B64 Series

Replacement and option parts for the Team Associated RC10 B64 series of 1/10 4wd offroad buggies. Please double check the part number in your manual to confirm compatibilty. If in doubt don't hesitate to contact us for advice

(D) Team Associated 12mm Front Shock Spring (Yellow/3.75lbs) — Team Associated

(D) Team Associated 12mm Front Shock Spring (Yellow/3.75lbs)

$10.80

This is an optional Team Associated 12mm Front Spring Set, and is intended for use with the Team Associated B4.1, B44.1, T4.1, SC10 and SC10GT 1/10 scale vehicles equipped with the optional Team Associated Big Bore Shock Set. Effects of Shock Spring...

Add to Cart

(D) Team Associated 5x8mm Ball Bearing (2) — Team Associated

(D) Team Associated 5x8mm Ball Bearing (2)

$15.20

This is a pack of two replacement Team Associated 5x8mm Ball Bearings.    This part fits the following vehicles: RC10B74 RC10B6.1 RC10B6.1D RC10B6.1DL RC10B6.1 Factory Lite RC10T6.1

Add to Cart

(D)Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.7mm) — Team Associated

(D)Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.7mm)

$24.80

Team Associated Factory Team Thin 12mm Big Bore Flat Shock Pistons are cut to make them thinner than a standard piston and measure approximately 1.75mm thick. The shocks feature two 1.7mm holes.    These thinner shock pistons give you less...

Add to Cart

Team Associated 10mm Factory Team Heavy Duty Titanium Ball Stud Set (2) — Team Associated

Team Associated 10mm Factory Team Heavy Duty Titanium Ball Stud Set (2)

$29.80

Team Associated 10mm Factory Team Heavy Duty Titanium Ball Stud Set. This optional ball stud can be used in place of TA10-91049. In the B6 and B6D model this ball stud is used in the rear axle carrier, front inner camber link mount, c-hub steering rack,...

Add to Cart

Team Associated 10mm Heavy Duty Ballstud Set (8) — Team Associated

Team Associated 10mm Heavy Duty Ballstud Set (8)

$36.90

This is a replacement Team Associated 10mm Heavy Duty Ballstud Set, and is intended for use with the Associated SC10 4x4, B5 and B5M vehicles.  

Add to Cart

Team Associated 10x15x4mm Factory Team Bearing (4) — Team Associated

Team Associated 10x15x4mm Factory Team Bearing (4)

$17.90

This is a pack of four Team Associated 10x15x4mm Factory Team Bearings.  

Add to Cart

Team Associated 12mm Big Bore Threaded Collar (Blue) (2) — Team Associated

Team Associated 12mm Big Bore Threaded Collar (Blue) (2)

$16.60

This is a pack of two replacement Team Associated Threaded Collars, and are intended for use with the Team Associated line of 1/10 scale vehicles equipped with the optional 12mm Big Bore Shock Set. This package also includes two o-rings.  

Add to Cart

Team Associated 12mm Big Bore V2 Machined Shock Spacers — Team Associated

Team Associated 12mm Big Bore V2 Machined Shock Spacers

$18.80

Team Associated 12mm Big Bore V2 Machined Shock Spacers. These are the replacement shock shaft guides for the RC10 B6 and B6D buggies. Package includes all the shock shaft guides and seal cartridge spacers needed for four shocks.  

Add to Cart

Team Associated 12mm Factory Team V2 Flat Shock Piston (2x1.7mm) (4) — Team Associated

Team Associated 12mm Factory Team V2 Flat Shock Piston (2x1.7mm) (4)

$29.80

This is a pack of four optional Team Associated Factory Team V2 Flat Mount Shock Piston. These flat pistons feature two 1.7mm holes and are for use with 12mm shocks.  

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Blue/3.90lbs) (44mm long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Blue/3.90lbs) (44mm long)

$12.50

This is a pack of 12mm Big Bore Team Associated Front Shock Springs, rated at 3.90lbs. These springs are identified as Blue for easy identification, and are intended for use on the front of the B6.1 and B6.1D.

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Gray/3.60lbs) (44mm long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Gray/3.60lbs) (44mm long)

$12.50

This is a pack of 12mm Big Bore Team Associated Front Shock Springs, rated at 3.60lbs. These springs are identified as Gray for easy identification, and are intended for use on the front of the B6.1 and B6.1D.  

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Green/3.10lbs) (44mm long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Green/3.10lbs) (44mm long)

$12.50

This is a pack of two optional Team Associated 12mm Front Shock Springs. These springs are rated 3.10lbs and are colored green for easy identification. These springs are 44mm long.   

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Orange/5.10lbs) (44mm Long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Orange/5.10lbs) (44mm Long)

$12.50

This is a pack of two Team Associated 12mm Front Shock Springs. These front shock springs are 44mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Red/4.60lbs) (44mm Long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Red/4.60lbs) (44mm Long)

$12.50

This is a pack of two Team Associated 12mm Front Shock Springs. These front shock springs are 44mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.

Add to Cart

Team Associated 12mm Front Shock Spring (2) (White/3.40lbs) (44mm Long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (White/3.40lbs) (44mm Long)

$12.50

This is a pack of two Team Associated 12mm Front Shock Springs. These front shock springs are 44mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.  

Add to Cart

Team Associated 12mm Front Shock Spring (2) (Yellow/4.30lbs) (44mm Long) — Team Associated

Team Associated 12mm Front Shock Spring (2) (Yellow/4.30lbs) (44mm Long)

$12.50

This is a pack of two Team Associated 12mm Front Shock Springs. These front shock springs are 44mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.   

Add to Cart

Team Associated 12mm FT V2 Flat Mount Shock Piston (4) (2x1.5mm) — Team Associated

Team Associated 12mm FT V2 Flat Mount Shock Piston (4) (2x1.5mm)

$29.80

This is a pack of four Team Associated Factory Team 12mm FT V2 Flat Mount Shock Pistons. These pistons features two 1.5mm holes.   

Add to Cart

Team Associated 12mm Hex 2.2 4WD Front Buggy Wheels (2) (B64) (White) — Team Associated

Team Associated 12mm Hex 2.2 4WD Front Buggy Wheels (2) (B64) (White)

$16.90

This is a set of two replacement white front wheels for the Team Associated B74 4WD buggy. These rims feature a white nylon construction which makes them tough, yet lightweight. These wheels are the same diameter and offset that Team Associated has used...

Add to Cart

Team Associated 12mm Hex 2.2 4WD Front Buggy Wheels (2) (B64) (Yellow) — Team Associated

Team Associated 12mm Hex 2.2 4WD Front Buggy Wheels (2) (B64) (Yellow)

$16.90

This is a set of two replacement yellow front wheels for the Team Associated B74 4WD buggy. These rims feature a yellow nylon construction which makes them tough, yet lightweight. These wheels are the same diameter and offset that Team...

Add to Cart

Team Associated 12mm Hex 2.2 Rear Hex Wheels (2) (B6/B64) (White) — Team Associated

Team Associated 12mm Hex 2.2 Rear Hex Wheels (2) (B6/B64) (White)

$16.90

This is a pair of Team Associated 2.2" Rear Hex Wheels, and are intended for use with the Team Associated B4.1 1/10 scale buggy equipped with the optional 12mm Hexes. These hex wheels will also work with the Team Losi Racing 22, Kyosho RB5 buggy and any...

Add to Cart

Team Associated 12mm Hex 2.2 Rear Hex Wheels (2) (B6/B64) (Yellow) — Team Associated

Team Associated 12mm Hex 2.2 Rear Hex Wheels (2) (B6/B64) (Yellow)

$16.90

This is a pair of Team Associated 2.2" Rear Hex Wheels, and are intended for use with the Team Associated B4.1 1/10 scale buggy equipped with the optional 12mm Hexes. These hex wheels will also work with the Team Losi Racing 22, Kyosho RB5 buggy and any...

Add to Cart

Team Associated 12mm Rear Shock Spring (2) (Blue/2.20lbs) (61mm Long) — Team Associated

Team Associated 12mm Rear Shock Spring (2) (Blue/2.20lbs) (61mm Long)

$13.90

This is a pack of two Team Associated 12mm Rear Shock Springs. These rear shock springs are 61mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.

Sold Out

Team Associated 12mm Rear Shock Spring (2) (Gray/2.0lbs) (61mm Long) — Team Associated

Team Associated 12mm Rear Shock Spring (2) (Gray/2.0lbs) (61mm Long)

$13.90

This is a pack of 12mm Big Bore Team Associated Rear Shock Springs, rated at 2.0lbs. These springs are identified as Gray for easy identification, and are intended for use on the rear of the B6.1 and B6.1D.  

Sold Out

Team Associated 12mm Rear Shock Spring (2) (Green/1.80lbs) (61mm Long) — Team Associated

Team Associated 12mm Rear Shock Spring (2) (Green/1.80lbs) (61mm Long)

$13.90

This is a pack of two Team Associated 12mm Rear Shock Springs. These rear shock springs are 61mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.

Add to Cart

Team Associated 12mm Rear Shock Spring (2) (White/1.90lbs) (61mm Long) — Team Associated

Team Associated 12mm Rear Shock Spring (2) (White/1.90lbs) (61mm Long)

$13.90

This is a pack of two Team Associated 12mm Rear Shock Springs. These rear shock springs are 61mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification.   

Add to Cart

Team Associated 12mm Rear Shock Spring (2) (Yellow/2.30lbs) (61mm Long) — Team Associated

Team Associated 12mm Rear Shock Spring (2) (Yellow/2.30lbs) (61mm Long)

$13.90

This is a pack of 12mm Big Bore Team Associated Rear Shock Springs, rated at 2.3lbs. These springs are identified as Yellow for easy identification, and are intended for use on the rear of the B6.1 and B6.1D.

Add to Cart

Team Associated 12mm V2 Big Bore Shock Rebuild Kit — Team Associated

Team Associated 12mm V2 Big Bore Shock Rebuild Kit

$19.90

This is a replacement Team Associated 12mm V2 Shock Rebuild Kit. This kit is compatible with the B44.3, B5, B5M and T5M models.   Contents: (12) V2 Shock Hat Bushing (8) Red O-Ring (4) Shock Cap O-Ring  

Sold Out

Team Associated 12mm V2 Shock Cap Bleeder Screw & Gasket Set — Team Associated

Team Associated 12mm V2 Shock Cap Bleeder Screw & Gasket Set

$5.50

This is a replacement Team Associated 12mm V2 Shock Cap Bleeder Screw & Gasket Set. Package includes two screws and two gaskets.

Add to Cart

Team Associated 12mm V2 X-Ring Rebuild Kit — Team Associated

Team Associated 12mm V2 X-Ring Rebuild Kit

$29.80

This is an optional Team Associated 12mm V2 X-Ring Rebuild Kit. Package includes eight x-ring type shock seals, and all the necessary shaft guides for four shocks.   

Add to Cart

Team Associated 12x23mm V2 Shock Bodies — Team Associated

Team Associated 12x23mm V2 Shock Bodies

$46.30

Team Associated 12x23mm V2 Shock Bodies

Add to Cart

Team Associated 12x27.5 V2 Rear Shock Body (2) — Team Associated

Team Associated 12x27.5 V2 Rear Shock Body (2)

$46.30

This is a pack of two replacement Team Associated 12x27.5 V2 Shock Bodies.   

Sold Out

Team Associated 2.6x6mm Washers (20) — Team Associated

Team Associated 2.6x6mm Washers (20)

$8.30

This is a pack of twenty replacement Team Associated 2.6x6mm Washers    

Add to Cart

Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft (2) — Team Associated

Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft (2)

$32.90

Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft. These are compatible with the B64D and B6 vehicles. Package includes two shock shafts and hardware.

Add to Cart

Team Associated 3x23mm V2 Ti-Nitride Screw Mount Front Shock Shaft (2) — Team Associated

Team Associated 3x23mm V2 Ti-Nitride Screw Mount Front Shock Shaft (2)

$21.50

Team Associated 3x23mm V2 Ti-Nitride Screw Mount Front Shock Shaft. These are compatible with the B74.1, B64D and B6 vehicles. Package includes two shock shafts and hardware.

Sold Out

Team Associated 3x27.5mm V2 Chrome Screw Mount Shock Shaft (2) — Team Associated

Team Associated 3x27.5mm V2 Chrome Screw Mount Shock Shaft (2)

$31.50

This is a pack of two Team Associated 3x27.5mm V2 Chrome Screw Mount Shock Shafts. These shafts use a screw to hold the piston in place and a Chrome coating for the smoothest action. These are used with the TA10-91577 buggy rear shock bodies, as well as...

Add to Cart

Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shaft (2) — Team Associated

Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shaft (2)

$28.90

This is a pack of two Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts. These shafts use a screw to hold the piston in place and a Ti-Nitride coating for long life. These are used with the 91577 buggy rear shock bodies, as well as with the...

Add to Cart

Team Associated 3x42mm Turnbuckles — Team Associated

Team Associated 3x42mm Turnbuckles

$13.30

Team Associated 3x42mm Turnbuckles. These are standard replacement 3x42mm turnbuckles for the B74.1 buggy. Package includes two turnbuckles.  

Add to Cart

Team Associated 3x48mm/1.875" Titanium Turnbuckle Set (Silver) (2) — Team Associated

Team Associated 3x48mm/1.875" Titanium Turnbuckle Set (Silver) (2)

$32.50

This is an optional Team Associated 1.875" Titanium Turnbuckle Set, and is intended for use with the Associated TC6.1 1/10 touring car.

Sold Out

Team Associated 3x7x3mm Ball Bearing (8) — Team Associated

Team Associated 3x7x3mm Ball Bearing (8)

$35.90

This is a pack of eight replacement Team Associated 3x7x3mm Ball Bearings. These bearings are used in the steering rack and steering bellcranks.  

Add to Cart

Team Associated 3x8mm Washer (10) — Team Associated

Team Associated 3x8mm Washer (10)

$5.40

This is a pack of ten replacement 3x8mm washers for the Team Associated off-road buggy.    

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top