iFlight Nazgul5 V2 6S Analog FPV Freestyle Drone - PNP

Description
Review
Custom Product Tab

PRODUCT DESCRIPTION

Nazgul5 V2 is a 5" size PNP (Plug-and-Play) quadcopter. It is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need, just connect your receiver and battery then go fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

HIGHLIGHTS:

- 5mm arm design for more durability

- Easy-Swap arms

- LED illuminated Logo

- XING-E 2207 motors and NAZGUL 5140 props

- 5" version also fits 5.1" style propellers

- Popular True-X configuration

- TPU crash-guards

- Fits both 30.5x and 20x stacks

XL5 V5 frame specs:

SucceX-E F4 45A flight stack

XING-E 2207 FPV Motor （6S 1800kv)

Wheelbase: 240mm*240mm

Body size: 170*170mm

Propeller size: 5 inch /5.1 inch

FC pattern: 30.5*30.5/20*20 mm

FPV cam spacing: 19mm

Weight: 400.8g (without battery)

PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

Nazgul5 V2 Quad BNF Included Components and Parts

Prebuilt and tested Quadcopter

1x XL5 V5 Frame

1x Caddx Ratel, 2.1mm lens camera

1x Albatross RHCP SMA 5.8g antenna

2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)

1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)

1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

FC // SucceX-E F4 Flight controller

- MCU：STM32F405

- Gyro：MPU6000

- Betaflight OSD：YES

- Blackbox：8MB

- 4X Uarts（1 2 3 6 )

- 8 x Dshot/Proshot/Oneshot output

- 8 x individual ESC power/ signal pads

- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX

- VTX telemetry: YES

- WS2812 led Strip：YES

- Baro：No

- Beeper：YES

- Input：2-6S（Max 8S）

- BEC：5V/2.5A cont

- Firmware target : BETAFLIGHTF4

- Mounting：30.5*30.5mm，φ4mm with Grommets φ3mm

- Dimensions：36*36mm

- Weight：7.6g

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

- Dimension: 40*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight: 14.4g

- Supports 2-6S Lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware

- Current sensor: YES

- BEC: NO

- Supports: DShot150/300/600/1200/MultiShot/OneShot etc.

- Target: G-H-30 BLS 16.7

VTX// SucceX Force 5.8g 800mW VTX Adjustable

- The output power is stable;

- Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;

- Output 48 frequency points,

- Frequency lock fast, the boot does not interfere with companions;

- Built-in output power self-check function;

- Full format video format: NTSC /PAL;

- Wide input voltage range. low power consumption:

7V～36V，+12V/380mA@800mW;

- Small size:36*36*3mm

- Mounting holes 4-M3

- Lightweight: 7.2g(excluding antenna)

Specs:

- Item: SucceX-Force 800mW adjustable VTX

- Input voltage:5V

- Output voltage/ Max current: 5V 1A

- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@400mW, 380mA@800mW

- Output 48 frequency points,

- size:36*36*3mm

- PIT/25mW/200mW/400mW/800mW

Additional Suggested Parts

Radio Controller and receiver

Battery 6S 1300mAh

GoPro Mounts

Write a Review

Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.