RC10 Vintage

Replacement and option parts for the RC10 vintage vehicles. Please double check the part number in your manual to confirm compatibility. If in doubt don't hesitate to contact us for advice.

(D)Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.7mm) — Team Associated

(D)Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.7mm)

$21.57

Team Associated Factory Team Thin 12mm Big Bore Flat Shock Pistons are cut to make them thinner than a standard piston and measure approximately 1.75mm thick. The shocks feature two 1.7mm holes.    These thinner shock pistons give you less...

Add to Cart

Team Associated .15S Nitro Engine w/Rotary Carb & Side Exhaust — Team Associated

Team Associated .15S Nitro Engine w/Rotary Carb & Side Exhaust

$338.26 $260.00

Team Associated .15S engine. This engine is intended for use with the Team Associated RC10GT. Vintage FunThe Team Associated Small Block Nitro Engine is the perfect power upgrade for your RC10GT and other vintage nitro platforms. Designed for...

Add to Cart

Team Associated 12mm Factory Team V2 Flat Shock Piston (2x1.7mm) (4) — Team Associated

Team Associated 12mm Factory Team V2 Flat Shock Piston (2x1.7mm) (4)

$25.91

This is a pack of four optional Team Associated Factory Team V2 Flat Mount Shock Piston. These flat pistons feature two 1.7mm holes and are for use with 12mm shocks.  

Add to Cart

Team Associated 12mm FT V2 Flat Mount Shock Piston (4) (2x1.5mm) — Team Associated

Team Associated 12mm FT V2 Flat Mount Shock Piston (4) (2x1.5mm)

$25.91

This is a pack of four Team Associated Factory Team 12mm FT V2 Flat Mount Shock Pistons. These pistons features two 1.5mm holes.   

Add to Cart

Team Associated 3/16 x 3/8 Bearing (2) — Team Associated

Team Associated 3/16 x 3/8 Bearing (2)

$11.74

Team Associated 3/16 x 3/8 Bearings (2) 3/16X3/8 Rubber Sealed Bearings (2)

Sold Out

Team Associated 3/16x5/16" Flanged Bearings (2) — Team Associated

Team Associated 3/16x5/16" Flanged Bearings (2)

$12.09

Team Associated 3/16x5/16" Flanged Bearings (2) Imperial size bearings for use in various vintage Team Associated kits  

Add to Cart

Team Associated 3/16x5/16x3/64 RC10GT Driveshaft Spacers (6) — Team Associated

Team Associated 3/16x5/16x3/64 RC10GT Driveshaft Spacers (6)

$26.00

Team Associated RC10GT Driveshaft Spacer. This is a replacement set of spacers intended for the RC10GT.

Add to Cart

Team Associated 4-40 Nylon Locknuts — Team Associated

Team Associated 4-40 Nylon Locknuts

$9.13

Team Associated 4-40 Nylon Locknuts The Team Associated 4-40 Nylon Locknuts are high-quality fasteners designed to provide secure, vibration-resistant mounting for various RC applications. Featuring a nylon insert, these locknuts prevent loosening under...

Sold Out

Team Associated 5.5x0.5mm Aluminum Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 5.5x0.5mm Aluminum Ball Stud Washer (Blue) (10)

$14.43

This is a pack of ten Team Associated 5.5x0.5mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications.    These small outside diameter shims, common for on-road, are now available...

Add to Cart

Team Associated 5.5x1.0mm Aluminum Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 5.5x1.0mm Aluminum Ball Stud Washer (Blue) (10)

$15.57

This is a pack of ten Team Associated 5.5x1.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications. These small outside diameter shims, common for on-road, are now available separately...

Add to Cart

Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10)

$15.57

This is a pack of ten Team Associated 5.5x2.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications. These small outside diameter shims, common for on-road, are now available separately...

Add to Cart

Team Associated 7.8x0.5mm Aluminum Bulkhead Washer (Blue) (10) — Team Associated

Team Associated 7.8x0.5mm Aluminum Bulkhead Washer (Blue) (10)

$15.57

This is a ten pack of Team Associated 0.5mm Thick Aluminum Bulkhead Washers. These washers are made from aluminum alloy material and anodized blue. Great for all 1:10 scale vehicles  

Add to Cart

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washer (Blue) (10)

$15.57

This is a pack of ten Team Associated 7.8x1.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications. These large outside diameter shims, common for off-road and bulkhead/arm mount shimming in...

Add to Cart

Team Associated 7.8x2.0mm Aluminum Bulkhead Washer (Blue) (10) — Team Associated

Team Associated 7.8x2.0mm Aluminum Bulkhead Washer (Blue) (10)

$15.57

This is a ten pack of Team Associated 2.0mm Thick Aluminum Bulkhead Washers. These washers are made from aluminum alloy material and anodized blue. Great for all 1:10 scale vehicles.

Add to Cart

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washer (Blue) (10)

$14.70

This is an optional Team Associated Blue 7.8x3.5x0.5mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washer (Blue) (10)

$15.57

This is an optional Team Associated Blue 7.8x3.5x1.0mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washer (Blue) (10)

$15.57

This is an optional Team Associated Blue 7.8x3.5x2.0mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Team Associated AE Branding Decal Sheet — Team Associated

Team Associated AE Branding Decal Sheet

$11.22

Team Associated AE Branding Decal Sheet. This decal sheet features many brandings Team Associated is known for. Package includes one decal sheet.

Add to Cart

Team Associated Aluminum Servo Washers (Black) — Team Associated

Team Associated Aluminum Servo Washers (Black)

$11.57

Team Associated Aluminum Servo Washers. Gain more secure servo mounting with these aluminum servo washers. They preserve the structural integrity of the servo ears. Package includes four washers. Features: Machined from aluminum and anodized...

Sold Out

Team Associated Bearings 5/32 x 5/16 x .125 — Team Associated

Team Associated Bearings 5/32 x 5/16 x .125

$14.70

Team Associated Bearings 5/32 x 5/16 x .125 Imperial size bearings for use in various vintage Team Associated kits  

Sold Out

Team Associated Differential Thrust Spring — Team Associated

Team Associated Differential Thrust Spring

$7.39

This is a replacement differential thrust spring from Team Associated. This spring mounts on the differential thrust bolt.

Add to Cart

Team Associated Differential Thrust Washers & Bolt — Team Associated

Team Associated Differential Thrust Washers & Bolt

$11.74

Team Associated Differential Thrust Washers & Bolt This is a replacement set of differential thrust washers and bolt from Team Associated. This bolt and washers are used to hold the rear ball differential together, and to make adjustments to...

Add to Cart

Team Associated Factory Team "V2" Slipper Hub Set — Team Associated

Team Associated Factory Team "V2" Slipper Hub Set

$25.13

Team Associated Factory Team "V2" Slipper Hub Set This is a optional Team Associated Factory Team "V2" Slipper Hub Set, and is intended for use with the Associated B4, B4.1, B44, T4, T4.1 and SC10 1/10 vehicles.   

Add to Cart

Team Associated Factory Team 1/4 oz. Chassis Weights (2oz) — Team Associated

Team Associated Factory Team 1/4 oz. Chassis Weights (2oz)

$9.48

This is a pack of self stick chassis weights from Team Associated. These self stick weights can be used to balance your chassis. Package includes a total of 2oz of weight.

Add to Cart

Team Associated Factory Team 12mm V2 2mm Shock Piston (4) (2x1.5mm) — Team Associated

Team Associated Factory Team 12mm V2 2mm Shock Piston (4) (2x1.5mm)

$25.91

Team Associated Factory Team 12mm V2 2mm Shock Pistons are a great tuning option for 12mm off-road shocks. The 2mm thickness V2 shock pistons decrease damping and pack compared to the standard 2.5mm thickness kit pistons. Keeping the same 2-hole valving,...

Add to Cart

Team Associated Factory Team 12mm V2 2mm Shock Piston (4) (2x1.6mm) — Team Associated

Team Associated Factory Team 12mm V2 2mm Shock Piston (4) (2x1.6mm)

$25.91

Team Associated Factory Team 12mm V2 2mm Shock Pistons are a great tuning option for 12mm off-road shocks. The 2mm thickness V2 shock pistons decrease damping and pack compared to the standard 2.5mm thickness kit pistons. Keeping the same 2-hole valving,...

Add to Cart

Team Associated Factory Team 12mm V2 2mm Shock Piston (4) (2x1.7mm) — Team Associated

Team Associated Factory Team 12mm V2 2mm Shock Piston (4) (2x1.7mm)

$25.91

Team Associated Factory Team 12mm V2 2mm Shock Pistons are a great tuning option for 12mm off-road shocks. The 2mm thickness V2 shock pistons decrease damping and pack compared to the standard 2.5mm thickness kit pistons. Keeping the same 2-hole valving,...

Add to Cart

Team Associated Factory Team Body Clips (Blue) — Team Associated

Team Associated Factory Team Body Clips (Blue)

$8.17

This is a pack of six replacement Factory Team short blue body clips from Team Associated.

Add to Cart

Team Associated Factory Team PTFE 3/8x5/8" Bearings (2) — Team Associated

Team Associated Factory Team PTFE 3/8x5/8" Bearings (2)

$14.70

Team Associated Factory Team PTFE 3/8x5/8" Bearings (2) This is a set of two replacement 3/8 x 5/8" ball bearings for the Team Associated RC10GT2, SC10, RC10T4, RC10B4 and B44 1/10th scale off-road vehicles. These bearings are Teflon sealed for low...

Add to Cart

Team Associated Factory Team PTFE Bearings 3/16x3/8" Sealed (2) — Team Associated

Team Associated Factory Team PTFE Bearings 3/16x3/8" Sealed (2)

$22.52

Team Associated Factory Team PTFE Bearings 3/16x3/8" Sealed (2) Upgraded Imperial size bearings for use in various vintage Team Associated kits

Add to Cart

Team Associated Factory Team RC10 CVA 12mm Hex Conversion Kit — Team Associated

Team Associated Factory Team RC10 CVA 12mm Hex Conversion Kit

$110.87

Team Associated Factory Team RC10 CVA 12mm Hex Conversion Kit This kit allows RC10 vintage vehicles to be converted to use 12mm hex to suit modern style wheels

Add to Cart

Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.6mm) — Team Associated

Team Associated Factory Team Thin 12mm Big Bore Flat Shock Piston Set (2x1.6mm)

$21.57

Team Associated Factory Team Thin 12mm Big Bore Flat Shock Pistons are cut to make them thinner than a standard piston and measure approximately 1.75mm thick.    These thinner shock pistons give you less "pack" inside the 12mm shock. Terrific...

Add to Cart

Team Associated Factory Team V2 Flat Mount Shock Piston (2x1.6mm)(4) — Team Associated

Team Associated Factory Team V2 Flat Mount Shock Piston (2x1.6mm)(4)

$25.91

This is a pack of four Team Associated Factory Team 12mm Big Bore V2 Flat Screw Mount Shock Pistons, with two 1.6mm holes. These pistons have been machined to provide a precision fit and finish. The edges have been radiused for smooth shock action...

Add to Cart

Team Associated Factory Team V2 Flat Mount Shock Piston Set (3x1.4mm)(4) — Team Associated

Team Associated Factory Team V2 Flat Mount Shock Piston Set (3x1.4mm)(4)

$25.91

This is a pack of four Team Associated Factory Team 12mm Big Bore V2 Flat Screw Mount Shock Pistons, with three 1.4mm holes. These pistons have been machined to provide a precision fit and finish. The edges have been radiused for smooth shock action...

Add to Cart

Team Associated Factory Team V2 Flat Mount Shock Piston Set (Blank)(4) — Team Associated

Team Associated Factory Team V2 Flat Mount Shock Piston Set (Blank)(4)

$25.91

This is a pack of four Team Associated Factory Team 12mm Big Bore V2 Flat Screw Mount Shock Pistons. These pistons are left blank so you can drill your own holes and create your own custom piston valving, and the factory machined dimples allow you to...

Add to Cart

Team Associated Factory Team V2 Tapered Mount Shock Piston Set (3x1.4mm)(4) — Team Associated

Team Associated Factory Team V2 Tapered Mount Shock Piston Set (3x1.4mm)(4)

$21.57

This is a pack of four Team Associated Factory Team 12mm Big Bore V2 Tapered Screw Mount Shock Pistons, with three 1.4mm holes. These pistons have been machined to provide a precision fit and finish, and feature a tapered profile that allows you to alter...

Add to Cart

Team Associated Factory Team V2 Tapered Mount Shock Piston Set (Blank)(4) — Team Associated

Team Associated Factory Team V2 Tapered Mount Shock Piston Set (Blank)(4)

$21.57

This is a pack of four Team Associated Factory Team 12mm Big Bore V2 Tapered Screw Mount Shock Pistons. These pistons are left blank so you can drill your own holes and create your own custom piston valving, and the factory machined dimples allow you to...

Add to Cart

Team Associated Front Spring/Macro Springs (Blue 4.20 lb/in) — Team Associated

Team Associated Front Spring/Macro Springs (Blue 4.20 lb/in)

$12.09

Team Associated Front Spring/Macro Springs (Blue 4.20 lb/in) This is a set of Blue Front Springs intended for use with the Team Associated vintage RC10 series.  

Add to Cart

Team Associated FT Titanium Turnbuckles, 33 mm/1.30 in — Team Associated

Team Associated FT Titanium Turnbuckles, 33 mm/1.30 in

$23.04

This is a set of two optional Factory Team 1.30"/33mm titanium turnbuckles from Team Associated. These turnbuckles are used for the steering linkage.

Add to Cart

Team Associated Medium Body Clips (10) — Team Associated

Team Associated Medium Body Clips (10)

$7.74

Team Associated Medium Body Clips (10) These Medium size body clips are intended for 1/12 and 1/10 scale vehicles. Check the below body clip size comparison chart Body Clip Comparison Chart

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top