T3.1

Team Associated Factory Team 4-Shoe Adjustable Clutch System — Team Associated

Team Associated Factory Team 4-Shoe Adjustable Clutch System

$193.40

The Team Associated Factory Team 4-Shoe Adjustable Clutch System is a patent-pending clutch system that gives racers the ability to adjust the tension of the clutch springs -- without having to remove the clutch and change springs. In fact, the engine...

Add to Cart

Team Associated Factory Team 5x10x4mm Bearings (4) — Team Associated

Team Associated Factory Team 5x10x4mm Bearings (4)

$14.90

This is a pack of four Team Associated Factory Team 5x10x4mm Bearings. Compare your bearing size and replace your worn-out bearings or bushings. These bearings will smooth out the play in critical areas of your vehicle for all-around performance gains...

Add to Cart

Team Associated Factory Team 5x8x2.5mm Bearings — Team Associated

Team Associated Factory Team 5x8x2.5mm Bearings

$16.60

Team Associated Factory Team 5x8x2.5mm Bearings. Package includes four hybrid seal 5x8x2.5mm bearings. This part fits the following vehicles: RC10F6 RC12R6 TC7.2

Add to Cart

Team Associated Factory Team Aluminum Throttle Servo Horn (23T - KO/Sanwa/JR) — Team Associated

Team Associated Factory Team Aluminum Throttle Servo Horn (23T - KO/Sanwa/JR)

$29.80

This is a Team Associated Factory Team Aluminum 23T Throttle Servo Horn intended for use with KO, Sanwa and JR Servos to improve durability and throttle/brake feel. This part is machined from high quality 7075 aluminum and laser-etched with Factory Team...

Add to Cart

Team Associated Factory Team Aluminum Throttle Servo Horn (25T-ProTek/Futaba) — Team Associated

Team Associated Factory Team Aluminum Throttle Servo Horn (25T-ProTek/Futaba)

$32.30

This is a Team Associated Factory Team Aluminum 23T Throttle Servo Horn intended for use with ProTek, Futaba and Savox Servos to improve durability and throttle/brake feel. This part is machined from high quality 7075 aluminum and laser-etched with...

Add to Cart

Team Associated Factory Team Aluminum Turnbuckle Ball Set (8) — Team Associated

Team Associated Factory Team Aluminum Turnbuckle Ball Set (8)

$33.10

This is an optional pack of eight Team Associated Factory Team Aluminum Turnbuckle Balls, intended for use with Team Associated RC8B3 and T3 kits. These aluminum balls are made of durable hard-anodized 7075 aluminum to prevent rust and minimize corrosion...

Add to Cart

Team Associated Factory Team Aluminum Wing Buttons (Black) — Team Associated

Team Associated Factory Team Aluminum Wing Buttons (Black)

$13.30

NEW Factory Team Aluminum Wing Buttons can be used on various vehicles such as 1:10 on- and off-road as well as 1:8 buggies and truggies. These new wing buttons help keep the wing secured during the heat of battle. The bottom side of the buttons have...

Add to Cart

Team Associated Factory Team FOX Kashima Coated 1/8 Buggy Front Shock Body 30.5mm (2) — Team Associated

Team Associated Factory Team FOX Kashima Coated 1/8 Buggy Front Shock Body 30.5mm (2)

$93.90

This is a pack of two optional Team Associated Factory Team 16x30.5mm Fox Kashima Coated Front Buggy Shock Bodies. These 16mm shocks feature the same attributes as the shock coat found on the buttery-smooth FOX Factory Series forks and shocks. This...

Add to Cart

Team Associated Factory Team FOX Kashima Coated 1/8 Buggy Rear Shock Body 39.5mm (2) — Team Associated

Team Associated Factory Team FOX Kashima Coated 1/8 Buggy Rear Shock Body 39.5mm (2)

$82.70

This is a pack of two optional Team Associated Factory Team 16x39.5mm Fox Kashima Coated Rear Buggy Shock Bodies. These 16mm shocks feature the same attributes as the shock coat found on the buttery-smooth FOX Factory Series forks and shocks. This...

Add to Cart

Team Associated Factory Team Low Friction Shock X-Rings (8) — Team Associated

Team Associated Factory Team Low Friction Shock X-Rings (8)

$31.70

The Team Associated Factory Team Low Friction Shock X-Rings are a great option for your 1:8 scale buggy or truck! These X-Ring sets are made with custom tooling for an exact fit and use high-quality material. Using these will increase performance,...

Add to Cart

Team Associated Factory Team Low Friction X-Rings (5.8 x 1.9mm) (6) — Team Associated

Team Associated Factory Team Low Friction X-Rings (5.8 x 1.9mm) (6)

$18.80

New FT Low Friction X-Rings are the perfect upgrade for your 1:8 scale buggy or truck! Both X-Ring sets are made with custom tooling for an exact fit and use the same high-quality material as used in our popular 1:10 X-rings. Use #81498 5.8 x 1.9mm size...

Add to Cart

Team Associated Factory Team RC8B3 +2° Carbon Fiber Steering Block Arm (2) — Team Associated

Team Associated Factory Team RC8B3 +2° Carbon Fiber Steering Block Arm (2)

$29.80

Team Associated Factory Team RC8B3 +2 woven-carbon fiber steering block arms for the RC8B3 and B3e increase the steering Ackermann of the vehicle, resulting in a smoother steering feel when compared to the standard steering block arm set. These optional...

Add to Cart

Team Associated Factory Team RC8B3 CVA Rebuild Kit — Team Associated

Team Associated Factory Team RC8B3 CVA Rebuild Kit

$15.80

The Team Associated Factory Team RC8B3 CVA Rebuild Kit is a replacement for RC8B3 and RC8B3e vehicles that have been equipped with the optional Factory Team RC8B3 CVA Set (81333, 81334). Package includes two CVA barrels and two pins. This part fits the...

Add to Cart

Team Associated Factory Team Steel RC8B3 CVA Axle — Team Associated

Team Associated Factory Team Steel RC8B3 CVA Axle

$41.40

Fitting CVAs into the standard front steering block and rear hub requires bearings 89162 (inner). Fitting CVAs into the Factory Team aluminum rear hubs requires bearings TA8-91564 (outer) and 89162 (inner). This part fits the following vehicles: RC8B3...

Add to Cart

Team Associated Front Suspension Spring Set (.020) — Team Associated

Team Associated Front Suspension Spring Set (.020)

$8.30

This is a replacement Team Associated Front Suspension Spring Set, and is intended for use with the Team Associated RC10L3T and RC10R50 vehicles equipped with the 1/10 Dynamic Front End Kit (8400).This is the standard spring included in the kit...

Add to Cart

Team Associated Front Suspension Spring Set (.022) — Team Associated

Team Associated Front Suspension Spring Set (.022)

$6.70

This is an optional Team Associated Front Suspension Spring Set, and is intended for use with the Team Associated RC10L3T and RC10R50 vehicles equipped with the 1/10 Dynamic Front End Kit (8400). TAU-8433 .024 Harder (less steering) TAU-8431 ...

Add to Cart

Team Associated FT Titanium Turnbuckles, 33 mm/1.30 in — Team Associated

Team Associated FT Titanium Turnbuckles, 33 mm/1.30 in

$26.50

This is a set of two optional Factory Team 1.30"/33mm titanium turnbuckles from Team Associated. These turnbuckles are used for the steering linkage. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3.1e

Add to Cart

Team Associated Fuel Tubing (15in) — Team Associated

Team Associated Fuel Tubing (15in)

$7.50

Team Associated fuel tubing for Nitro vehicles. This part fits the following vehicles: RC8B3.1 RC8T3.1 RC8B3 RC8T3 RC8B RC8 RC8.2 SC8 SC10GT MGT 8.0 NDS

Add to Cart

Team Associated Large Body Clip Set (6) — Team Associated

Team Associated Large Body Clip Set (6)

$8.30

This is a replacement Team Associated Large Body Clip Set. These are the larger, heavy duty body clips used with Associated 1/8 scale vehicles. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3.1e RC8B3 RC8B3e RC8T3 RC8T3e

Add to Cart

Team Associated Locknut (for RC8 piston) (10) — Team Associated

Team Associated Locknut (for RC8 piston) (10)

$5.00

This is a pack of ten replacement lock nuts for the Team Associated off-road buggy. These lock nuts are used to secure the shock piston to the shock shaft. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3...

Add to Cart

Team Associated M3 Flanged Locknut (10) — Team Associated

Team Associated M3 Flanged Locknut (10)

$10.00

This is a pack of ten Team Associated 3mm Lock Nuts, and are intended for use with the Team Associated MGT and MGT8.0 Monster Trucks, RC18 line of vehicles and RC8 line of vehicles.

Add to Cart

Team Associated M4 Aluminum Flange Locknut (6) — Team Associated

Team Associated M4 Aluminum Flange Locknut (6)

$17.90

This is a pack of six replacement Team Associated M4 Aluminum Flange Locknuts. These blue anodized aluminum lock nuts not only look good, but also reduce the weight of rotational mass. This part fits the following vehicles: RC10B74 RC10B6.1 RC10B6...

Add to Cart

Team Associated M4 Locknut (10) — Team Associated

Team Associated M4 Locknut (10)

$5.00

This is a pack of ten replacement M4 lock nuts for the Team Associated off-road buggy. This part fits the following vehicles: Enduro Enduro Trail Truck RC8B3.1 RC8B3.1e RC8T3.1 RC8T3.1e RC8B3 RC8B3e RC8T3 RC8T3e RC8Be RC8Te RC8.2e RC8 SC8.2e

Add to Cart

Team Associated RC8 B3 16mm Shock Collar and Seal Retainer Set (Black) — Team Associated

Team Associated RC8 B3 16mm Shock Collar and Seal Retainer Set (Black)

$28.20

Direct swap for the stock blue shock collars and seal retainers--perfect for customizing your ride! Set of black anodized aluminum parts with retainers is for two shocks. Fits: RC8B3.2, RC8B3.2e, RC8T3.2, RC8T3.2e, and all older RC8B3 platform vehicles.

Add to Cart

Team Associated RC8 B3.1 LTC Differential Gear Set — Team Associated

Team Associated RC8 B3.1 LTC Differential Gear Set

$29.90

This is a replacement Team Associated LTC Differential Gear Set for the RC8B3.1 and RC8B3.1e. Includes: (2) Differential Sun Gears, 18 Tooth (4) Differential Planet Gears, 10 Tooth (2) Differential Cross Pins (2) Shims, 3.5 x 12 x 0.12mm, black (2)...

Add to Cart

Team Associated RC8 Droop Screw (4) — Team Associated

Team Associated RC8 Droop Screw (4)

$16.60

This is a pack of four replacement Team Associated Droop Screws. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3.1e RC8B3 RC8B3e RC8T3 RC8T3e RC8B RC8Be RC8T RC8Te RC8.2 RC8.2e SC8e

Add to Cart

Team Associated RC8B3 30.5 mm Front Shock Body (2) — Team Associated

Team Associated RC8B3 30.5 mm Front Shock Body (2)

$57.90

This is a pack of two replacement Team Associated 30.5mm Shock Bodies, intended for use on the front shocks of the RC8B3 Nitro Buggy. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3.1e RC8B3 RC8B3e RC8T3 RC8T3e

Add to Cart

Team Associated RC8B3 39.5mm Rear Shock Body (2) — Team Associated

Team Associated RC8B3 39.5mm Rear Shock Body (2)

$57.90

This is a pack of two replacement Team Associated 39.5mm Shock Bodies, intended for use on the rear shocks of the RC8B3 Nitro Buggy. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3.1e RC8B3 RC8B3e RC8T3 RC8T3e

Add to Cart

Team Associated RC8B3 76mm Center Front Universal — Team Associated

Team Associated RC8B3 76mm Center Front Universal

$59.20

This is a replacement Team Associated 76mm Center Universal, intended for use with the RC8B3 Nitro Buggy. This package does not include a set screw, which is required during installation. This drive shaft is used in the front of the center driveline,...

Add to Cart

Team Associated RC8B3 Aluminum Engine Mount Set — Team Associated

Team Associated RC8B3 Aluminum Engine Mount Set

$62.80

This is a replacement Team Associated Aluminum Engine Mount Set. This set includes one left and one right side engine block, made from aluminum alloy material and anodized factory team blue. This part fits the following vehicles: RC8B3.1 RC8T3...

Add to Cart

Team Associated RC8B3 Aluminum Engine Mount Washer (4) — Team Associated

Team Associated RC8B3 Aluminum Engine Mount Washer (4)

$16.60

This is a pack of four replacement Team Associated Aluminum Engine Mount Washers, intended for use with the RC8B3 Nitro Buggy. These washers are intended for use with M4 countersunk screws only. This part fits the following vehicles: RC8B3.1 RC8T3...

Add to Cart

Team Associated RC8B3 Aluminum Steering Block Arm (2) — Team Associated

Team Associated RC8B3 Aluminum Steering Block Arm (2)

$21.50

This is a pack of two replacement Team Associated Aluminum Steering Block Arms, intended for use with the RC8B3 Nitro Buggy. These arms are directional, with the package including one left and one right side arm. This part fits the following...

Add to Cart

Team Associated RC8B3 Aluminum Suspension Arm End Cap (4) — Team Associated

Team Associated RC8B3 Aluminum Suspension Arm End Cap (4)

$26.50

This is a pack of four replacement Team Associated Suspension Arm End Caps, intended for use with the RC8B3 Nitro Buggy. These caps are made from aluminum alloy material and anodized factory team blue. This part fits the following vehicles: RC8B3...

Add to Cart

Team Associated RC8B3 Aluminum Upper Link Mount — Team Associated

Team Associated RC8B3 Aluminum Upper Link Mount

$43.00

This is a replacement Team Associated Aluminum Upper Link Mount, intended for use with the RC8B3 Nitro Buggy. This 7mm thick upper mount is made from aluminum alloy material and anodized factory team blue. This part fits the following vehicles: RC8B3...

Add to Cart

Team Associated RC8B3 Arm Mount Insert Set — Team Associated

Team Associated RC8B3 Arm Mount Insert Set

$11.60

This is a replacement Team Associated Arm Mount Insert Set, intended for use with the Team Associated RC8B3 Nitro Buggy. This part fits the following vehicles: RC8B3.1 RC8B3.1e RC8T3.1 RC8T3.1e RC8B3 RC8B3e RC8T3 RC8T3e

Add to Cart

Team Associated RC8B3 Brake Cam Set — Team Associated

Team Associated RC8B3 Brake Cam Set

$29.80

This is a replacement Team Associated Brake Cam Set. This set includes two brake cams used with the RC8B3 Nitro Buggy. This part fits the following vehicles: RC8B3.1 RC8T3.1 RC8B3 RC8T3

Add to Cart

Team Associated RC8B3 Brake Lever (2) — Team Associated

Team Associated RC8B3 Brake Lever (2)

$5.00

This is a pack of two replacement Team Associated Brake Levers. This part fits the following vehicles: RC8B3.1 RC8T3.1 RC8B3 RC8T3

Add to Cart

Team Associated RC8B3 Brake Pad Spring — Team Associated

Team Associated RC8B3 Brake Pad Spring

$8.30

This is a pack of four replacement Team Associated Brake Pad Springs, intended for use with the Team Associated RC8B3 Nitro Buggy. These springs are also included with the Brake Pad Set (TA8-81039). This part fits the following vehicles: RC8B3.1 RC8T3...

Add to Cart

Team Associated RC8B3 Brake Pads & Springs — Team Associated

Team Associated RC8B3 Brake Pads & Springs

$57.90

This is a pack of four replacement Team Associated Brake Pads, intended for use with the RC8B3 Nitro Buggy. This package also includes four brake springs, which can also be purchased separately (TA8-81038). This part fits the following vehicles: RC8B3...

Add to Cart

Team Associated RC8B3 Center Bulkhead Set — Team Associated

Team Associated RC8B3 Center Bulkhead Set

$16.60

This is a replacement Team Associated Center Bulkhead, intended for use with the RC8B3. This package includes the front and backside bulkhead halves, as well as the disc brake braces. This part fits the following vehicles: RC8B3.1 RC8T3.1 RC8B3 RC8T3

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top