Quick view Wishlist Team Associated (D)Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.7mm) $24.80 Team Associated Factory Team Thin 12mm Big Bore Flat Shock Pistons are cut to make them thinner than a standard piston and measure approximately 1.75mm thick. The shocks feature two 1.7mm holes. These thinner shock pistons give you less... Add to Cart
Quick view Wishlist Team Associated Team Associated 1/8" E-Clip (10) $8.30 This is a package of E-clips for use on Associated hinge pins and axles. Sold Out
Quick view Wishlist Team Associated Team Associated 10mm Factory Team Heavy Duty Titanium Ball Stud Set (2) $29.80 Team Associated 10mm Factory Team Heavy Duty Titanium Ball Stud Set. This optional ball stud can be used in place of TA10-91049. In the B6 and B6D model this ball stud is used in the rear axle carrier, front inner camber link mount, c-hub steering rack,... Add to Cart
Quick view Wishlist Team Associated Team Associated 10mm Heavy Duty Ballstud Set (8) $36.90 This is a replacement Team Associated 10mm Heavy Duty Ballstud Set, and is intended for use with the Associated SC10 4x4, B5 and B5M vehicles. Add to Cart
Quick view Wishlist Team Associated Team Associated 10x15x4mm Factory Team Bearing (4) $17.90 This is a pack of four Team Associated 10x15x4mm Factory Team Bearings. Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Big Bore Threaded Collar (Blue) (2) $16.60 This is a pack of two replacement Team Associated Threaded Collars, and are intended for use with the Team Associated line of 1/10 scale vehicles equipped with the optional 12mm Big Bore Shock Set. This package also includes two o-rings. Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Factory Team V2 Flat Shock Piston (2x1.7mm) (4) $29.80 This is a pack of four optional Team Associated Factory Team V2 Flat Mount Shock Piston. These flat pistons feature two 1.7mm holes and are for use with 12mm shocks. Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Front Shock Spring (2) (Blue/3.90lbs) (44mm long) $12.50 This is a pack of 12mm Big Bore Team Associated Front Shock Springs, rated at 3.90lbs. These springs are identified as Blue for easy identification, and are intended for use on the front of the B6.1 and B6.1D. Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Front Shock Spring (2) (Gray/3.60lbs) (44mm long) $12.50 This is a pack of 12mm Big Bore Team Associated Front Shock Springs, rated at 3.60lbs. These springs are identified as Gray for easy identification, and are intended for use on the front of the B6.1 and B6.1D. Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Front Shock Spring (2) (Green/3.10lbs) (44mm long) $12.50 This is a pack of two optional Team Associated 12mm Front Shock Springs. These springs are rated 3.10lbs and are colored green for easy identification. These springs are 44mm long. Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Front Shock Spring (2) (Orange/5.10lbs) (44mm Long) $12.50 This is a pack of two Team Associated 12mm Front Shock Springs. These front shock springs are 44mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification. Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Front Shock Spring (2) (Red/4.60lbs) (44mm Long) $12.50 This is a pack of two Team Associated 12mm Front Shock Springs. These front shock springs are 44mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification. Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Front Shock Spring (2) (White/3.40lbs) (44mm Long) $12.50 This is a pack of two Team Associated 12mm Front Shock Springs. These front shock springs are 44mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification. Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Front Shock Spring (2) (Yellow/4.30lbs) (44mm Long) $12.50 This is a pack of two Team Associated 12mm Front Shock Springs. These front shock springs are 44mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification. Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Hex 2.2 Front Buggy Wheels (2) (B6) (White) $14.90 This is a set of two optional Team Associated 2.2 1/10 buggy front wheels with a 12mm hex. Use these for your front wheels for 2wd offroad buggies on dirt Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Hex 2.2 Front Buggy Wheels (2) (B6) (Yellow) $14.90 This is a set of two optional Team Associated 2.2 1/10 buggy front wheels with a 12mm hex. Use these for your front wheels for 2wd offroad buggies on dirt Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Hex 2.2 Rear Hex Wheels (2) (B6/B64) (White) $16.90 This is a pair of Team Associated 2.2" Rear Hex Wheels, and are intended for use with the Team Associated B4.1 1/10 scale buggy equipped with the optional 12mm Hexes. These hex wheels will also work with the Team Losi Racing 22, Kyosho RB5 buggy and any... Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Hex 2.2 Rear Hex Wheels (2) (B6/B64) (Yellow) $16.90 This is a pair of Team Associated 2.2" Rear Hex Wheels, and are intended for use with the Team Associated B4.1 1/10 scale buggy equipped with the optional 12mm Hexes. These hex wheels will also work with the Team Losi Racing 22, Kyosho RB5 buggy and any... Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Rear Shock Spring (2) (Blue/2.20lbs) (61mm Long) $13.90 This is a pack of two Team Associated 12mm Rear Shock Springs. These rear shock springs are 61mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification. Sold Out
Quick view Wishlist Team Associated Team Associated 12mm Rear Shock Spring (2) (Gray/2.0lbs) (61mm Long) $13.90 This is a pack of 12mm Big Bore Team Associated Rear Shock Springs, rated at 2.0lbs. These springs are identified as Gray for easy identification, and are intended for use on the rear of the B6.1 and B6.1D. Sold Out
Quick view Wishlist Team Associated Team Associated 12mm Rear Shock Spring (2) (White/1.90lbs) (61mm Long) $13.90 This is a pack of two Team Associated 12mm Rear Shock Springs. These rear shock springs are 61mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated for easy identification. Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Rear Shock Spring (2) (Yellow/2.30lbs) (61mm Long) $13.90 This is a pack of 12mm Big Bore Team Associated Rear Shock Springs, rated at 2.3lbs. These springs are identified as Yellow for easy identification, and are intended for use on the rear of the B6.1 and B6.1D. Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm Shock Collar & Seal Retainer Set (Black) $26.50 Team Associated 12mm Shock Collar & Seal Retainer Set. Package includes optional shock spring pre-load collars, lower shock caps and o-rings. These are compatible with the B6.1, B6.2, B6.3 SC6.1, SC6.2, T6.1 and T6.2 models. Add to Cart
Quick view Wishlist Team Associated Team Associated 12mm V2 Big Bore Shock Rebuild Kit $19.90 This is a replacement Team Associated 12mm V2 Shock Rebuild Kit. This kit is compatible with the B44.3, B5, B5M and T5M models. Contents: (12) V2 Shock Hat Bushing (8) Red O-Ring (4) Shock Cap O-Ring Sold Out
Quick view Wishlist Team Associated Team Associated 12mm V2 X-Ring Rebuild Kit $29.80 This is an optional Team Associated 12mm V2 X-Ring Rebuild Kit. Package includes eight x-ring type shock seals, and all the necessary shaft guides for four shocks. Add to Cart
Quick view Wishlist Team Associated Team Associated 15.5mm Aluminum FT Clamping Servo Horn (23T-JR/Airtronics/KO)R $29.80 This is the Team Associated Factory Team 15.5mm 25 Tooth Aluminum Clamping Servo Horn. Made for 6-series off-road vehicles, this 7075-T6 aluminum clamping servo horn comes with a large M2.5 screw and laser-etched spline size for positive identification... Add to Cart
Quick view Wishlist Team Associated Team Associated 15.5mm Aluminum FT Clamping Servo Horn (25T-Futaba/Savox/ProTek) $31.50 This is the Team Associated Factory Team 15.5mm 25 Tooth Aluminum Clamping Servo Horn. Made for 6-series off-road vehicles, this 7075-T6 aluminum clamping servo horn comes with a large M2.5 screw and laser-etched spline size for positive identification... Add to Cart
Quick view Wishlist Team Associated Team Associated 3/32" Carbide Diff Balls (14) $22.50 This is a pack of 14 optional 3/32" carbide differential balls for Team Associated cars and trucks. These will also work with any other vehicle that requires 3/32" differential balls. Add to Cart
Quick view Wishlist Team Associated Team Associated 3x21mm V2 Chrome Screw Mount Buggy Front Shock Shaft (2) $31.50 This is a pack of two Team Associated 3x21mm V2 Chrome Screw Mount Buggy Front Shock Shafts. These shafts use a screw to hold the piston in place and a chrome coating for the smoothest action. NOTE: These screw-mounted shafts are not compatible with... Add to Cart
Quick view Wishlist Team Associated Team Associated 3x21mm V2 Ti-Nitride Screw Mount Buggy Front Shock Shaft (2) $19.90 This is a pack of two Team Associated 3x21mm V2 Ti-Nitride Screw Mount Buggy Front Shock Shafts. These shafts use a screw to hold the piston in place and a Ti-Nitride coating for long life. NOTE: These screw-mounted shafts are not... Add to Cart
Quick view Wishlist Team Associated Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft (2) $32.90 Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft. These are compatible with the B64D and B6 vehicles. Package includes two shock shafts and hardware. Add to Cart
Quick view Wishlist Team Associated Team Associated 3x23mm V2 Ti-Nitride Screw Mount Front Shock Shaft (2) $21.50 Team Associated 3x23mm V2 Ti-Nitride Screw Mount Front Shock Shaft. These are compatible with the B74.1, B64D and B6 vehicles. Package includes two shock shafts and hardware. Sold Out
Quick view Wishlist Team Associated Team Associated 3x27.5mm V2 Chrome Screw Mount Shock Shaft (2) $31.50 This is a pack of two Team Associated 3x27.5mm V2 Chrome Screw Mount Shock Shafts. These shafts use a screw to hold the piston in place and a Chrome coating for the smoothest action. These are used with the TA10-91577 buggy rear shock bodies, as well as... Add to Cart
Quick view Wishlist Team Associated Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shaft (2) $28.90 This is a pack of two Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts. These shafts use a screw to hold the piston in place and a Ti-Nitride coating for long life. These are used with the 91577 buggy rear shock bodies, as well as with the... Add to Cart
Quick view Wishlist Team Associated Team Associated 3x48mm Turnbuckles (2) $15.90 This is a pack of two replacement Team Associated 3x48mm Turnbuckles. These are used as steering turnbuckles on the B6 and B6D vehicles. Add to Cart
Quick view Wishlist Team Associated Team Associated 3x7x3mm Ball Bearing (8) $35.90 This is a pack of eight replacement Team Associated 3x7x3mm Ball Bearings. These bearings are used in the steering rack and steering bellcranks. Add to Cart
Quick view Wishlist Team Associated Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set (2) $29.80 Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set. Package includes two ball studs. Add to Cart
Quick view Wishlist Team Associated Team Associated 5.5x0.5mm Aluminum Ball Stud Washer (Blue) (10) $16.60 This is a pack of ten Team Associated 5.5x0.5mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications. These small outside diameter shims, common for on-road, are now available... Add to Cart
Quick view Wishlist Team Associated Team Associated 5.5x1.0mm Aluminum Ball Stud Washer (Blue) (10) $17.90 This is a pack of ten Team Associated 5.5x1.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications. These small outside diameter shims, common for on-road, are now available... Add to Cart
Quick view Wishlist Team Associated Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10) $17.90 This is a pack of ten Team Associated 5.5x2.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications. These small outside diameter shims, common for on-road, are now available separately... Add to Cart
