Schumacher CAT PB-M 1/10 4WD Off-Road Buggy Kit (Mod Spec)

Description
Review
Custom Product Tab

Schumacher CAT PB-M 1/10 4WD Off-Road Buggy Kit (Mod Spec)

Introducing the all new CAT PB 1/10th 4WD Off Roader.

Named in honour of the late Phil Booth, Chief Schumacher Designer and former IFMAR World Champion, the Schumacher CAT PB is here to redefine 4WD performance. Built with precision and passion, the CAT PB combines modern engineering with legendary heritage to deliver elite level performance straight out of the box.

At its core, the CAT PB features a shaft-driven 4WD system, delivering explosive acceleration, awesome efficiency, and rock-solid reliability across all surfaces. Refined suspension geometry, enhanced drivetrain dynamics, and a low centre of gravity layout provide razor-sharp handling, making the CAT PB not only blisteringly fast but also remarkably easy to drive, even at the limit. Designed with the racer in mind, the CAT PB also boasts intuitive access and simplified assembly features, making routine maintenance quicker and easier than ever, so you spend less time wrenching and more time winning.

Wrapped in an aggressive, aerodynamic shell from JConcepts and built with race-hardened materials, the CAT PB delivers raw speed, unshakable stability, and the confidence to lead from the front. Drive the CAT PB.

All New Car Design
New – (DIRT Spec) Shaft drive system for simplicity and durability with 3 differentials to distribute power more efficiently on low grip tracks. Includes CVD rear Driveshafts and U/J front.
New – (MOD Spec) Shaft drive system for simplicity and durability with 2 differentials to distribute power plus a FAB (Front Adjustable Brake) unit/Slipper to improve heavy breaking on higher grip surfaces like carpet and astro. Includes U/J Driveshafts front and rear.
New – Oil filled small diameter differential design with gasket seal for superior sealing, light weight and durable outputs. Small but with great capacity and low centre of gravity.
New – 80T simple to fit spur gear.
New – Diff height eccentrics with 5 settings to optimise for all grip levels and handling requirements.
New – Fast access transmission housings for speedy differential adjustments.
New – Front & rear U/J (Universal joint) driveshaft’s for durability as well as great bump handling.
New – Stronger front hub carrier bearing assembly.
New – Motor mount and layshaft mount alloy housings, with a laser etched fine graduation scale eccentric adjustment for consistent and easy pinion to spur meshing.
New – Long front wishbone design with moulded anti roll bar ball. Durable large span inner hinge pin bosses for better impact strength.
New – Rear wishbone for improved flex.
New – Suspension pills/inserts for track width, roll centre, toe and anti-squat adjustment. This Increases versatility of setting adjustment as it will allow a multitude of positions suiting all conditions.
New – Front and rear suspension straps/blocks, strong and simple to work on.
New – Rear hinge pins, strong and durable.
New – Rear hub carrier with 7 adjustable heights to tune the wheel stiffness. The camber plate has multiple camber adjustments.
New – Anti roll bar fitment with easier fitment and matching front and rear anti roll bars.
New – S2 4mm shock towers with angle adjustment and camber link positioning to meet all handling requirements.
New – Light weight front bumper design for reduced over hanging weight and material and improve responsiveness of the car. The minimal front bumper offers more clearance on small radius kick up jumps.
New – 7075- T6 2mm aluminium chassis hard anodised, this chassis is durable, light and narrow keeping the weight inboard.
New – Composite side-pods for chassis sealing from dirt ingress and chassis stiffening.
New – Composite centre braces with Carbon fibre top braces for tuneable chassis stiffness.
New – Two point angled mounting servo assembly, for lower centre of gravity, easy access, and direct steering response.
New – Steering centre track assembly, geometry derived from our L1R Recon system. Precise, adjustable and durable.
New – Speed control carbon fibre tray for easier removal.
New – 3 position lipo mounting with angled fit for lower centre of gravity. Quick and secure lipo fitment.
New – Pre drilled tapered shock pistons included.
New – Jconcepts S2 body, for great styling. A perfect design for all conditions.
AX037 - Aerox Trident 6.5” wing 1.0mm.

Write a Review

Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.