Team Associated Parts

1/8 Scale Parts

1/10 Scale Parts

1/14 Scale Parts

1/27 and 1/28 Scale Parts

Bearings

Gears

Hardware

After Market Parts for Team Associated

Oil / Grease / Glue

Tools

Merchandise

(D)Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.7mm) — Team Associated

(D)Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.7mm)

$24.80

Team Associated Factory Team Thin 12mm Big Bore Flat Shock Pistons are cut to make them thinner than a standard piston and measure approximately 1.75mm thick. The shocks feature two 1.7mm holes.    These thinner shock pistons give you less...

Add to Cart

1UP Racing Carbon Fiber 1/8 Offroad Body Washers (4) — 1UP Racing

1UP Racing Carbon Fiber 1/8 Offroad Body Washers (4)

$16.80

This is a pack of optional 1UP Racing Carbon Fiber Body Washers for 1/8 scale off-road applications. Increase the lifespan of your body and do away with annoying scratches and scuffs from the body mounts with these 3M extreme adhesive backed Carbon Fiber...

Add to Cart

Element RC Curved Bill Snapback Hat (Black) (One Size Fits Most) — Team Associated

Element RC Curved Bill Snapback Hat (Black) (One Size Fits Most)

$20.30

This is an Element RC Curved Bill Snapback Hat. This black cap features an adjustable snap strap, meaning one-size-fits-all for any fan, with the "Element RC" logo stitched across the front of the cap in silver and green thread.

Add to Cart

Element RC Enduro Receiver Box Seals — Element RC

Element RC Enduro Receiver Box Seals

$14.90

This is a replacement set of Element RC Receiver Box Seals, intended for use with the Element Enduro Sendero.   Includes: (1) Receiver Box Grommet (1) Receiver Box Grommet Plug (1) Receiver Box Gasket

Add to Cart

Element RC Flatbill Snapback Hat (Black) (One Size Fits Most) — Team Associated

Element RC Flatbill Snapback Hat (Black) (One Size Fits Most)

$20.30

This is an Element RC Flatbill Snapback Hat. This black cap features an adjustable snap strap, meaning one-size-fits-all for any fan, with the "Element RC" logo stitched across the front of the cap in silver and green thread.

Add to Cart

Exotek B6.4 Carbon Fiber Lipo Tabs & Cup Set — Exotek

Exotek B6.4 Carbon Fiber Lipo Tabs & Cup Set

$47.90

Exotek B6.4 Carbon Fiber Lipo Tabs and Cup Set. This adjustable battery tab set gives you the ability to quickly move your battery forward or back in the chassis as well as securely hold traditional shorty or LCG shorty LiPo battery packs. Constructed...

Add to Cart

Exotek DR10 Aluminum HD "D" Rear Arm Mount (Blue) — Exotek

Exotek DR10 Aluminum HD "D" Rear Arm Mount (Blue)

$31.80 $21.90

The Exotek DR10 Aluminum HD Rear Arm Mount "D" is a heavy duty 7075 alloy rear suspension mount option for the Team Associated DR10 and DB10 models. This upgrade ensures precise suspension setting race after race, even after hard impacts, so that you...

Add to Cart

Exotek DR10 Aluminum HD Idler Gear V2 — Exotek

Exotek DR10 Aluminum HD Idler Gear V2

$21.90 $14.90

This is an optional Exotek DR10 Aluminum HD Idler Gear V2, a hard anodized idler gear machined from quality 7075 aluminum alloy, designed to be stronger and more dependable than the stock supplied part in the DR10 Electric Drag Car Race Kit. The V2 model...

Add to Cart

Exotek DR10 Carbon ESC Plate — Exotek

Exotek DR10 Carbon ESC Plate

$29.00 $19.90

This is an optional Exotek DR10 Carbon ESC Plate, suited for use with the Team Associated DR10 Electric Drag Car Race Kit. This lightweight 2mm carbon fiber esc tray allows easier mounting of larger esc's and stock esc's in a centrally balanced location...

Sold Out

Exotek DR10 HD "C" Rear Arm Mount (Blue) — Exotek

Exotek DR10 HD "C" Rear Arm Mount (Blue)

$48.90 $33.90

The Exotek DR10 HD "C" Rear Arm Mount is a heavy duty adjustable rear toe suspension mount system for the Team Associated DR10, SR10 and similar models. This drop in fit 'C' mount fits the stock chassis with no modification and allows you to adjust rear...

Add to Cart

Hobby Station - Chrome Steel ABEC 5 Bearing Kit - Team Associated RC10 Classic — Hobby Station

Hobby Station - Chrome Steel ABEC 5 Bearing Kit - Team Associated RC10 Classic

$30.00

Precision chrome steel ABEC 5 bearings with double rubber shields. Bearings are greased to provide good longevity and low maintenance. Kit includes the following bearings: 3/16x5/16x1/8 Flanged (9pcs) 1/4x3/8x1/8 Flanged (5pcs) 3/16x5/16x1/8 (2pcs)

Sold Out

Hobby Station - Chrome Steel ABEC 5 Bearing Kit - Team Associated RC10 Worlds Car — Hobby Station

Hobby Station - Chrome Steel ABEC 5 Bearing Kit - Team Associated RC10 Worlds Car

$25.00

Precision chrome steel ABEC 5 bearings with double rubber shields. Bearings are greased to provide good longevity and low maintenance. Kit includes the following bearings: 3/16x3/8x1/8 (12pcs) 1/4x3/8x1/8 Flanged(4pcs) 3/8x5/8x5x32 (2pcs) 5/32x5/16x1/8...

Add to Cart

Hobby Station - Chrome Steel ABEC 5 Bearing Kit - Team Associated RC10T Classic — Hobby Station

Hobby Station - Chrome Steel ABEC 5 Bearing Kit - Team Associated RC10T Classic

$21.00

Precision chrome steel ABEC 5 bearings with double rubber shields. Bearings are greased to provide good longevity and low maintenance. Kit includes the following bearings: 5/32x5/16x1/8 (2pcs) 3/16x5/16x1/8 (1pcs) 3/16x3/8x1/8 (8pcs) 1/4x3/8x1/8...

Add to Cart

Hobby Station - Chrome Steel Bearing Kit - Team Associated RC10 Classic — Hobby Station

Hobby Station - Chrome Steel Bearing Kit - Team Associated RC10 Classic

$49.00

ABEC-5 Precision Chrome Steel Ball bearings with double rubber shields and grease to provide long lasting and low maintenance bearings.   Kit includes the following bearings: 3/16 x 5/16 x 1/8 Flanged (9pcs) 3/16 x 5/16 x 1/8 (2pcs) 1/4 x 3/8 x...

Sold Out

JConcepts - Carpet | Turf | Dirt, 7" Wing – Pre-Trimmed — JConcepts

JConcepts - Carpet | Turf | Dirt, 7" Wing – Pre-Trimmed

$22.00

A new High-Clearance Wing as pre-trimmed has been developed and manufactured by JConcepts Inc. The 7” wide HCW incorporates a short-chord design for quick rotation and a flat-base which provides more tire clearance. As the carpet, Astroturf, and...

Sold Out

JConcepts - CARPET/ASTRO HIGH-CLEARANCE REAR WING — JConcepts

JConcepts - CARPET/ASTRO HIGH-CLEARANCE REAR WING

$22.00

A new High-Clearance Wing has been developed and manufactured by JConcepts Inc. The HCW incorporates a short-chord design for quick rotation and a flat-base which provides more tire clearance. As the carpet and Astroturf conditions become more prevalent,...

Add to Cart

JCONCEPTS - DR10 BRASS FRONT SUSPENSION BRACE — JConcepts

JCONCEPTS - DR10 BRASS FRONT SUSPENSION BRACE

$23.00

Front-end protection and weight is critical on all RC vehicles and in particular drag racing. JConcepts is once again on task with the release of the brass front suspension brace for the Team Associated DR10 line of vehicles. The all-brass machined brace...

Add to Cart

JConcepts - F2 - 1/8th Truck Body, Replacement Nosepiece — JConcepts

JConcepts - F2 - 1/8th Truck Body, Replacement Nosepiece

$17.00

DescriptionJConcepts has a replaceable front nosepiece for the F2 truck body for racers wanting to re-build or freshen up. The polycarbonate piece is identical to the F2 item included with the original body and mounts in the same manner. One piece is...

Sold Out

JConcepts - F2 BODY SPOILER FOR F2, T6.1 BODY - 2PC — JConcepts

JConcepts - F2 BODY SPOILER FOR F2, T6.1 BODY - 2PC

$22.00

Replacement spoiler for the F2 - T6.1 Finnisher body #0355 / #0355L

Add to Cart

JConcepts - F2 Truggy Body Mount Adaptor, Carbon Fiber - RC8T3.2 — JConcepts

JConcepts - F2 Truggy Body Mount Adaptor, Carbon Fiber - RC8T3.2

$37.00

JConcepts unveiled a new body during the 2021 ROAR Fuel Nationals for the 1/8th truck division. The F2 body was constructed to perform at the highest level using the latest trend of reducing surface area above the shock tower line, reducing the overall...

Add to Cart

JConcepts - Razor 1/8th Buggy | Truck Wing — JConcepts

JConcepts - Razor 1/8th Buggy | Truck Wing

$29.00

Adding to the latest trend of 1/8th off-road wing performance, JConcepts presents the Razor wing to an already successful line of Aero products. For the IFMAR Worlds, JConcepts dug in to the arsenal to produce a combination wing including elements first...

Choose Options

JConcepts - RC10 Diamond Nose Brace Tubes - Black — JConcepts

JConcepts - RC10 Diamond Nose Brace Tubes - Black

$24.00

Description The RC10 vehicles have high-end appeal with so much aluminum present on each vehicle.    A high focal point on each vehicle is the front nose brace tubes and for years drivers have detailed the tubes by polishing, anodizing and...

Sold Out

JConcepts - RC10 Diamond Wing Tubes (Black) — JConcepts

JConcepts - RC10 Diamond Wing Tubes (Black)

$25.00

JConcepts - RC10 Diamond Wing Tubes (Black) The RC10 vehicles have high-end appeal with so much aluminum present on each vehicle. An important functional point on each vehicle are the wing tubes and for years drivers have detailed the tubes by...

Sold Out

JConcepts - RC10 Finnisher Wing Buttons- 2pcs (BLUE) — JConcepts

JConcepts - RC10 Finnisher Wing Buttons- 2pcs (BLUE)

$18.00

RC10 Finnisher wing buttons- 2pc. Fits – all RC10 buggies Description Finishing off the look of the RC10 is simple with the JConcepts.    Aluminum wing buttons are a simple item which locks in the wing position on the RC10 in a more...

Sold Out

JConcepts - TRAXXAS BIG BORE SHOCK LIMITER KIT FOR SCALPEL CONVERSION — JConcepts

JConcepts - TRAXXAS BIG BORE SHOCK LIMITER KIT FOR SCALPEL CONVERSION

$9.50

The Scalpel conversion kit has been popular on and off the track.   JConcepts has released a shock limiter kit to make the off-road to on-road transition that much easier.  6 pieces of long and 4 pieces of short nylon travel limiters are...

Add to Cart

JConcepts F2I 1/8th Buggy / Truggy Wing — JConcepts

JConcepts F2I 1/8th Buggy / Truggy Wing

$29.00

Drivers routinely search for the ultimate aero package on the 1/8th off-road scene and JConcepts is directly on top of the latest trends with the release of the F2I rear wing. F2I relates to Finnisher related items morphing into a 2nd generation and this...

Choose Options

JConcepts F2I 1/8th Buggy Wing Center Divider — JConcepts

JConcepts F2I 1/8th Buggy Wing Center Divider

$16.00

Divide and conquer with the new wing divider by JConcepts. The leader in off-road wing development has arrived with another test and tune option. The center wing divider is simple, yet effective and together with wings like the F2I, can provide...

Add to Cart

JConcepts SC6.1 Carbon Fiber Drag Racing Rear Shock Tower — JConcepts

JConcepts SC6.1 Carbon Fiber Drag Racing Rear Shock Tower

$39.00

Fits – SC6.1 converted to Street Eliminator   Compatible with #2709 JConcepts wheelie bar conversion kit   Another item built to Street Eliminator specifications is the drag racing rear shock tower for the SC6.1. This tower is...

Add to Cart

Klinik RC 10.5mm Exhaust Manifold Support — Klinik RC

Klinik RC 10.5mm Exhaust Manifold Support

$20.90

Using the manifold support ensures the exhaust system will move less when going over rough parts of the track or when bottoming out after landing a jump, which results in a lot less stress on all exhaust and engine components and thus improve longevity...

Add to Cart

Klinik RC 7mm Exhaust Manifold Support — Klinik RC

Klinik RC 7mm Exhaust Manifold Support

$20.90

Using the manifold support ensures the exhaust system will move less when going over rough parts of the track or when bottoming out after landing a jump, which results in a lot less stress on all exhaust and engine components and thus improve longevity...

Add to Cart

Klinik RC Dry Air Filter Outer Pre-Filter (1) — Klinik RC

Klinik RC Dry Air Filter Outer Pre-Filter (1)

$9.00

Replacement Dry Foam Outer Pre-Filter

Sold Out

Klinik RC Exhaust Manifold Protection Ring (O.S) (1pc) — Klinik RC

Klinik RC Exhaust Manifold Protection Ring (O.S) (1pc)

$5.40

Laser cut from aluminum, these will provide a sacrificial surface between your exhaust springs and an expensive manifold. They can also stop wear in an existing damaged manifold. Fits O.S manifold/pipe Pack includes 1 protection ring

Sold Out

Klinik RC Pure Silicone Nitro Engine Carburetor Return O-ring — Klinik RC

Klinik RC Pure Silicone Nitro Engine Carburetor Return O-ring

$7.90

We have tested several different carb return mechanisms throughout the 2020 season, and this o-ring won the shootout by far. Made from heat and oil resistant 100% pure silicone. Won't mar or damage carb boots or bodies like metal springs. Much more...

Sold Out

Klinik RC Team Associated RC8 B3.2/B4 Switch Eliminator — Klinik RC

Klinik RC Team Associated RC8 B3.2/B4 Switch Eliminator

$39.00

Eliminate unreliable power switch malfunctions and DNF's with this connector style on/off switch. Plug in to turn on and unplug to turn off, simple!

Sold Out

Klinik RC Universal 1/8 Switch Eliminator Set — Klinik RC

Klinik RC Universal 1/8 Switch Eliminator Set

$24.90

The switch eliminators increase reliability to your 1/8 buggy by replacing problematic switches with a robust connector. For years switches have have been to blame for countless DNF's and various communication problems. Now those problems can be a thing...

Sold Out

MIP 3.25mm Turnbuckle Wrench (AE 1/10th Scale) #9725 — MIP

MIP 3.25mm Turnbuckle Wrench (AE 1/10th Scale) #9725

$25.40

#9725 - MIP Turnbuckle Wrench, 3.25mm, AE 1/10th Scale Package Includes: 1 x 3.25 mm Turnbuckle Wrench (AE) Tool Makeup: Angled tool head to be ergonomically more friendly when using the tool vs a straight cut. Tolerances within +/- .001" (~ 0...

Add to Cart

ProTek RC "DustBuster 2" TLR Style Air Filter Foam (12) (RC8B3/8IGHT/D817/SRX8/NB48 2.0) — ProTek RC

ProTek RC "DustBuster 2" TLR Style Air Filter Foam (12) (RC8B3/8IGHT/D817/SRX8/NB48 2.0)

$30.00

This is a pack of twelve ProTek R/C "DustBuster 2" Air Filters, intended for use with the Team Associated RC8B3, Losi/TLR 8IGHT family of vehicles, Serpent SRX8, Tekno NB48 2.0 family of vehicles and the D8 family of vehicles equipped with the optional...

Add to Cart

ProTek RC "DustBuster 2" TLR Style Pre-Oiled Air Filter (12) (RC8B3/8IGHT/D817/NB48 2.0) — ProTek RC

ProTek RC "DustBuster 2" TLR Style Pre-Oiled Air Filter (12) (RC8B3/8IGHT/D817/NB48 2.0)

$32.00

This is a pack of twelve ProTek R/C "DustBuster 2" Pre-Oiled Air Filters, intended for use with the Team Associated RC8B3, Losi/TLR 8IGHT family of vehicles, Serpent SRX8, Tekno NB48 2.0 family of vehicles and the D8 family of vehicles equipped with the...

Sold Out

ProTek RC "Glitch Buster" Receiver Voltage Stabilizer — ProTek RC

ProTek RC "Glitch Buster" Receiver Voltage Stabilizer

$8.20

The ProTek R/C Receiver Voltage Stabilizer is a small but powerful super-capacitor that stores and releases power to ensure receiver voltage is always stable. While a BEC regulates voltage to the receiver, it can't perform properly...

Sold Out

ProTek RC - Dual Offset Heavy Duty Clamping Servo Horn (Standard) (25T) — ProTek RC

ProTek RC - Dual Offset Heavy Duty Clamping Servo Horn (Standard) (25T)

$17.90

The ProTek R/C Dual Offset Heavy Duty Clamping Servo Horn features a dual offset allowing you to choose the best offset for your setup. The 4mm thick horn has a 20mm and 16mm hole spacing threaded for 3mm hardware to suit the geometry and hardware...

Sold Out

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top