B5 Series

Replacement and option parts for the Team Associated RC10 B5 series of 1/10 2wd offroad buggies. Please double check the part number in your manual to confirm compatibilty. If in doubt don't hesitate to contact us for advice

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washer (Blue) (10)

$17.90

This is an optional Team Associated Blue 7.8x3.5x1.0mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washer (Blue) (10)

$17.90

This is an optional Team Associated Blue 7.8x3.5x2.0mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Team Associated 8mm Heavy Duty Ballstud Set (7) — Team Associated

Team Associated 8mm Heavy Duty Ballstud Set (7)

$33.10

This is a replacement Team Associated 8mm Heavy Duty Ballstud Set, and is intended for use with the Associated SC10 4x4, B5 and B5M vehicles.  

Add to Cart

Team Associated AE Branding Decal Sheet — Team Associated

Team Associated AE Branding Decal Sheet

$13.20

Team Associated AE Branding Decal Sheet. This decal sheet features many brandings Team Associated is known for. Package includes one decal sheet.  

Add to Cart

Team Associated Aluminum Servo Washers (Black) — Team Associated

Team Associated Aluminum Servo Washers (Black)

$13.30

Team Associated Aluminum Servo Washers. Gain more secure servo mounting with these aluminum servo washers. They preserve the structural integrity of the servo ears. Package includes four washers. Features: Machined from aluminum and anodized...

Add to Cart

Team Associated Ball Cups & Steering Link Set — Team Associated

Team Associated Ball Cups & Steering Link Set

$26.50

This is a replacement Team Associated Ball Cups and Steering Link Set. Can be used for steering servo horn to bell crank on: RC8B3.1, RC8B3.1e, RC8T3, RC8T3.1, RC8T3.1e, RC8T3e   Includes:  (12) Ball Cups (1) Steering Link (4) Shock...

Add to Cart

Team Associated Ball Differential Gear — Team Associated

Team Associated Ball Differential Gear

$10.00

This is a replacement Team Associated Ball Differential Gear.   This gear will fit the Team Associated DR10, Pro2 SC10, RB10, RC10B5, RC10B6 Series, RC10B7 Series, RC10SC6 Series, RC10T6 series, and SR10 vehicles  

Add to Cart

Team Associated Caged Thrust Bearing Set — Team Associated

Team Associated Caged Thrust Bearing Set

$13.30

The Team Associated Caged Thrust Bearing Set is the perfect option to increase precision in your ball differential. This bearing set is intended for the RC10B6.3D, B6.2D, B6.1D, B6D, T6.1, SC6.1, T6.2 and SC6.2. The thrust balls ride in two V-grooved...

Add to Cart

Team Associated CVA Rebuild Kit — Team Associated

Team Associated CVA Rebuild Kit

$14.90

This is a replacement Team Associated CVA Rebuild Kit. This package includes two CVA couplers and two CVA pins.  

Add to Cart

Team Associated CVA/Wheel Hex Pin (4) — Team Associated

Team Associated CVA/Wheel Hex Pin (4)

$5.40

This is a pack of four replacement Team Associated CVA/Wheel Hex Pins. These pins can be used to connect the rear CVA axle and CVA bone, and to lock the wheel hexes to the front and rear axle.  

Add to Cart

Team Associated Differential Drive Rings (2) — Team Associated

Team Associated Differential Drive Rings (2)

$8.30

This is a set of two replacement differential drive rings from Team Associated. These rings go between the differential gear and the out drive hubs.

Add to Cart

Team Associated Differential Thrust Bolt, Bearing Cover & Locking T-Nut — Team Associated

Team Associated Differential Thrust Bolt, Bearing Cover & Locking T-Nut

$11.60

This is a replacement t-nut, and thrust bolt set for the Team Associated RC10GT2 1/10th scale off-road truck. This set includes one thrust bolt, one thrust bearing cover, two dog bone spacers, and one t-nut. The parts are intended for use with RC10B4,...

Add to Cart

Team Associated Factory Team 1/10 Front One-Piece Carbon Fiber Wing Button — Team Associated

Team Associated Factory Team 1/10 Front One-Piece Carbon Fiber Wing Button

$11.60

Team Associated Factory Team 1/10 Front One-Piece Carbon Fiber Wing Button. This optional one-piece carbon fiber wing button offers strength, style and convenience to your 1/10 vehicle. Constructed from high quality carbon fiber this wing button offers...

Add to Cart

Team Associated Factory Team 1/4 oz. Chassis Weights (2oz) — Team Associated

Team Associated Factory Team 1/4 oz. Chassis Weights (2oz)

$10.00

This is a pack of self stick chassis weights from Team Associated. These self stick weights can be used to balance your chassis. Package includes a total of 2oz of weight.  

Add to Cart

Team Associated Factory Team 5x10x4mm Bearings (4) — Team Associated

Team Associated Factory Team 5x10x4mm Bearings (4)

$14.90

This is a pack of four Team Associated Factory Team 5x10x4mm Bearings. Compare your bearing size and replace your worn-out bearings or bushings. These bearings will smooth out the play in critical areas of your vehicle for all-around performance gains...

Add to Cart

Team Associated Factory Team 6x13x5mm Bearings (4) — Team Associated

Team Associated Factory Team 6x13x5mm Bearings (4)

$14.90

This is a pack of four Team Associated Factory Team 6x13x5mm Bearings. Compare your bearing size and replace your worn-out bearings or bushings. These bearings will smooth out the play in critical areas of your vehicle for all-around performance gains...

Add to Cart

Team Associated Factory Team Aluminum Idler Shaft Set (2) — Team Associated

Team Associated Factory Team Aluminum Idler Shaft Set (2)

$8.90

This is an optional Team Associated Factory Team Aluminum Idler Shaft Set, and is intended for use with the Associated SC10 4x4. This package includes two aluminum idler shafts that can be used in either the front or rear transmission.  

Add to Cart

Team Associated Factory Team Body Clips (Blue) — Team Associated

Team Associated Factory Team Body Clips (Blue)

$9.40

This is a pack of six replacement Factory Team short blue body clips from Team Associated.    

Add to Cart

Team Associated Factory Team FOX Kashima Coated V2 Buggy 23mm Front Shock Body (2) — Team Associated

Team Associated Factory Team FOX Kashima Coated V2 Buggy 23mm Front Shock Body (2)

$59.60

This is a pack of two optional Team Associated Factory Team 12x23mm V2 Fox Kashima Coated Buggy Front Shock Bodies. Team Associated is taking RC shock performance to the next level! These shock bodies feature Genuine Fox Kashima® Coat, to provide the...

Add to Cart

Team Associated Factory Team Low Friction X-Rings (8) — Team Associated

Team Associated Factory Team Low Friction X-Rings (8)

$17.90

This is a pack of eight optional Team Associated Factory Team Low Friction X-Rings. These X-Ring shock seals provide a better seal with reduced friction for improved overall performance.

Add to Cart

Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.6mm) — Team Associated

Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.6mm)

$24.80

Team Associated Factory Team Thin 12mm Big Bore Flat Shock Pistons are cut to make them thinner than a standard piston and measure approximately 1.75mm thick.    These thinner shock pistons give you less "pack" inside the 12mm shock. Terrific...

Add to Cart

Team Associated Factory Team V2 Flat Mount Shock Piston (2x1.6mm)(4) — Team Associated

Team Associated Factory Team V2 Flat Mount Shock Piston (2x1.6mm)(4)

$29.80

This is a pack of four Team Associated Factory Team 12mm Big Bore V2 Flat Screw Mount Shock Pistons, with two 1.6mm holes. These pistons have been machined to provide a precision fit and finish. The edges have been radiused for smooth shock action...

Add to Cart

Team Associated Factory Team V2 Flat Mount Shock Piston Set (3x1.4mm)(4) — Team Associated

Team Associated Factory Team V2 Flat Mount Shock Piston Set (3x1.4mm)(4)

$29.80

This is a pack of four Team Associated Factory Team 12mm Big Bore V2 Flat Screw Mount Shock Pistons, with three 1.4mm holes. These pistons have been machined to provide a precision fit and finish. The edges have been radiused for smooth shock action...

Add to Cart

Team Associated Factory Team V2 Flat Mount Shock Piston Set (Blank)(4) — Team Associated

Team Associated Factory Team V2 Flat Mount Shock Piston Set (Blank)(4)

$29.80

This is a pack of four Team Associated Factory Team 12mm Big Bore V2 Flat Screw Mount Shock Pistons. These pistons are left blank so you can drill your own holes and create your own custom piston valving, and the factory machined dimples allow you to...

Add to Cart

Team Associated Factory Team V2 Tapered Mount Shock Piston Set (3x1.4mm)(4) — Team Associated

Team Associated Factory Team V2 Tapered Mount Shock Piston Set (3x1.4mm)(4)

$24.80

This is a pack of four Team Associated Factory Team 12mm Big Bore V2 Tapered Screw Mount Shock Pistons, with three 1.4mm holes. These pistons have been machined to provide a precision fit and finish, and feature a tapered profile that allows you to alter...

Add to Cart

Team Associated Factory Team V2 Tapered Mount Shock Piston Set (Blank)(4) — Team Associated

Team Associated Factory Team V2 Tapered Mount Shock Piston Set (Blank)(4)

$24.80

This is a pack of four Team Associated Factory Team 12mm Big Bore V2 Tapered Screw Mount Shock Pistons. These pistons are left blank so you can drill your own holes and create your own custom piston valving, and the factory machined dimples allow you to...

Add to Cart

Team Associated Nylon Axle/Shock/Hub Carrier Spacer — Team Associated

Team Associated Nylon Axle/Shock/Hub Carrier Spacer

$6.70

This is a pack of nylon front axles spacers for Team Associated trucks and buggies. You can also use these to adjust the camber link locations under the ball studs   This part fits the following vehicles: RC10B74 RC10B6.1 RC10B6.1D RC10B6...

Add to Cart

Team Associated Octalock 48P Spur Gear (72T) — Team Associated

Team Associated Octalock 48P Spur Gear (72T)

$13.20

The Team Associated Octalock 48P Spur Gear, launched with the RC10B74.1 buggy, introduces the latest spur gear design from Team Associated. In addition to the octagon shape, each pad has eight locking tabs that engage with the spur gear for maximum...

Add to Cart

Team Associated Octalock 48P Spur Gear (75T) — Team Associated

Team Associated Octalock 48P Spur Gear (75T)

$13.20

The Team Associated Octalock 48P Spur Gear, launched with the RC10B74.1 buggy, introduces the latest spur gear design from Team Associated. In addition to the octagon shape, each pad has eight locking tabs that engage with the spur gear for maximum...

Add to Cart

Team Associated Octalock 48P Spur Gear (78T) — Team Associated

Team Associated Octalock 48P Spur Gear (78T)

$13.20

The Team Associated Octalock 48P Spur Gear, launched with the RC10B74.1 buggy, introduces the latest spur gear design from Team Associated. In addition to the octagon shape, each pad has eight locking tabs that engage with the spur gear for maximum...

Add to Cart

Team Associated Octalock 48P Spur Gear (81T) — Team Associated

Team Associated Octalock 48P Spur Gear (81T)

$13.20

The Team Associated Octalock 48P Spur Gear, launched with the RC10B74.1 buggy, introduces the latest spur gear design from Team Associated. In addition to the octagon shape, each pad has eight locking tabs that engage with the spur gear for maximum...

Add to Cart

Team Associated Octalock 48P Spur Gear (87T) — Team Associated

Team Associated Octalock 48P Spur Gear (87T)

$13.20

The Team Associated Octalock 48P Spur Gear, launched with the RC10B74.1 buggy, introduces the latest spur gear design from Team Associated. In addition to the octagon shape, each pad has eight locking tabs that engage with the spur gear for maximum...

Add to Cart

Team Associated RC10B6 Ball Differential Rebuild Kit w/Caged Thrust Bearing — Team Associated

Team Associated RC10B6 Ball Differential Rebuild Kit w/Caged Thrust Bearing

$38.10

The Team Associated RC10B6 Ball Differential Rebuild Kit with Caged Thrust Bearing is a great option for increasing differential precision. This rebuild kit is designed for the RC10B6.3D, B6.2D, B6.1D, B6D, T6.1, SC6.1, T6.2 and SC6.2. The included caged...

Add to Cart

Team Associated Small Body Clips (10) — Team Associated

Team Associated Small Body Clips (10)

$6.70

This is a set of ten replacement body clips for the Team Associated RC10GT2 1/10th scale off-road truck. These are used to hold the body on the vehicle as well as the lid on the receiver box  

Add to Cart

Team Associated VCS3 Lower Shock Cap Set w/O-Rings (2) — Team Associated

Team Associated VCS3 Lower Shock Cap Set w/O-Rings (2)

$14.90

This is a replacement Team Associated VCS3 Lower Shock Cap Set. The set includes two lower caps, and two o-rings.

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top