B5 Series

Replacement and option parts for the Team Associated RC10 B5 series of 1/10 2wd offroad buggies. Please double check the part number in your manual to confirm compatibilty. If in doubt don't hesitate to contact us for advice

(D) Team Associated 12mm Big Bore Shock Piston Set — Team Associated

(D) Team Associated 12mm Big Bore Shock Piston Set

$6.80

This is a replacement Team Associated 12mm Big Bore Shock Piston Set, and is intended for use with Team Associated 1/10 scale vehicles equipped with the optional Team Associated 12mm Big Bore Shock Kits. This set includes four pistons of each of the...

Add to Cart

(D) Team Associated 12mm Front Shock Spring (Yellow/3.75lbs) — Team Associated

(D) Team Associated 12mm Front Shock Spring (Yellow/3.75lbs)

$10.80

This is an optional Team Associated 12mm Front Spring Set, and is intended for use with the Team Associated B4.1, B44.1, T4.1, SC10 and SC10GT 1/10 scale vehicles equipped with the optional Team Associated Big Bore Shock Set. Effects of Shock Spring...

Add to Cart

(D) Team Associated 5x8mm Ball Bearing (2) — Team Associated

(D) Team Associated 5x8mm Ball Bearing (2)

$15.20

This is a pack of two replacement Team Associated 5x8mm Ball Bearings.    This part fits the following vehicles: RC10B74 RC10B6.1 RC10B6.1D RC10B6.1DL RC10B6.1 Factory Lite RC10T6.1

Add to Cart

(D) Team Associated B5 Rear Arm (2) — Team Associated

(D) Team Associated B5 Rear Arm (2)

$14.60

This is a pack of two replacement Team Associated RC10B5 Rear Arms. Package includes left and right side rear arms.  

Add to Cart

(D)Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.7mm) — Team Associated

(D)Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.7mm)

$24.80

Team Associated Factory Team Thin 12mm Big Bore Flat Shock Pistons are cut to make them thinner than a standard piston and measure approximately 1.75mm thick. The shocks feature two 1.7mm holes.    These thinner shock pistons give you less...

Add to Cart

Team Associated 10mm Heavy Duty Ballstud Set (8) — Team Associated

Team Associated 10mm Heavy Duty Ballstud Set (8)

$36.90

This is a replacement Team Associated 10mm Heavy Duty Ballstud Set, and is intended for use with the Associated SC10 4x4, B5 and B5M vehicles.  

Add to Cart

Team Associated 10x15x4mm Factory Team Bearing (4) — Team Associated

Team Associated 10x15x4mm Factory Team Bearing (4)

$17.90

This is a pack of four Team Associated 10x15x4mm Factory Team Bearings.  

Add to Cart

Team Associated 12mm Big Bore Threaded Collar (Blue) (2) — Team Associated

Team Associated 12mm Big Bore Threaded Collar (Blue) (2)

$16.60

This is a pack of two replacement Team Associated Threaded Collars, and are intended for use with the Team Associated line of 1/10 scale vehicles equipped with the optional 12mm Big Bore Shock Set. This package also includes two o-rings.  

Add to Cart

Team Associated 12mm Factory Team V2 Flat Shock Piston (2x1.7mm) (4) — Team Associated

Team Associated 12mm Factory Team V2 Flat Shock Piston (2x1.7mm) (4)

$29.80

This is a pack of four optional Team Associated Factory Team V2 Flat Mount Shock Piston. These flat pistons feature two 1.7mm holes and are for use with 12mm shocks.  

Add to Cart

Team Associated 12mm FT V2 Flat Mount Shock Piston (4) (2x1.5mm) — Team Associated

Team Associated 12mm FT V2 Flat Mount Shock Piston (4) (2x1.5mm)

$29.80

This is a pack of four Team Associated Factory Team 12mm FT V2 Flat Mount Shock Pistons. These pistons features two 1.5mm holes.   

Add to Cart

Team Associated 12mm Heavy Duty Ballstud Set (8) — Team Associated

Team Associated 12mm Heavy Duty Ballstud Set (8)

$34.80

This is a replacement Team Associated 12mm Heavy Duty Ballstud Set, and is intended for use with the Associated SC10 4x4, B5 and B5M vehicles.  

Add to Cart

Team Associated 12mm Hex 2.2 Front Buggy Wheels (2) (B6) (White) — Team Associated

Team Associated 12mm Hex 2.2 Front Buggy Wheels (2) (B6) (White)

$14.90

This is a set of two optional Team Associated 2.2 1/10 buggy front wheels with a 12mm hex. Use these for your front wheels for 2wd offroad buggies on dirt

Add to Cart

Team Associated 12mm Hex 2.2 Front Buggy Wheels (2) (B6) (Yellow) — Team Associated

Team Associated 12mm Hex 2.2 Front Buggy Wheels (2) (B6) (Yellow)

$14.90

This is a set of two optional Team Associated 2.2 1/10 buggy front wheels with a 12mm hex. Use these for your front wheels for 2wd offroad buggies on dirt

Add to Cart

Team Associated 12mm Hex 2.2 Rear Hex Wheels (2) (B6/B64) (White) — Team Associated

Team Associated 12mm Hex 2.2 Rear Hex Wheels (2) (B6/B64) (White)

$16.90

This is a pair of Team Associated 2.2" Rear Hex Wheels, and are intended for use with the Team Associated B4.1 1/10 scale buggy equipped with the optional 12mm Hexes. These hex wheels will also work with the Team Losi Racing 22, Kyosho RB5 buggy and any...

Add to Cart

Team Associated 12mm Hex 2.2 Rear Hex Wheels (2) (B6/B64) (Yellow) — Team Associated

Team Associated 12mm Hex 2.2 Rear Hex Wheels (2) (B6/B64) (Yellow)

$16.90

This is a pair of Team Associated 2.2" Rear Hex Wheels, and are intended for use with the Team Associated B4.1 1/10 scale buggy equipped with the optional 12mm Hexes. These hex wheels will also work with the Team Losi Racing 22, Kyosho RB5 buggy and any...

Add to Cart

Team Associated 12mm V2 Big Bore Shock Rebuild Kit — Team Associated

Team Associated 12mm V2 Big Bore Shock Rebuild Kit

$19.90

This is a replacement Team Associated 12mm V2 Shock Rebuild Kit. This kit is compatible with the B44.3, B5, B5M and T5M models.   Contents: (12) V2 Shock Hat Bushing (8) Red O-Ring (4) Shock Cap O-Ring  

Sold Out

Team Associated 12mm V2 Shock Cap Bleeder Screw & Gasket Set — Team Associated

Team Associated 12mm V2 Shock Cap Bleeder Screw & Gasket Set

$5.50

This is a replacement Team Associated 12mm V2 Shock Cap Bleeder Screw & Gasket Set. Package includes two screws and two gaskets.

Add to Cart

Team Associated 12mm V2 X-Ring Rebuild Kit — Team Associated

Team Associated 12mm V2 X-Ring Rebuild Kit

$29.80

This is an optional Team Associated 12mm V2 X-Ring Rebuild Kit. Package includes eight x-ring type shock seals, and all the necessary shaft guides for four shocks.   

Add to Cart

Team Associated 12x23mm V2 Shock Bodies — Team Associated

Team Associated 12x23mm V2 Shock Bodies

$46.30

Team Associated 12x23mm V2 Shock Bodies

Add to Cart

Team Associated 3/32" Carbide Diff Balls (14) — Team Associated

Team Associated 3/32" Carbide Diff Balls (14)

$22.50

This is a pack of 14 optional 3/32" carbide differential balls for Team Associated cars and trucks. These will also work with any other vehicle that requires 3/32" differential balls.

Add to Cart

Team Associated 3/32" Ceramic Diff Balls (12) — Team Associated

Team Associated 3/32" Ceramic Diff Balls (12)

$29.80

This is a pack of 12 optional 3/32" ceramic differential balls for Team Associated cars and trucks. These will work with any vehicle that requires 3/32" differential balls.

Add to Cart

Team Associated 3x21mm V2 Chrome Screw Mount Buggy Front Shock Shaft (2) — Team Associated

Team Associated 3x21mm V2 Chrome Screw Mount Buggy Front Shock Shaft (2)

$31.50

This is a pack of two Team Associated 3x21mm V2 Chrome Screw Mount Buggy Front Shock Shafts. These shafts use a screw to hold the piston in place and a chrome coating for the smoothest action. NOTE: These screw-mounted shafts are not compatible with...

Add to Cart

Team Associated 3x21mm V2 Ti-Nitride Screw Mount Buggy Front Shock Shaft (2) — Team Associated

Team Associated 3x21mm V2 Ti-Nitride Screw Mount Buggy Front Shock Shaft (2)

$19.90

This is a pack of two Team Associated 3x21mm V2 Ti-Nitride Screw Mount Buggy Front Shock Shafts. These shafts use a screw to hold the piston in place and a Ti-Nitride coating for long life.    NOTE: These screw-mounted shafts are not...

Add to Cart

Team Associated 3x27.5mm V2 Chrome Screw Mount Shock Shaft (2) — Team Associated

Team Associated 3x27.5mm V2 Chrome Screw Mount Shock Shaft (2)

$31.50

This is a pack of two Team Associated 3x27.5mm V2 Chrome Screw Mount Shock Shafts. These shafts use a screw to hold the piston in place and a Chrome coating for the smoothest action. These are used with the TA10-91577 buggy rear shock bodies, as well as...

Add to Cart

Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shaft (2) — Team Associated

Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shaft (2)

$28.90

This is a pack of two Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts. These shafts use a screw to hold the piston in place and a Ti-Nitride coating for long life. These are used with the 91577 buggy rear shock bodies, as well as with the...

Add to Cart

Team Associated 3x48mm/1.875" Titanium Turnbuckle Set (Silver) (2) — Team Associated

Team Associated 3x48mm/1.875" Titanium Turnbuckle Set (Silver) (2)

$32.50

This is an optional Team Associated 1.875" Titanium Turnbuckle Set, and is intended for use with the Associated TC6.1 1/10 touring car.

Sold Out

Team Associated 3x7x3mm Ball Bearing (8) — Team Associated

Team Associated 3x7x3mm Ball Bearing (8)

$35.90

This is a pack of eight replacement Team Associated 3x7x3mm Ball Bearings. These bearings are used in the steering rack and steering bellcranks.  

Add to Cart

Team Associated 3x8mm Washer (10) — Team Associated

Team Associated 3x8mm Washer (10)

$5.40

This is a pack of ten replacement 3x8mm washers for the Team Associated off-road buggy.    

Add to Cart

Team Associated 4mm Heavy Duty Ball Stud Set (8) — Team Associated

Team Associated 4mm Heavy Duty Ball Stud Set (8)

$31.50

This is a replacement set of eight Team Associated 4mm Heavy Duty Ballstuds.  

Add to Cart

Team Associated 5.5x0.5mm Aluminum Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 5.5x0.5mm Aluminum Ball Stud Washer (Blue) (10)

$16.60

This is a pack of ten Team Associated 5.5x0.5mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications.    These small outside diameter shims, common for on-road, are now available...

Add to Cart

Team Associated 5.5x1.0mm Aluminum Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 5.5x1.0mm Aluminum Ball Stud Washer (Blue) (10)

$17.90

This is a pack of ten Team Associated 5.5x1.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications.    These small outside diameter shims, common for on-road, are now available...

Add to Cart

Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10)

$17.90

This is a pack of ten Team Associated 5.5x2.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications. These small outside diameter shims, common for on-road, are now available separately...

Add to Cart

Team Associated 5/64" Precision Differential Thrust Ball (6) — Team Associated

Team Associated 5/64" Precision Differential Thrust Ball (6)

$5.90

This is a set of six replacement differential thrust balls for the Team Associated vehicles. These balls go in the differential around the thrust bolt.

Add to Cart

Team Associated 6mm Heavy Duty Ballstud Set (8) — Team Associated

Team Associated 6mm Heavy Duty Ballstud Set (8)

$34.90

This is a replacement Team Associated 6mm Heavy Duty Ballstud Set, and is intended for use with the Associated SC10 4x4, B5 and B5M vehicles.

Add to Cart

Team Associated 6x12x4mm Factory Team Bearing (4) — Team Associated

Team Associated 6x12x4mm Factory Team Bearing (4)

$14.90

This is a pack of four Team Associated 6x12x4mm Factory Team Bearings. These bearings feature a blue rubber shield on one side of the bearing. These superior bearings will smooth out the play in critical areas of your vehicle for all-around performance...

Add to Cart

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2) — Team Associated

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2)

$25.90

This is a replacement Team Associated 7mm Clamping Wheel Hex Set, intended for use with the RC10 B5M Factory Lite kit. These hexes can be used optionally with the T5M to produce the stock offset. Additionally, these hexes can also be used with the B5 and...

Add to Cart

Team Associated 7.8x0.5mm Aluminum Bulkhead Washer (Blue) (10) — Team Associated

Team Associated 7.8x0.5mm Aluminum Bulkhead Washer (Blue) (10)

$17.90

This is a ten pack of Team Associated 0.5mm Thick Aluminum Bulkhead Washers. These washers are made from aluminum alloy material and anodized blue. Great for all 1:10 scale vehicles  

Add to Cart

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washer (Blue) (10)

$17.90

This is a pack of ten Team Associated 7.8x1.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications. These large outside diameter shims, common for off-road and bulkhead/arm mount shimming in...

Add to Cart

Team Associated 7.8x2.0mm Aluminum Bulkhead Washer (Blue) (10) — Team Associated

Team Associated 7.8x2.0mm Aluminum Bulkhead Washer (Blue) (10)

$17.90

This is a ten pack of Team Associated 2.0mm Thick Aluminum Bulkhead Washers. These washers are made from aluminum alloy material and anodized blue. Great for all 1:10 scale vehicles.

Add to Cart

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washer (Blue) (10)

$17.90

This is an optional Team Associated Blue 7.8x3.5x0.5mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top