Accessories

2CH Remote LED Light Switch Adaptor — Hobby Station

2CH Remote LED Light Switch Adaptor

$12.00

This adaptor allows you to switch on and off remotely for the LED Lights installed on your RC car.

Sold Out

Acuvance - Power Transmission Connector (4mm) Female — Acuvance

Acuvance - Power Transmission Connector (4mm) Female

$10.00

OP-87343 Female 《L》 φ4.0mm L=14mm OP-87345 Female 《S》 φ4.0mm L=10mm    We focused on dimensional accracy to minimize the cpntact resistance with gold plating. As a result a large current is efficientry transmitted. The female...

Sold Out

Acuvance - Power Transmission Connector (4mm) Male — Acuvance

Acuvance - Power Transmission Connector (4mm) Male

$18.00

OP-87342 Male 《L》 φ4.0mm L=18mm   OP-87344 Male 《S》 φ4.0mm L=14mm   We focused on dimensional accracy to minimize the cpntact resistance with gold plating. As a result a large current is efficientry transmitted. The female...

Choose Options

Acuvance Black RX wires (50mm, 100mm, 200mm) — Acuvance

Acuvance Black RX wires (50mm, 100mm, 200mm)

$23.00

OP-15035 50mm OP-15036 100mm OP-15037 200mm   It is a black version of RX wires for XARVIS and AIRIA. It can also be used as a data communication cable between XARVIS and TAO II. Black RX wires (50 mm, 100 mm, 200 mm)

Choose Options

Acuvance Cable Holder (for 14 Guage) [OP-15007] — Acuvance

Acuvance Cable Holder (for 14 Guage) [OP-15007]

$20.00

Cable holder   OP-15007（for 14 Guage)     It is a cable holder made of aluminum to organize motor / battery cable in parallel beautifully.   It does not use a tool at all and can easily fix it by sliding the top and bottom...

Sold Out

Acuvance Power supply Extension cable For FAN — Acuvance

Acuvance Power supply Extension cable For FAN

$18.00

It is an extension cable for power supply to our FAN (including FLEDGE with Cooling fan) Use best length extension cable when change the location of FLEDGE. ※200mm extension cable comes with a FLEDGE (With fan)...

Choose Options

Acuvance Power Transmission Connector for Motor 3.5mm Male — Acuvance

Acuvance Power Transmission Connector for Motor 3.5mm Male

$15.00

The female connector is made a protruding structure for easy soldering with the motor terminal. As a result, the total length of the male connector is 10 mm.   【Details】 Main body3pcs      

Sold Out

CNC Metal wire clamp (Applicable for 14~16AWG wire) LIGHT BLUE — CS model

CNC Metal wire clamp (Applicable for 14~16AWG wire) LIGHT BLUE

$10.00

CNC Metal wire clamp (Applicable for 14~16AWG wire) BLUE HY00317B

Sold Out

EcoPower 30x30x10mm High Speed Lightweight HV Cooling Fan (21,000RPM) — ECO Power

EcoPower 30x30x10mm High Speed Lightweight HV Cooling Fan (21,000RPM)

$12.90

The EcoPower 30x30x10mm High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check.  NOTE: This fan should be installed at least 5mm away from the motor to allow sufficient air flow and prevent magnet...

Add to Cart

Flysky FS-CVT01 Voltage Collection Module — FlySky

Flysky FS-CVT01 Voltage Collection Module

$18.00

Adaptation receiver: iA6B (directly), iA10 (need to use conversion line, within the module package contains C header)Suitable models: car / boat / aircraftAcquisition voltage range: -100 ~ 100V DCAccuracy: 0.1V DCInput Power: 9mA (TYPE)Number of series:...

Add to Cart

Heatsink Bullet Plug Grips w/ 4mm Plugs — Hobby Station

Heatsink Bullet Plug Grips w/ 4mm Plugs

$15.90

4mm bullet plugs with CNC heatsink grip to make them easier to unplug

Add to Cart

Heatsink Bullet Plug Grips w/ 5mm Plugs — Hobby Station

Heatsink Bullet Plug Grips w/ 5mm Plugs

$15.90

5mm bullet plugs with CNC heatsink grip to make them easier to unplug

Add to Cart

Heatsink Bullet Plug Grips w/ 8mm Plugs — Hobby Station

Heatsink Bullet Plug Grips w/ 8mm Plugs

$16.90

8mm bullet plugs with CNC heatsink grip to make them easier to unplug

Add to Cart

Heatsink Bullet Plug Grips w/ Dual Size 4mm and 5mm Plugs — Hobby Station

Heatsink Bullet Plug Grips w/ Dual Size 4mm and 5mm Plugs

$15.90

Dual size 4mm and 5mm bullet plugs with CNC heatsink grip to make them easier to unplug

Add to Cart

Hobbystation - Square Police Car Light for 1:10/1:8 RC Car — Hobby Station

Hobbystation - Square Police Car Light for 1:10/1:8 RC Car

$24.90

Square Police Car Light for 1:10/1:8 RC Car

Sold Out

Hobbywing Capacitor for ESC 20V — Hobby Station

Hobbywing Capacitor for ESC 20V

$10.00

Hobbywing  Capacitor for ESC 20V

Add to Cart

Hobbywing P3010-JR3P 30x30x10mm Cooling Fan 30860109 — HobbyWing

Hobbywing P3010-JR3P 30x30x10mm Cooling Fan 30860109

$15.90

Hobbywing  P3010-JR3P 30x30x10mm Cooling Fan 30860109 Cyclone Fan 6v / 19000RPM / 0.3A

Add to Cart

Hobbywing 30607000 UBEC-5A-V2-Air — HobbyWing

Hobbywing 30607000 UBEC-5A-V2-Air

$25.00

Overview The UBEC uses an efficient DC-DC regulator chip with a conversion efficiency of more than 90%. UBEC output voltage is adjustable in three stages (5.0/6.0/7.4 V) with a continuous current of 5A and a maximum of 15A. The voltage specifications...

Add to Cart

Hobbywing 30840004 Capacitor Module-Non Polarity-Standard Size:19x12x8 — HobbyWing

Hobbywing 30840004 Capacitor Module-Non Polarity-Standard Size:19x12x8

$25.50

    Stock version for use with Hobbywing Xerun G2 ESC. This condenser version is protected against polarity reversal Non Polarity Capacitor Module for the Xerun XR10 Pro G2 ESC. Unbelievably low impedance and the low heat emission are...

Add to Cart

Hobbywing AXE Extended Wire Set 300mm — HobbyWing

Hobbywing AXE Extended Wire Set 300mm

$27.00

Accessory for AXE System for Rock Crawler (COMBO)    Extended Wire Sets  P/N 3085030030850301 Specifcations120MM300MM    

Add to Cart

Hobbywing CAPACITORS MODULE F — HobbyWing

Hobbywing CAPACITORS MODULE F

$9.00

Capacitor for XR10 STOCK SPEC / XR10 JUSTOCK / QUICRUN-10BL60-SENSORED speed controls.16V/470uF*1Pcs

Add to Cart

Hobbywing Cooling Fan 3510 MP — HobbyWing

Hobbywing Cooling Fan 3510 MP

$9.90

Hobbywing ESC Fan Compatible with: - EZRUN MAX 6 ESC - QUICRUN-WP-8BL150

Add to Cart

Hobbywing ESC Switch (Waterproof) 30850004 — HobbyWing

Hobbywing ESC Switch (Waterproof) 30850004

$11.00

Hobbywing ESC Switch (Waterproof)  

Add to Cart

Hobbywing Frameless Cyclone Cooling Fan for XR8 Pro — HobbyWing

Hobbywing Frameless Cyclone Cooling Fan for XR8 Pro

$15.00

Hobbywing Frameless Cyclone Cooling Fan for XR8 Pro

Add to Cart

Hobbywing Standard-CAPACITORS MODULE-D 86030030 — HobbyWing

Hobbywing Standard-CAPACITORS MODULE-D 86030030

$9.50

This is a replacement Hobbywing Xerun Super Capacitor Module, intended for use with the Xerun series ESC's.  Features: Super low impedance. Low temperature in working state. Reduces the RF interference to make the RC model more...

Add to Cart

Hobbywing UBEC-3A-6S [86010010] — HobbyWing

Hobbywing UBEC-3A-6S [86010010]

$16.00

The 3A-UBEC is a switch-mode DC-DC regulator supplied with a 2-6 cells lithium battery pack (or 5-18 cells NiMH /NiCd battery ), it outputs a consistent safe voltage for your receiver, gyro and servos. It is very suitable for RC helicopter...

Add to Cart

Hobbywing Capacitor for ESC 16V — Hobby Station

Hobbywing Capacitor for ESC 16V

$8.00

Hobbywing  Capacitor for ESC 16V

Add to Cart

Hobbywing Capacitor for ESC 560 20V — Hobby Station

Hobbywing Capacitor for ESC 560 20V

$8.00

Hobbywing  Capacitor for ESC 20V

Sold Out

JHE20B QUAD FINDER LED BUZZER BEACON W/ INTERNAL BATTERY — PyroDrone

JHE20B QUAD FINDER LED BUZZER BEACON W/ INTERNAL BATTERY

$19.50

Another option for long range guys to help recover lost quads!   The buzzer has two modes of operation: 1. It is compatible with the functions of the traditional active buzzer and synchronized with the flight control. 2. When the flight control...

Sold Out

Jumper RC Large Zipper Case (Fits T16, T18 or similar Transmitters) — JumperRC

Jumper RC Large Zipper Case (Fits T16, T18 or similar Transmitters)

$29.00

Keep your transmitter safe with this sturdy case from Jumper RC. Fits T16, T18, and other similar size transmitters.

Sold Out

KDS and JST switch harness — KDS

KDS and JST switch harness

$10.00

Product Description Futabe and JST switch harness HX-MO-03 Specifications: End A: JR M, End B: JST FM, Wire: Parallel PVC 60/0.08 OD: 1.4mm, use vehicles & Remote control Toys and RC. Model. High quality and competitive price. 1. The wire...

Sold Out

KDS Extension with switch HX-MO-02 — KDS

KDS Extension with switch HX-MO-02

$20.00

KDS Extension with switch HX-MO-02

Add to Cart

Klinik RC Universal 1/8 Switch Eliminator Set — Klinik RC

Klinik RC Universal 1/8 Switch Eliminator Set

$24.90

The switch eliminators increase reliability to your 1/8 buggy by replacing problematic switches with a robust connector. For years switches have have been to blame for countless DNF's and various communication problems. Now those problems can be a thing...

Sold Out

Matek - Micro BEC 6-30V to 5V/9V-ADJ (3 pcs) — Matek

Matek - Micro BEC 6-30V to 5V/9V-ADJ (3 pcs)

$18.00

High Efficiency Synchronous Step-down regulator Wide 6V to 30V Operating Input Range Continuous load current: 1.5 Amps (Max.2.5A 5s/minute) VOut 5V or 9V Adj. Default is 5V. VOut Load Regulation: 2% Standby current: <5mA Maximum Duty Cycle: 95% OCP...

Sold Out

Matek - Micro BEC 6-60V to 5V/9V/12V-ADJ — Matek

Matek - Micro BEC 6-60V to 5V/9V/12V-ADJ

$15.00

Wide 6V to 60V Operating Input Range Start-up Voltage >=6.7V VOut 5V, 9V or 12V Adj. Default is 5V. Maximum Duty Cycle: 100%,   when input voltage< setting value,  Regulator output voltage = Input voltage Continuous load...

Sold Out

Matek Switchable Circle LED — Matek

Matek Switchable Circle LED

$10.00

Matek switchable circle LED for distinguishing between racers.   Supported voltage of 14-16V Colours can be changed via dipswitches in centre of LED.

Add to Cart

MyLaps Transponder Holder — MYLAPS

MyLaps Transponder Holder

$12.70

This is an MYLAPS Personal RC4 Hybrid Transponder Holder, and is intended for use with the MYLAPS RC4 transponder. This holder allows you to easily use your RC4 transponder in multiple cars. Simply remove the RC4 transponder from the holder in one...

Add to Cart

OMG Aluminium Frame Cooling Fan for ESC 25x25x10mm — OMG

OMG Aluminium Frame Cooling Fan for ESC 25x25x10mm

$25.00

OMG Aluminium Frame Cooling Fan for ESC 25x25x10mm 8.5V/32000rpm

Add to Cart

OMG Aluminium Frame Cooling Fan for ESC 25x25x10mm - RED — OMG

OMG Aluminium Frame Cooling Fan for ESC 25x25x10mm - RED

$25.00

OMG Aluminium Frame Cooling Fan for ESC 25x25x10mm - RED 8.5V/32000rpm

Add to Cart

OMG Aluminium Frame Cooling Fan for ESC 30x30x10mm — OMG

OMG Aluminium Frame Cooling Fan for ESC 30x30x10mm

$27.00

OMG Aluminium Frame Cooling Fan for ESC 30x30x10mm 8.5V/28000rpm

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top