ProTek RC Parts

ProTek RC Mini Universal Radio Case (Futaba 10PX & 10PXLE) — ProTek RC

ProTek RC Mini Universal Radio Case (Futaba 10PX & 10PXLE)

$112.17

ProTek RC Mini Universal Radio Case (Futaba 10PX & 10PXLE) Introducing the ProTek RC Mini Universal Radio Case with an included foam insert. Everyone loves getting a new radio system, but no one enjoys the extra cost of a new case to protect it...

Add to Cart

ProTek RC Mini Universal Radio Case (Sanwa M17) — ProTek RC

ProTek RC Mini Universal Radio Case (Sanwa M17)

$112.17

ProTek RC Mini Universal Radio Case (Sanwa M17) Introducing the ProTek RC Mini Universal Radio Case with an included foam insert. Everyone loves getting a new radio system, but no one enjoys the extra cost of a new case to protect it. That's why the...

Sold Out

ProTek RC 4-Shoe Clutch Vented Clutch Bell (14T) — ProTek RC

ProTek RC 4-Shoe Clutch Vented Clutch Bell (14T)

$26.87

ProTek RC 4-Shoe Clutch Vented Clutch Bell (14T) The ProTek RC 4-Shoe Clutch Bell features hardened steel construction with a vented face to reduce clutch shoe temperatures, creating a more consistent clutch engagement. This clutch bell has a 26.5mm...

Add to Cart

ProTek RC .21 & .28 Engine Carburetor Exhaust & Fuel Inlet Cap Set — ProTek RC

ProTek RC .21 & .28 Engine Carburetor Exhaust & Fuel Inlet Cap Set

$3.39

ProTek RC .21 & .28 Engine Carburetor Exhaust & Fuel Inlet Cap Set This is a replacement ProTek R/C .21 & .28 Engine Carburetor, Exhaust and Fuel Inlet Caps Set. This set includes a 3mm banjo fitting cap, 16mm carburetor cap, and a 17mm...

Add to Cart

ProTek RC 1/8 Buggy Tire Tube w/Cap — ProTek RC

ProTek RC 1/8 Buggy Tire Tube w/Cap

$14.70

ProTek RC 1/8 Buggy Tire Tube w/Cap ProTek 1/8 Buggy Tire Tubes are an airtight 8" tall, 4.75" diameter screw on lid storage tube that is perfect for 1/8 Buggy, 1/10 Short Course, No Prep/Outlaw Drag Racing and Crawler tires smaller than 4.75". These...

Add to Cart

ProTek RC 17mm Captured & Knurled Magnetic Wheel Nuts (4) (Black) — ProTek RC

ProTek RC 17mm Captured & Knurled Magnetic Wheel Nuts (4) (Black)

$30.35

ProTek RC 17mm Captured & Knurled Magnetic Wheel Nuts (4) (Black) ProTek RC 17mm Captured and Knurled Magnetic Wheel Nuts. Crafted with precision, these aluminum wheel nuts feature a knurled design for a secure grip on the wheels. Additionally, the...

Add to Cart

ProTek RC 35x35x10mm Aluminum High Speed HV Cooling Fan (Silver/Black) — ProTek RC

ProTek RC 35x35x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)

$30.35

ProTek RC 35x35x10mm Aluminum High Speed HV Cooling Fan (Silver/Black) The ProTek RC 35x35x10mm Aluminum High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check. The fan is a true 2S HV component that has been built to last...

Add to Cart

ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Blue/Black) — ProTek RC

ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Blue/Black)

$26.87

The ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check. The fan features a machined aluminum case that helps to dissipate heat, allowing cooler operation of the fan motor at high voltage...

Add to Cart

ProTek RC Blue Thread Lock (Medium) (0.34oz) — ProTek RC

ProTek RC Blue Thread Lock (Medium) (0.34oz)

$12.09

ProTek RC Blue Thread Lock (Medium) (0.34oz) ProTek R/C Blue Thread Locker is a medium thickness, medium strength formula that provides great resistance towards shocks and vibrations, yet still allows hardware to be removed and disassembled with hand...

Add to Cart

ProTek RC 34mm 4-Shoe Off-Road Clutch Set (2 Aluminum/2 Composite Shoes) — ProTek RC

ProTek RC 34mm 4-Shoe Off-Road Clutch Set (2 Aluminum/2 Composite Shoes)

$120.87

The ProTek RC 4-Shoe Off-Road Clutch Set was developed in collaboration with ProTek team drivers, for discriminating 1/8 scale racers. This premium level clutch features a 34mm aluminum 4 shoe flywheel with removable steel pins so you can replace them...

Add to Cart

ProTek RC 4-Shoe 0.95 Clutch Spring (4) — ProTek RC

ProTek RC 4-Shoe 0.95 Clutch Spring (4)

$11.22

ProTek 4-Shoe 0.95 Clutch Spring. These are the replacement ProTek 4-Shoe clutch springs. Package includes four 0.95 clutch springs.

Add to Cart

ProTek RC 4-Shoe Clutch Flywheel Nut — ProTek RC

ProTek RC 4-Shoe Clutch Flywheel Nut

$9.48

ProTek 4-Shoe Clutch Flywheel Nut. This the replacement ProTek 4-Shoe clutch flywheel nut. Package includes one flywheel nut. 

Add to Cart

ProTek RC 4-Shoe Clutch Flywheel Cone Collet — ProTek RC

ProTek RC 4-Shoe Clutch Flywheel Cone Collet

$6.00

ProTek 4-Shoe Clutch Flywheel Cone. This is the replacement ProTek 4-Shoe clutch flywheel collet. Package includes one collet.

Add to Cart

ProTek RC 4-Shoe 0.9 Clutch Spring (4) — ProTek RC

ProTek RC 4-Shoe 0.9 Clutch Spring (4)

$11.22

ProTek 4-Shoe 0.9 Clutch Spring. These are the replacement ProTek 4-Shoe clutch springs. Package includes four 0.9 clutch springs.

Add to Cart

ProTek RC 4-Shoe 1.0 Clutch Spring (4) — ProTek RC

ProTek RC 4-Shoe 1.0 Clutch Spring (4)

$11.22

ProTek 4-Shoe 1.0 Clutch Spring. These are the replacement ProTek 4-Shoe clutch springs. Package includes four 1.0 clutch springs.

Add to Cart

ProTek RC 4-Shoe Composite Clutch Shoe (2) — ProTek RC

ProTek RC 4-Shoe Composite Clutch Shoe (2)

$28.61

ProTek RC 4-Shoe Composite Clutch Shoes are ideal for rough, low traction surfaces and will help to make the car easier to drive in these conditions. Package includes two composite shoes.

Add to Cart

ProTek RC 4-Shoe Aluminum Clutch Shoe (2) — ProTek RC

ProTek RC 4-Shoe Aluminum Clutch Shoe (2)

$19.04

ProTek RC 4-Shoe Aluminum Clutch Shoes are machined from 7075 aluminum, and are ideal for smooth, high traction surfaces, where a more aggressive setup can be successfully utilized. Package includes two aluminum shoes.

Add to Cart

ProTek RC 4-Shoe Clutch Flywheel Pin Set (4) — ProTek RC

ProTek RC 4-Shoe Clutch Flywheel Pin Set (4)

$18.17

ProTek 4-Shoe Clutch Flywheel Pin Set. These are the replacement ProTek 4-Shoe clutch flywheel pins. Package includes four clutch pins.

Add to Cart

ProTek RC 4-Shoe Clutch Flywheel w/Nut — ProTek RC

ProTek RC 4-Shoe Clutch Flywheel w/Nut

$32.96

ProTek 4-Shoe Flywheel. This is the replacement ProTek 4-Shoe flywheel and clutch nut. Package includes flywheel and clutch nut. 

Add to Cart

ProTek RC 34mm 4-Shoe Off-Road Clutch Set (4 Aluminum Shoes) — ProTek RC

ProTek RC 34mm 4-Shoe Off-Road Clutch Set (4 Aluminum Shoes)

$103.48

The ProTek RC 4-Shoe Off-Road Clutch Set was developed in collaboration with ProTek team drivers, for discriminating 1/8 scale racers. This premium level clutch features a 34mm aluminum 4 shoe flywheel with removable steel pins so you can replace them...

Add to Cart

ProTek RC Samurai RM.1, RM, S03 & R03 Piston Wrist Pin Retainer Clip (6) — ProTek RC

ProTek RC Samurai RM.1, RM, S03 & R03 Piston Wrist Pin Retainer Clip (6)

$11.22

ProTek R/C Samurai RM.1, RM, S03 & R03 Piston Wrist Pin Retainer Clip. Package includes six replacement wrist pin clips.   

Add to Cart

ProTek RC Samurai RM.1, RM, S03 & R03 Piston Wrist Pin — ProTek RC

ProTek RC Samurai RM.1, RM, S03 & R03 Piston Wrist Pin

$11.22

This is a replacement ProTek R/C Wrist Pin for use with the RM.1, RM, S03 and R03 Nitro Engines. The wrist pin is the small pin that goes through the piston to attach the connecting rod. You will need wrist pin clips to hold the pin in place and it is...

Add to Cart

ProTek RC Samurai RM.1, RM, S03 High Speed Needle — ProTek RC

ProTek RC Samurai RM.1, RM, S03 High Speed Needle

$12.96

This is a replacement ProTek R/C Samurai 321B, RM.1,RM and S03 High Speed Needle. This package includes the high speed needle, as well as one high speed needle o-ring. These o-rings can also be purchases separately (PTK-2540). The high speed needle is...

Add to Cart

ProTek RC Samurai RM.1, RM High Speed Needle Housing Assembly — ProTek RC

ProTek RC Samurai RM.1, RM High Speed Needle Housing Assembly

$17.30

This is a replacement ProTek R/C Samurai RM.1, RM, 321B High Speed Needle Housing Assembly. This is the housing that holds the High Speed Needle and is screwed into the carburetor body securing the fuel inlet to the carburetor. The fuel inlet fitting is...

Add to Cart

ProTek RC Samurai RM.1, RM, CR21, S03 & R03 Idle Speed Needle O-Ring (2) — ProTek RC

ProTek RC Samurai RM.1, RM, CR21, S03 & R03 Idle Speed Needle O-Ring (2)

$4.26

This is a pack of two replacement ProTek R/C Samurai 321B, RM.1, RM, CR21 S03 & R03 Idle Screw O-Rings. This o-ring seals the idle screw to the carburetor housing.  

Sold Out

ProTek RC Samurai RM.1, RM, S03, R03 & 321B Carburetor Boot — ProTek RC

ProTek RC Samurai RM.1, RM, S03, R03 & 321B Carburetor Boot

$12.09

This is a replacement ProTek R/C Samurai Carburetor Boot. This rubber boot is installed over the carburetor slide assembly and helps to prevent air leaks, as well as protects the slide from dirt and debris.

Add to Cart

ProTek RC Samurai RM.1, RM, S03 & R03 Mid and High Speed Needle O-Ring (Large) (2) — ProTek RC

ProTek RC Samurai RM.1, RM, S03 & R03 Mid and High Speed Needle O-Ring (Large) (2)

$4.26

This is a pack of two replacement ProTek R/C Large Mid Needle O-Rings for RM.1, RM, 321B, S03 and R03 engines. The Mid Needle requires the use of one large and one small o-ring (PTK-2534) for operation.  

Add to Cart

ProTek RC Samurai RM.1, RM, S03 & R03 Low Speed Needle O-Ring (2) — ProTek RC

ProTek RC Samurai RM.1, RM, S03 & R03 Low Speed Needle O-Ring (2)

$3.39

This is a pack of two replacement ProTek R/C Samurai 321B, RM.1, RM, S03 & R03 Low Speed Needle O-Rings. These o-rings seal the low speed needle and the housing once installed.  

Add to Cart

ProTek RC Samurai RM.1 & RM Low Speed Needle — ProTek RC

ProTek RC Samurai RM.1 & RM Low Speed Needle

$19.04

This is a replacement ProTek R/C Samurai RM.1 & RM, 321B Low Speed Needle, with an included o-ring. The low speed needle is used to regulate the fuel flow in the lower throttle range.    

Add to Cart

ProTek RC 2.6x7mm Samurai RM.1, RM, S03 & R03 Rear Back Plate Screw (10) — ProTek RC

ProTek RC 2.6x7mm Samurai RM.1, RM, S03 & R03 Rear Back Plate Screw (10)

$9.48

This is a pack of ten replacement ProTek R/C Samurai 321B, RM.1, RM, S03 and R03 Rear Back Plate Screws. These screws are 2.6x7mm in size and feature a hex cap head.

Add to Cart

ProTek RC Samurai RM.1, RM, CR21, S03 & R03 Carburetor Outer O-Ring — ProTek RC

ProTek RC Samurai RM.1, RM, CR21, S03 & R03 Carburetor Outer O-Ring

$3.39

This is a replacement ProTek R/C Samurai 321B, RM.1, RM, CR21, S03 & R03 Carburetor Outer O-Ring. This o-ring slides onto the carburetor shaft before sliding the carburetor into the crankcase for installation.

Add to Cart

ProTek RC Samurai RM.1, RM, S03 & R03 Back Plate O-Ring — ProTek RC

ProTek RC Samurai RM.1, RM, S03 & R03 Back Plate O-Ring

$6.87

This is a replacement ProTek R/C Samurai RM.1, RM, S03 and R03 Back Plate O-Ring. 

Add to Cart

ProTek RC 14x25.4x6mm Samurai RM.1, RM, S03 and R03 Ceramic Rear Bearing — ProTek RC

ProTek RC 14x25.4x6mm Samurai RM.1, RM, S03 and R03 Ceramic Rear Bearing

$129.57 $112.17

This is a replacement ProTek R/C 14x25.4x6mm Ceramic Rear Bearing, intended for use with the ProTek R/C Samurai 321B, RM.1, RM, S03 and R03 Nitro Engine. This bearing can also be used with the O.S. VZ-B V-Spec, 30VG, the original Novarossi P5, 421B and...

Add to Cart

ProTek RC 7x19x6mm Samurai RM.1, RM, CR21, S03 and R03 Front Bearing — ProTek RC

ProTek RC 7x19x6mm Samurai RM.1, RM, CR21, S03 and R03 Front Bearing

$38.17

This is a replacement ProTek R/C 7x19x6mm Front Bearing. This bearing is designed to fit the ProTek R/C Samurai 321B, RM.1, RM, S03 and R03 Nitro Engine, but is also compatible with most O.S. .21 engines. This bearing will also fit any other .21...

Add to Cart

ProTek RC Samurai RM.1, RM, S03 & R03 Inner Head Button O-Ring — ProTek RC

ProTek RC Samurai RM.1, RM, S03 & R03 Inner Head Button O-Ring

$8.61

ProTek R/C Samurai RM.1, RM, S03 & R03 Inner Head Button O-Ring. This o-ring is installed in-between crankcase and head button. This helps prevent dirt and debris from entering the combustion chamber. 

Add to Cart

ProTek RC 4-Shoe Clutch Vented Clutch Bell (13T) — ProTek RC

ProTek RC 4-Shoe Clutch Vented Clutch Bell (13T)

$26.87

The ProTek RC 4-Shoe Clutch Bell features hardened steel construction with a vented face to reduce clutch shoe temperatures, creating a more consistent clutch engagement. This clutch bell has a 26.5mm inner diameter, and a 15mm inner bell depth and is...

Add to Cart

ProTek RC Universal Chassis Protective Sheet (California) (2) (12.5x33.5cm) — ProTek RC

ProTek RC Universal Chassis Protective Sheet (California) (2) (12.5x33.5cm)

$22.52

The ProTek RC Universal Uncut "CA" Chassis Protective Sheet is 33.5cm long by 12.5cm wide and designed for universal use. This protective sheet is made from thick laminate and backed by an aggressive adhesive vinyl. Protective sheets are highly...

Add to Cart

ProTek RC N4 Medium Hot Standard Glow Plug (.12, .15 to .28 Engines) (1) — ProTek RC

ProTek RC N4 Medium Hot Standard Glow Plug (.12, .15 to .28 Engines) (1)

$18.70

The ProTek R/C N4 Medium Hot Standard Glow Plug is a great plug option for .12 to .28 size engines used in monster trucks such as the original and newer 2.5 and 3.3 Traxxas T-Maxx trucks. This plug is recommended for slightly warmer ambient temperature...

Add to Cart

ProTek RC N3 Hot Standard Glow Plug (.12, .15 and .18 Engines) — ProTek RC

ProTek RC N3 Hot Standard Glow Plug (.12, .15 and .18 Engines)

$16.43

The ProTek R/C N3 Hot Standard Glow Plug is a great plug option for .12-.15 to .18 size engines used in monster trucks such as the original and newer 2.5 and 3.3 Traxxas T-Maxx trucks. This plug is recommended for hotter/humid conditions and will provide...

Add to Cart

ProTek RC - Dual Offset Heavy Duty Clamping Servo Horn (Standard) (25T) — ProTek RC

ProTek RC - Dual Offset Heavy Duty Clamping Servo Horn (Standard) (25T)

$19.04

The ProTek R/C Dual Offset Heavy Duty Clamping Servo Horn features a dual offset allowing you to choose the best offset for your setup. The 4mm thick horn has a 20mm and 16mm hole spacing threaded for 3mm hardware to suit the geometry and hardware...

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top