Accessories

OMG Fans

Hobbystation - Adjustable Fan Mount for 42mm Motor - Black — Hobby Station

Hobbystation - Adjustable Fan Mount for 42mm Motor - Black

$14.70

Hobbystation - Adjustable Fan Mount for 42mm Motor - Black Adjustable Fan Mount to fit 42mm size motors. Perfect for 1/8 scale offroad and onroad cars

Add to Cart

ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Blue/Black) — ProTek RC

ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Blue/Black)

$26.87

The ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check. The fan features a machined aluminum case that helps to dissipate heat, allowing cooler operation of the fan motor at high voltage...

Add to Cart

Spare LED Lights for light kit — Hobby Station

Spare LED Lights for light kit

$15.65

Spare LED Lights (red, yellow, and white lights) for general light kit 5mm LED Light (White) x25mm LED Light (Red) x13mm LED Light (Orange) x13mm LED Light (White) x1  

Add to Cart

Hobbywing Frameless Cyclone Cooling Fan for XR8 Pro — HobbyWing

Hobbywing Frameless Cyclone Cooling Fan for XR8 Pro

$13.04

Hobbywing Frameless Cyclone Cooling Fan for XR8 Pro

Add to Cart

2CH Remote LED Light Switch Adaptor — Hobby Station

2CH Remote LED Light Switch Adaptor

$10.43

This adaptor allows you to switch on and off remotely for the LED Lights installed on your RC car.

Add to Cart

Hobbywing P3010-JR3P 30x30x10mm Cooling Fan 30860109 — HobbyWing

Hobbywing P3010-JR3P 30x30x10mm Cooling Fan 30860109

$13.83

Hobbywing  P3010-JR3P 30x30x10mm Cooling Fan 30860109 Cyclone Fan 6v / 19000RPM / 0.3A

Add to Cart

Hobbywing CAPACITORS MODULE F — HobbyWing

Hobbywing CAPACITORS MODULE F

$7.83

Capacitor for XR10 STOCK SPEC / XR10 JUSTOCK / QUICRUN-10BL60-SENSORED speed controls.16V/470uF*1Pcs

Add to Cart

TBS M10 GPS (Glonass) — TBS

TBS M10 GPS (Glonass)

$27.74

SPECIFICATION Chipset - ublox UBX-M10050Flash memory for saving configuration.Frequency - L1, 1575.42MHz ; L2,1561.10MHZ；L3,1602.00MHZBaud Rate - 4800bps-921600bps, default 38400bpsChannel - N/aSensitivity - (Tracking: -166dBm) | (Capture: -160dBm) |...

Add to Cart

SKYRC Toro Program Card for Airplane and Helicopter ESC SK-300033-01 — SkyRC

SKYRC Toro Program Card for Airplane and Helicopter ESC SK-300033-01

$16.52

Product Description SKYRC Toro Program Card for Airplane and Helicopter ESC SK-300033-01 Specifications: Dimension: 52.5x79.5x6.6mmWeight: 11g

Add to Cart

Hobbystation - Square Police Car Light for 1:10/1:8 RC Car — Hobby Station

Hobbystation - Square Police Car Light for 1:10/1:8 RC Car

$21.65

Square Police Car Light for 1:10/1:8 RC Car

Sold Out

KDS Extension with switch HX-MO-02 — KDS

KDS Extension with switch HX-MO-02

$17.39

KDS Extension with switch HX-MO-02

Sold Out

KDS and JST switch harness — KDS

KDS and JST switch harness

$8.70

Product Description Futabe and JST switch harness HX-MO-03 Specifications: End A: JR M, End B: JST FM, Wire: Parallel PVC 60/0.08 OD: 1.4mm, use vehicles & Remote control Toys and RC. Model. High quality and competitive price. 1. The wire...

Sold Out

Hobbywing Capacitor for ESC 560 20V — Hobby Station

Hobbywing Capacitor for ESC 560 20V

$6.96

Hobbywing  Capacitor for ESC 20V

Sold Out

Hobbywing Capacitor for ESC 16V — Hobby Station

Hobbywing Capacitor for ESC 16V

$6.96

Hobbywing  Capacitor for ESC 16V

Sold Out

Hobbywing Capacitor for ESC 20V — Hobby Station

Hobbywing Capacitor for ESC 20V

$8.70

Hobbywing  Capacitor for ESC 20V

Sold Out

Hobbywing 30607000 UBEC-5A-V2-Air — HobbyWing

Hobbywing 30607000 UBEC-5A-V2-Air

$21.74

Overview The UBEC uses an efficient DC-DC regulator chip with a conversion efficiency of more than 90%. UBEC output voltage is adjustable in three stages (5.0/6.0/7.4 V) with a continuous current of 5A and a maximum of 15A. The voltage specifications...

Add to Cart

ProTek RC "SureStart" Replacement Power Switch — ProTek RC

ProTek RC "SureStart" Replacement Power Switch

$7.74

This is a replacement ProTek R/C "SureStart" Power Switch, and is intended for use with the ProTek R/C "SureStart" 1/8 off road starter box (PTK-4500).

Add to Cart

Heatsink Bullet Plug Grips w/ 8mm Plugs — Hobby Station

Heatsink Bullet Plug Grips w/ 8mm Plugs

$14.70

8mm bullet plugs with CNC heatsink grip to make them easier to unplug

Add to Cart

Heatsink Bullet Plug Grips w/ Dual Size 4mm and 5mm Plugs — Hobby Station

Heatsink Bullet Plug Grips w/ Dual Size 4mm and 5mm Plugs

$13.83

Dual size 4mm and 5mm bullet plugs with CNC heatsink grip to make them easier to unplug

Add to Cart

Heatsink Bullet Plug Grips w/ 4mm Plugs — Hobby Station

Heatsink Bullet Plug Grips w/ 4mm Plugs

$13.83

4mm bullet plugs with CNC heatsink grip to make them easier to unplug

Add to Cart

Hobbywing ESC Switch (Waterproof) 30850004 — HobbyWing

Hobbywing ESC Switch (Waterproof) 30850004

$9.57

Hobbywing ESC Switch (Waterproof)  

Add to Cart

ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black) — ProTek RC

ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)

$26.87

The ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check. The fan features a machined aluminum case that helps to dissipate heat, allowing cooler operation of the fan motor at high voltage...

Add to Cart

T-Works - 64 Titanium Servo Screw ( 3x12mm ) 4pcs — T-Works

T-Works - 64 Titanium Servo Screw ( 3x12mm ) 4pcs

$15.13

Light weight M3 x 12mm Titanium servo screw. Locks servo in center position without needing servo washers.

Sold Out

T-Works - 64 Titanium Servo Screw ( 3x7mm ) 4pcs — T-Works

T-Works - 64 Titanium Servo Screw ( 3x7mm ) 4pcs

$12.87

Light weight M3 x 7mm Titanium servo screw. Locks servo in center position without needing servo washers.

Add to Cart

Flysky FS-CVT01 Voltage Collection Module — FlySky

Flysky FS-CVT01 Voltage Collection Module

$15.65

Adaptation receiver: iA6B (directly), iA10 (need to use conversion line, within the module package contains C header)Suitable models: car / boat / aircraftAcquisition voltage range: -100 ~ 100V DCAccuracy: 0.1V DCInput Power: 9mA (TYPE)Number of series:...

Add to Cart

Klinik RC Universal 1/8 Switch Eliminator Set — Klinik RC

Klinik RC Universal 1/8 Switch Eliminator Set

$21.65

The switch eliminators increase reliability to your 1/8 buggy by replacing problematic switches with a robust connector. For years switches have have been to blame for countless DNF's and various communication problems. Now those problems can be a thing...

Sold Out

EcoPower 30x30x10mm High Speed Lightweight HV Cooling Fan (21,000RPM) — ECO Power

EcoPower 30x30x10mm High Speed Lightweight HV Cooling Fan (21,000RPM)

$11.22

The EcoPower 30x30x10mm High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check.  NOTE: This fan should be installed at least 5mm away from the motor to allow sufficient air flow and prevent magnet...

Add to Cart

TBS SOLDER 100g DIA 0.5MM (63/37) — TBS

TBS SOLDER 100g DIA 0.5MM (63/37)

$13.83

Premium leaded solder with integrated flux to make any solder work a breeze! TBS Solder is spec'd accordingly to Chris Dunkel aka RiSCyD, our lead engineer. Easy to solder, plenty of flux to make sure it cures nice and looks professional...

Add to Cart

Matek - Micro BEC 6-60V to 5V/9V/12V-ADJ — Matek

Matek - Micro BEC 6-60V to 5V/9V/12V-ADJ

$13.04

Wide 6V to 60V Operating Input Range Start-up Voltage >=6.7V VOut 5V, 9V or 12V Adj. Default is 5V. Maximum Duty Cycle: 100%,   when input voltage< setting value,  Regulator output voltage = Input voltage Continuous load...

Sold Out

Matek - Micro BEC 6-30V to 5V/9V-ADJ (3 pcs) — Matek

Matek - Micro BEC 6-30V to 5V/9V-ADJ (3 pcs)

$15.65

High Efficiency Synchronous Step-down regulator Wide 6V to 30V Operating Input Range Continuous load current: 1.5 Amps (Max.2.5A 5s/minute) VOut 5V or 9V Adj. Default is 5V. VOut Load Regulation: 2% Standby current: <5mA Maximum Duty Cycle: 95% OCP...

Sold Out

Tarot ZYX-S GYRO Connection Cable 165mm for Futaba S.Bus S-Bus Receiver — Tarot

Tarot ZYX-S GYRO Connection Cable 165mm for Futaba S.Bus S-Bus Receiver

$4.35

Sold Out

Hobbywing 30840004 Capacitor Module-Non Polarity-Standard Size:19x12x8 — HobbyWing

Hobbywing 30840004 Capacitor Module-Non Polarity-Standard Size:19x12x8

$23.48

Stock version for use with Hobbywing Xerun G2 ESC. This condenser version is protected against polarity reversal Non Polarity Capacitor Module for the Xerun XR10 Pro G2 ESC. Unbelievably low impedance and the low heat emission are simply indispensable...

Add to Cart

ProTek RC "Glitch Buster" Receiver Voltage Stabilizer — ProTek RC

ProTek RC "Glitch Buster" Receiver Voltage Stabilizer

$8.61

The ProTek R/C Receiver Voltage Stabilizer is a small but powerful super-capacitor that stores and releases power to ensure receiver voltage is always stable. While a BEC regulates voltage to the receiver, it can't perform properly without enough...

Add to Cart

Reedy 30x30mm Carbon Fiber Fan Guard — Reedy

Reedy 30x30mm Carbon Fiber Fan Guard

$12.96

Reedy Fan Guard, 30x30mm, carbon fiber   Reedy's carbon-fiber fan guard protects 30mm ESC and motor fans from the rigors of extreme competition. Lightweight carbon fiber minimizes CG changes while providing excellent protection and maximum air...

Add to Cart

Acuvance Power supply Extension cable For FAN — Acuvance

Acuvance Power supply Extension cable For FAN

$15.65

It is an extension cable for power supply to our FAN (including FLEDGE with Cooling fan) Use best length extension cable when change the location of FLEDGE. ※200mm extension cable comes with a FLEDGE (With fan)...

Choose Options

Acuvance Black RX wires (50mm, 100mm, 200mm) — Acuvance

Acuvance Black RX wires (50mm, 100mm, 200mm)

$20.00

OP-15035 50mm OP-15036 100mm OP-15037 200mm   It is a black version of RX wires for XARVIS and AIRIA. It can also be used as a data communication cable between XARVIS and TAO II. Black RX wires (50 mm, 100 mm, 200 mm)

Choose Options

Power supply Extension cable For FAN — Acuvance

Power supply Extension cable For FAN

$13.04

This product is a cable for converting our FAN cable (including FLEDGE-equipped FAN) to RX connector and supplying power from the receiver.   ※Compared to the power supply from the cooling FAN terminal of XARVIS/XARVIS XX, the rotation speed of...

Sold Out

Hobbywing Standard-CAPACITORS MODULE-D 86030030 — HobbyWing

Hobbywing Standard-CAPACITORS MODULE-D 86030030

$8.26

This is a replacement Hobbywing Xerun Super Capacitor Module, intended for use with the Xerun series ESC's.  Features: Super low impedance. Low temperature in working state. Reduces the RF interference to make the RC model more...

Add to Cart

Hobbywing AXE Extended Wire Set 300mm — HobbyWing

Hobbywing AXE Extended Wire Set 300mm

$23.48

Accessory for AXE System for Rock Crawler (COMBO)    Extended Wire Sets  P/N 3085030030850301 Specifcations120MM300MM    

Add to Cart

Acuvance Cable Holder (for 14 Guage) [OP-15007] — Acuvance

Acuvance Cable Holder (for 14 Guage) [OP-15007]

$17.39

Cable holder   OP-15007（for 14 Guage)     It is a cable holder made of aluminum to organize motor / battery cable in parallel beautifully.   It does not use a tool at all and can easily fix it by sliding the top and bottom...

Sold Out

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top