Team Associated RC8B4 Team 1/8 4WD Off-Road Nitro Buggy Kit (OPEN BOX SPECIAL)

This kit has been used to provide full spare parts support at local racing events, a few parts have been taken and then replaced, all parts are included in the kit and brand new, grab yourself a bargain!

The Team Associated RC8B4 Team 1/8 4WD Off-Road Nitro Buggy Kit is designed to push the limits of off road racing. This buggy has been given a huge overhaul and features updated gearboxes, front upper and lower arm design, rear arm design, chassis braces, rear hub design and fuel tank design for peak performance. The front-end geometry has also received updates allowing for increased stability and more consistent steering through the entire steering throw. All of these features come together for a buggy that is ready to dominate the track.

Front and Rear Gearbox

The front and rear gearboxes have received crucial updates. The front gearbox features a 3.5° incline allowing for a straightened driveshaft, increasing drivetrain efficiency. The rear gearbox uses a 0° pinion angle, maintaining this straightened driveshaft system. Both gearboxes use oversized bearing for longer bearing lifespan. 

Front Suspension Arms

The front upper and lower suspension arms have been designed to accommodate a wide range of flex and stiffness options. Optional inserts have been made to provide extreme fine tuning and will work with the upper or lower arm. The lower arm features a one-piece anti-roll bar link mounts that are in-line with the anti-roll bar for simplified assembly and operation.

Rear Suspension Arms

The rear arms have been designed for optimum flex and stiffness with no inserts. However, optional inserts may be used for fine tuning. The rear arms also feature a one-piece anti-roll bar link is mounted in-line with the anti-roll bar with a BHCS instead of a shock pin for simplified assembly.

NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.

Features:

• Updated front and rear suspension arms
• Updated front and rear gearbox housings
• Rear wing mount has adjustable wing angle shims, significant strength improvements, an aerodynamic shape, and extra clearance for shock position adjustment
• Rear wing has more vertical fins for increased straight-line stability, a taller rear wickerbill height for increased downforce, increased strength in various areas to reduce bending fatigue, and dimples on the backside as a template for cutout holes
• Rear chassis brace has several design features and flex options
• +1mm offset rear hub features a symmetrical left and right common design with axle height inserts for adjustable roll center tuning
• Updated fuel tank with many updated features

Specifications:

Scale Size: 1:8 Scale

Terrain: Off-Road

Body Style: Buggy

Drive: 4WD

Length: 486mm (19.13in)

Width: 304.5mm (11.99in)

Wheelbase: varies

Weight: varies

Power Source: Nitro Fuel

Assembly Level: Kit

Includes:

(1) RC8B4 Off-Road Nitro Buggy Kit

Needed to Complete:

.21 class rear exhaust engine

Exhaust system: muffler and header joining pack, or muffler spring

2 or 3 channel radio/transmitter set with switch - FM/PCM/2.4GHz recommended

4.8-7.4v receiver battery

Flat style NiMH, OR Flat style LiPo receiver battery 

Model car fuel (20-30% nitro recommended)

Fuel bottle 

Glow igniter 

Starter box

1:8 scale buggy tires & wheels

CA (cyanoacrylate) glue

Polycarbonate-specific spray paint or polycarbonate-specific bottled paint and airbrush

Thread-locking compound 

Steering servo

Throttle servo

Silicone Shock & Diff Fluid

Tools