SC6 Series (SC6, SC6.1, SC6.2, SC6.4)

Replacement and option parts for the Team Associated SC6 series of 1/10 offroad Short Course Trucks. Please double check the part number in your manual to confirm compatibility. If in doubt don't hesitate to contact us for advice.

(D) Team Associated 12mm Big Bore Shock Piston Set — Team Associated

(D) Team Associated 12mm Big Bore Shock Piston Set

$6.80

This is a replacement Team Associated 12mm Big Bore Shock Piston Set, and is intended for use with Team Associated 1/10 scale vehicles equipped with the optional Team Associated 12mm Big Bore Shock Kits. This set includes four pistons of each of the...

Add to Cart

(D) Team Associated 5x8mm Ball Bearing (2) — Team Associated

(D) Team Associated 5x8mm Ball Bearing (2)

$15.20

This is a pack of two replacement Team Associated 5x8mm Ball Bearings.    This part fits the following vehicles: RC10B74 RC10B6.1 RC10B6.1D RC10B6.1DL RC10B6.1 Factory Lite RC10T6.1

Add to Cart

(D) Team Associated B6 Steering Block Arms — Team Associated

(D) Team Associated B6 Steering Block Arms

$15.20

Team Associated B6 Steering Block Arms. These are the replacement steering block arms for the RC10 B6 and B6D buggies. Package includes left and right side arms.

Add to Cart

(D) Team Associated B6D Standup "4 Gear" Motor Plate — Team Associated

(D) Team Associated B6D Standup "4 Gear" Motor Plate

$27.00

Team Associated B6D Standup "4 Gear" Motor Plate. This is the optional standup 4 gear motor plate for the RC10 B6D.  

Add to Cart

(D) Team Associated T6.1/SC6.1 Front Suspension Arms (Hard) — Team Associated

(D) Team Associated T6.1/SC6.1 Front Suspension Arms (Hard)

$14.40

These front hard arms were designed for improved suspension stiffness to facilitate consistency on high-traction surfaces. This allows for better isolation of the suspension and more precise shock tuning.  

Add to Cart

(D)Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.7mm) — Team Associated

(D)Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.7mm)

$24.80

Team Associated Factory Team Thin 12mm Big Bore Flat Shock Pistons are cut to make them thinner than a standard piston and measure approximately 1.75mm thick. The shocks feature two 1.7mm holes.    These thinner shock pistons give you less...

Add to Cart

Team Associated 10mm Aluminum Shock Bushings (Blue) — Team Associated

Team Associated 10mm Aluminum Shock Bushings (Blue)

$19.90

Team Associated 10mm Aluminum Shock Bushings. These are the replacement shock bushings. Package includes four aluminum shock bushings.  

Add to Cart

Team Associated 10mm Factory Team Heavy Duty Titanium Ball Stud Set (2) — Team Associated

Team Associated 10mm Factory Team Heavy Duty Titanium Ball Stud Set (2)

$29.80

Team Associated 10mm Factory Team Heavy Duty Titanium Ball Stud Set. This optional ball stud can be used in place of TA10-91049. In the B6 and B6D model this ball stud is used in the rear axle carrier, front inner camber link mount, c-hub steering rack,...

Add to Cart

Team Associated 10x15x4mm Factory Team Bearing (4) — Team Associated

Team Associated 10x15x4mm Factory Team Bearing (4)

$17.90

This is a pack of four Team Associated 10x15x4mm Factory Team Bearings.  

Add to Cart

Team Associated 12mm Aluminum Shock Bushings (Blue) — Team Associated

Team Associated 12mm Aluminum Shock Bushings (Blue)

$19.90

Team Associated 12mm Aluminum Shock Bushings. These are the replacement 12mm shock bushings. Package includes four aluminum shock bushings.  

Add to Cart

Team Associated 12mm Big Bore Threaded Collar (Blue) (2) — Team Associated

Team Associated 12mm Big Bore Threaded Collar (Blue) (2)

$16.60

This is a pack of two replacement Team Associated Threaded Collars, and are intended for use with the Team Associated line of 1/10 scale vehicles equipped with the optional 12mm Big Bore Shock Set. This package also includes two o-rings.  

Add to Cart

Team Associated 12mm Big Bore V2 Machined Shock Spacers — Team Associated

Team Associated 12mm Big Bore V2 Machined Shock Spacers

$18.80

Team Associated 12mm Big Bore V2 Machined Shock Spacers. These are the replacement shock shaft guides for the RC10 B6 and B6D buggies. Package includes all the shock shaft guides and seal cartridge spacers needed for four shocks.  

Add to Cart

Team Associated 12mm Factory Team V2 Flat Shock Piston (2x1.7mm) (4) — Team Associated

Team Associated 12mm Factory Team V2 Flat Shock Piston (2x1.7mm) (4)

$29.80

This is a pack of four optional Team Associated Factory Team V2 Flat Mount Shock Piston. These flat pistons feature two 1.7mm holes and are for use with 12mm shocks.  

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Blue/3.90lbs) (44mm long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Blue/3.90lbs) (44mm long)

$12.50

This is a pack of 12mm Big Bore Team Associated Front Shock Springs, rated at 3.90lbs. These springs are identified as Blue for easy identification, and are intended for use on the front of the B6.1 and B6.1D.

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Blue/4.80lbs) (54mm Long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Blue/4.80lbs) (54mm Long)

$12.50

This is a pack of two Team Associated 12mm Front Shock Springs. These springs are designed for use with 12mm shocks and are 54mm long, making them ideal for use on the front shocks of short course and stadium trucks.    These springs are...

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Gray/3.60lbs) (44mm long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Gray/3.60lbs) (44mm long)

$12.50

This is a pack of 12mm Big Bore Team Associated Front Shock Springs, rated at 3.60lbs. These springs are identified as Gray for easy identification, and are intended for use on the front of the B6.1 and B6.1D.  

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Gray/4.45lbs) (54mm Long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Gray/4.45lbs) (54mm Long)

$12.50

This is a pack of two Team Associated 12mm Front Shock Springs. These springs are designed for use with 12mm shocks and are 54mm long, making them ideal for use on the front shocks of short course and stadium trucks. These springs are rated at 4.45lbs...

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Green/3.10lbs) (44mm long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Green/3.10lbs) (44mm long)

$12.50

This is a pack of two optional Team Associated 12mm Front Shock Springs. These springs are rated 3.10lbs and are colored green for easy identification. These springs are 44mm long.   

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Orange/5.10lbs) (44mm Long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Orange/5.10lbs) (44mm Long)

$12.50

This is a pack of two Team Associated 12mm Front Shock Springs. These front shock springs are 44mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Red/4.60lbs) (44mm Long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Red/4.60lbs) (44mm Long)

$12.50

This is a pack of two Team Associated 12mm Front Shock Springs. These front shock springs are 44mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.

Add to Cart

Team Associated 12mm Front Shock Spring (2) (White/3.40lbs) (44mm Long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (White/3.40lbs) (44mm Long)

$12.50

This is a pack of two Team Associated 12mm Front Shock Springs. These front shock springs are 44mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.  

Add to Cart

Team Associated 12mm Front Shock Spring (2) (White/4.10lbs) (54mm Long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (White/4.10lbs) (54mm Long)

$12.50

This is a pack of two Team Associated 12mm Front Shock Springs. These springs are designed for use with 12mm shocks and are 54mm long, making them ideal for use on the front shocks of short course and stadium trucks.    These springs are...

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Yellow/4.30lbs) (44mm Long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Yellow/4.30lbs) (44mm Long)

$12.50

This is a pack of two Team Associated 12mm Front Shock Springs. These front shock springs are 44mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.   

Add to Cart

Team Associated 12mm Front Shock Spring (Green/3.75lbs) (2) (54mm Long) — Team Associated

Team Associated 12mm Front Shock Spring (Green/3.75lbs) (2) (54mm Long)

$12.50

This is an optional Team Associated 12mm Front Shock Spring Set. These springs are designed for use with 12mm shocks and are 54mm long, making them ideal for use on the front shocks of short course and stadium trucks.    These springs are...

Add to Cart

Team Associated 12mm FT V2 Flat Mount Shock Piston (4) (2x1.5mm) — Team Associated

Team Associated 12mm FT V2 Flat Mount Shock Piston (4) (2x1.5mm)

$29.80

This is a pack of four Team Associated Factory Team 12mm FT V2 Flat Mount Shock Pistons. These pistons features two 1.5mm holes.   

Add to Cart

Team Associated 12mm Hex Method Wheels (Black) — Team Associated

Team Associated 12mm Hex Method Wheels (Black)

$13.90

This is a pack of two replacement Team Associated Black Method Wheels with a 12mm hex.

Add to Cart

Team Associated 12mm Rear Shock Spring (2) (Blue/2.20lbs) (61mm Long) — Team Associated

Team Associated 12mm Rear Shock Spring (2) (Blue/2.20lbs) (61mm Long)

$13.90

This is a pack of two Team Associated 12mm Rear Shock Springs. These rear shock springs are 61mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.

Add to Cart

Team Associated 12mm Rear Shock Spring (2) (Gray/2.0lbs) (61mm Long) — Team Associated

Team Associated 12mm Rear Shock Spring (2) (Gray/2.0lbs) (61mm Long)

$13.90

This is a pack of 12mm Big Bore Team Associated Rear Shock Springs, rated at 2.0lbs. These springs are identified as Gray for easy identification, and are intended for use on the rear of the B6.1 and B6.1D.  

Sold Out

Team Associated 12mm Rear Shock Spring (2) (Gray/2.60lbs) (72mm Long) — Team Associated

Team Associated 12mm Rear Shock Spring (2) (Gray/2.60lbs) (72mm Long)

$13.90

This is a pack of two Team Associated 12mm Rear Shock Springs. These springs are designed for use with 12mm shocks and are 72mm long, making them ideal for use on the rear shocks of short course and stadium trucks. These springs are rated at 2.60lbs...

Add to Cart

Team Associated 12mm Rear Shock Spring (2) (Green/1.80lbs) (61mm Long) — Team Associated

Team Associated 12mm Rear Shock Spring (2) (Green/1.80lbs) (61mm Long)

$13.90

This is a pack of two Team Associated 12mm Rear Shock Springs. These rear shock springs are 61mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.

Add to Cart

Team Associated 12mm Rear Shock Spring (2) (Green/2.20lbs) (72mm Long) — Team Associated

Team Associated 12mm Rear Shock Spring (2) (Green/2.20lbs) (72mm Long)

$13.90

This is a pack of two Team Associated 12mm Rear Shock Springs. These springs are designed for use with 12mm shocks and are 72mm long, making them ideal for use on the rear shocks of short course and stadium trucks. These springs are rated at 2.20lbs...

Add to Cart

Team Associated 12mm Rear Shock Spring (2) (White/1.90lbs) (61mm Long) — Team Associated

Team Associated 12mm Rear Shock Spring (2) (White/1.90lbs) (61mm Long)

$13.90

This is a pack of two Team Associated 12mm Rear Shock Springs. These rear shock springs are 61mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.   

Add to Cart

Team Associated 12mm Rear Shock Spring (2) (White/2.40lbs) (72mm Long) — Team Associated

Team Associated 12mm Rear Shock Spring (2) (White/2.40lbs) (72mm Long)

$13.90

This is a pack of two Team Associated 12mm Rear Shock Springs. These springs are designed for use with 12mm shocks and are 72mm long, making them ideal for use on the rear shocks of short course and stadium trucks. These springs are rated at 2.40lbs...

Add to Cart

Team Associated 12mm Rear Shock Spring (2) (Yellow/2.30lbs) (61mm Long) — Team Associated

Team Associated 12mm Rear Shock Spring (2) (Yellow/2.30lbs) (61mm Long)

$13.90

This is a pack of 12mm Big Bore Team Associated Rear Shock Springs, rated at 2.3lbs. These springs are identified as Yellow for easy identification, and are intended for use on the rear of the B6.1 and B6.1D.

Add to Cart

Team Associated 12mm Shock Collar & Seal Retainer Set (Black) — Team Associated

Team Associated 12mm Shock Collar & Seal Retainer Set (Black)

$26.50

Team Associated 12mm Shock Collar & Seal Retainer Set. Package includes optional shock spring pre-load collars, lower shock caps and o-rings. These are compatible with the B6.1, B6.2, B6.3 SC6.1, SC6.2, T6.1 and T6.2 models.   

Add to Cart

Team Associated 12mm V2 Big Bore Shock Rebuild Kit — Team Associated

Team Associated 12mm V2 Big Bore Shock Rebuild Kit

$19.90

This is a replacement Team Associated 12mm V2 Shock Rebuild Kit. This kit is compatible with the B44.3, B5, B5M and T5M models.   Contents: (12) V2 Shock Hat Bushing (8) Red O-Ring (4) Shock Cap O-Ring  

Sold Out

Team Associated 12mm V2 Shock Cap Bleeder Screw & Gasket Set — Team Associated

Team Associated 12mm V2 Shock Cap Bleeder Screw & Gasket Set

$5.50

This is a replacement Team Associated 12mm V2 Shock Cap Bleeder Screw & Gasket Set. Package includes two screws and two gaskets.

Add to Cart

Team Associated 12mm V2 X-Ring Rebuild Kit — Team Associated

Team Associated 12mm V2 X-Ring Rebuild Kit

$29.80

This is an optional Team Associated 12mm V2 X-Ring Rebuild Kit. Package includes eight x-ring type shock seals, and all the necessary shaft guides for four shocks.   

Add to Cart

Team Associated 13mm Front Shock Spring (Blue/4.80lbs) (54mm) — Team Associated

Team Associated 13mm Front Shock Spring (Blue/4.80lbs) (54mm)

$17.50

Team Associated 13mm Front Shock Springs. These optional springs are intended for the Team Associated T6.2 and the SC6.2 when upgrading to 13mm shocks. The larger 13mm-bore piston allows you to run lighter oils to get the low-speed feeling of a soft...

Add to Cart

Team Associated 13mm Front Shock Spring (Grey/4.60lbs) (54mm) — Team Associated

Team Associated 13mm Front Shock Spring (Grey/4.60lbs) (54mm)

$17.50

Team Associated 13mm Front Shock Springs. These optional springs are intended for the Team Associated T6.2 and the SC6.2 when upgrading to 13mm shocks. The larger 13mm-bore piston allows you to run lighter oils to get the low-speed feeling of a soft...

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top