

Team Associated M4 Locknut (10)

$5.00

This is a pack of ten replacement M4 lock nuts for the Team Associated off-road buggy. This part fits the following vehicles: Enduro Enduro Trail Truck RC8B3.1 RC8B3.1e RC8T3.1 RC8T3.1e RC8B3 RC8B3e RC8T3 RC8T3e RC8Be RC8Te RC8.2e RC8 SC8.2e

Add to Cart

Team Associated RC8 B3 16mm Shock Collar and Seal Retainer Set (Black) — Team Associated

Team Associated RC8 B3 16mm Shock Collar and Seal Retainer Set (Black)

$28.20

Direct swap for the stock blue shock collars and seal retainers--perfect for customizing your ride! Set of black anodized aluminum parts with retainers is for two shocks. Fits: RC8B3.2, RC8B3.2e, RC8T3.2, RC8T3.2e, and all older RC8B3 platform vehicles.

Add to Cart

Team Associated RC8 B3 Factory Team Aluminum Rear Hub Inserts (2) — Team Associated

Team Associated RC8 B3 Factory Team Aluminum Rear Hub Inserts (2)

$14.90

The Team Associated RC8B3 Factory Team Aluminum Rear Hub Inserts are compatible with RC8B3 buggies equipped with the optional Aluminum Rear Hubs (TA8U-81077). Package includes six plastic bearing inserts and eight hinge pin inserts (four offset, four...

Add to Cart

Team Associated RC8 B3.1 Factory Team Graphite Rear Shock Tower (Tall) — Team Associated

Team Associated RC8 B3.1 Factory Team Graphite Rear Shock Tower (Tall)

$66.20

This is a replacement Team Associated RC8 B3.1 Tall Rear Shock Tower. This shock tower is precision made from graphite material with the taller tower geometry increasing up-travel, how much further the shock can travel upwards in its stroke after the...

Add to Cart

Team Associated RC8 B3.1 LTC Differential Gear Set — Team Associated

Team Associated RC8 B3.1 LTC Differential Gear Set

$29.90

This is a replacement Team Associated LTC Differential Gear Set for the RC8B3.1 and RC8B3.1e. Includes: (2) Differential Sun Gears, 18 Tooth (4) Differential Planet Gears, 10 Tooth (2) Differential Cross Pins (2) Shims, 3.5 x 12 x 0.12mm, black (2)...

Add to Cart

Team Associated RC8 Droop Screw (4) — Team Associated

Team Associated RC8 Droop Screw (4)

$16.60

This is a pack of four replacement Team Associated Droop Screws. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3.1e RC8B3 RC8B3e RC8T3 RC8T3e RC8B RC8Be RC8T RC8Te RC8.2 RC8.2e SC8e

Add to Cart

Team Associated RC8B3 +1mm Offset Wheel Hex (2) — Team Associated

Team Associated RC8B3 +1mm Offset Wheel Hex (2)

$19.90

This is a pack of two optional Team Associated +1mm Offset Wheel Hexes. Optional width wheel hexes alter the vehicle's handling by changing steering feel and vehicle roll stiffness. Wheel hex width is a great way to add or reduce effective steering and...

Add to Cart

Team Associated RC8B3 +2mm Offset Wheel Hex Set (2) — Team Associated

Team Associated RC8B3 +2mm Offset Wheel Hex Set (2)

$21.50

This is a pack of two optional Team Associated +2mm Offset Wheel Hexes. Optional width wheel hexes alter the vehicle's handling by changing steering feel and vehicle roll stiffness. Wheel hex width is a great way to add or reduce effective steering and...

Add to Cart

Team Associated RC8B3 106mm Center-Rear Universal Driveshaft — Team Associated

Team Associated RC8B3 106mm Center-Rear Universal Driveshaft

$64.60

This is a replacement Team Associated 106mm Center Universal Driveshaft, intended for use with the RC8B3 Nitro Buggy. This driveshaft is assembled and ready for installation, but does not include a set screw, which is required. This driveshaft is used...

Add to Cart

Team Associated RC8B3 30.5 mm Front Shock Body (2) — Team Associated

Team Associated RC8B3 30.5 mm Front Shock Body (2)

$57.90

This is a pack of two replacement Team Associated 30.5mm Shock Bodies, intended for use on the front shocks of the RC8B3 Nitro Buggy. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3.1e RC8B3 RC8B3e RC8T3 RC8T3e

Add to Cart

Team Associated RC8B3 39.5mm Rear Shock Body (2) — Team Associated

Team Associated RC8B3 39.5mm Rear Shock Body (2)

$57.90

This is a pack of two replacement Team Associated 39.5mm Shock Bodies, intended for use on the rear shocks of the RC8B3 Nitro Buggy. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3.1e RC8B3 RC8B3e RC8T3 RC8T3e

Add to Cart

Team Associated RC8B3 76mm Center Front Universal — Team Associated

Team Associated RC8B3 76mm Center Front Universal

$59.20

This is a replacement Team Associated 76mm Center Universal, intended for use with the RC8B3 Nitro Buggy. This package does not include a set screw, which is required during installation. This drive shaft is used in the front of the center driveline,...

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top