T4 series (T4, T4e)

Replacement and upgrade/option parts for the Team Associated RC8 T4 series of 1/8 Offroad Truggies. Please double check the part number in your manual to ensure compatibility. If in doubt don't hesitate to contact us for advise.

(D) Team Associated 15x21x4mm Factory Team Bearings (2) — Team Associated

(D) Team Associated 15x21x4mm Factory Team Bearings (2)

$15.13

This is a pack of two replacement Team Associated 15x21x4mm Factory Team Bearings.

Add to Cart

(D) Team Associated Aluminum RC8B3.1 Shock Bushings (4) — Team Associated

(D) Team Associated Aluminum RC8B3.1 Shock Bushings (4)

$27.39

This is a pack of four Team Associated Aluminum RC8B3.1 Shock Bushings.

Add to Cart

(D) Team Associated Factory Team Adjustable Clutch Flywheel & Spring Cam — Team Associated

(D) Team Associated Factory Team Adjustable Clutch Flywheel & Spring Cam

$91.74

The Team Associated Factory Team Adjustable Clutch Flywheel & Spring Cam allows you to adjust the tension of the clutch springs - without having to remove the clutch and change springs. In fact, the engine doesn't even need to be removed from the...

Add to Cart

(D) Team Associated RC8B3 Factory Team Rigid Engine Mount — Team Associated

(D) Team Associated RC8B3 Factory Team Rigid Engine Mount

$55.39

The Team Associated RC8B3 Factory Team Rigid Engine Mount reduce chassis flex and extend clutch bell and spur gear life. This extended engine mount restricts the clutch bell and spur gear area from flexing, saving tooth wear and ensuring more consistent...

Add to Cart

(D) Team Associated RC8B3 FT V2 Rear Hubs — Team Associated

(D) Team Associated RC8B3 FT V2 Rear Hubs

$168.17 $129.57

New optional V2 rear hubs are a great tuning and performance upgrade for your buggy or truggy. The blue anodized aluminum hubs are CNC machined and utilize plastic inserts to achieve a perfect bearing fit. Molded axle height inserts allow three different...

Add to Cart

Element RC Enduro Receiver Box Seals — Element RC

Element RC Enduro Receiver Box Seals

$12.96

This is a replacement set of Element RC Receiver Box Seals, intended for use with the Element Enduro Sendero.   Includes: (1) Receiver Box Grommet (1) Receiver Box Grommet Plug (1) Receiver Box Gasket

Add to Cart

Team Associated - RC8T4/RC8T4e V2 Aluminum Front Shock Tower w/ 48mm Hinge Pins — Team Associated

Team Associated - RC8T4/RC8T4e V2 Aluminum Front Shock Tower w/ 48mm Hinge Pins

$69.13

Team Associated RC8T4/RC8T4e Aluminum Front Shock Tower. This is an optional front shock tower intended for the RC8T4/RC8T4e. This V2 tower is more durable than the stock tower and features a 1mm pocket to capture the front upper suspension insert along...

Add to Cart

Team Associated 0.85mm 4-Shoe Clutch Springs (4) — Team Associated

Team Associated 0.85mm 4-Shoe Clutch Springs (4)

$12.96

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs.

Add to Cart

Team Associated 0.90mm 4-Shoe Clutch Springs (4) — Team Associated

Team Associated 0.90mm 4-Shoe Clutch Springs (4)

$12.96

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs.

Add to Cart

Team Associated 0.95mm 4-Shoe Clutch Springs (4) — Team Associated

Team Associated 0.95mm 4-Shoe Clutch Springs (4)

$12.96

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs.

Add to Cart

Team Associated 1.00mm 4-Shoe Clutch Springs (4) — Team Associated

Team Associated 1.00mm 4-Shoe Clutch Springs (4)

$12.96

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs.

Add to Cart

Team Associated 1.05mm 4-Shoe Clutch Springs (4) — Team Associated

Team Associated 1.05mm 4-Shoe Clutch Springs (4)

$12.96

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs.

Add to Cart

Team Associated 1.10mm 4-Shoe Clutch Springs (4) — Team Associated

Team Associated 1.10mm 4-Shoe Clutch Springs (4)

$12.96

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs.

Add to Cart

Team Associated 1/8 Rear Springs V2 - Black - 3.9 lb/in, L86, 11.50T, 1.6D — Team Associated

Team Associated 1/8 Rear Springs V2 - Black - 3.9 lb/in, L86, 11.50T, 1.6D

$15.22

Rear Springs V2, black, 3.9 lb/in, L86, 11.50T, 1.6D To work on the RC8B3 and RC8B3e Big Bore 1:8 shocks, these springs require the TA8-81221 Spring Collars and TA8-81194 Spring Cups. (These spring collars and cups are included with the RC8 B3.1, B3.1e,...

Add to Cart

Team Associated 1/8 Rear Springs V2 - Brown - 3.8 lb/in, L86, 11.75T, 1.6D — Team Associated

Team Associated 1/8 Rear Springs V2 - Brown - 3.8 lb/in, L86, 11.75T, 1.6D

$15.22

Rear Springs V2, brown, 3.8 lb/in, L86, 11.75T, 1.6D To work on the RC8B3 and RC8B3e Big Bore 1:8 shocks, these springs require the TA8-81221 Spring Collars and TA8-81194 Spring Cups. (These spring collars and cups are included with the RC8 B3.1, B3.1e,...

Sold Out

Team Associated 1/8 Rear Springs V2 - Green - 4.0 lb/in, L86, 11.25T, 1.6D — Team Associated

Team Associated 1/8 Rear Springs V2 - Green - 4.0 lb/in, L86, 11.25T, 1.6D

$15.22

Rear Springs V2, green, 4.0 lb/in, L86, 11.25T, 1.6D To work on the RC8B3 and RC8B3e Big Bore 1:8 shocks, these springs require the TA8-81221 Spring Collars and TA8-81194 Spring Cups. (These spring collars and cups are included with the RC8 B3.1, B3.1e,...

Add to Cart

Team Associated 1/8 Rear Springs V2 - Pink - 3.7 lb/in, L86, 12.00T, 1.6D — Team Associated

Team Associated 1/8 Rear Springs V2 - Pink - 3.7 lb/in, L86, 12.00T, 1.6D

$15.22

Rear Springs V2, pink, 3.7 lb/in, L86, 12.00T, 1.6D To work on the RC8B3 and RC8B3e Big Bore 1:8 shocks, these springs require the TA8-81221 Spring Collars and TA8-81194 Spring Cups. (These spring collars and cups are included with the RC8 B3.1, B3.1e,...

Add to Cart

Team Associated 12mm V2 Shock Cap Bleeder Screw & Gasket Set — Team Associated

Team Associated 12mm V2 Shock Cap Bleeder Screw & Gasket Set

$4.78

This is a replacement Team Associated 12mm V2 Shock Cap Bleeder Screw & Gasket Set. Package includes two screws and two gaskets.

Add to Cart

Team Associated 133mm RC8T3 CVA Bone Driveshaft (2) — Team Associated

Team Associated 133mm RC8T3 CVA Bone Driveshaft (2)

$60.78

This is a pack of two replacement Team Associated 133mm RC8T3 CVA Bone Driveshafts, for use with the Team Associated CVA Set, part TA8-81335

Add to Cart

Team Associated 15mm Differential Outdrive (2) — Team Associated

Team Associated 15mm Differential Outdrive (2)

$30.35

This is a pack of two replacement Team Associated Differential Outdrives, intended for use with the Team Associated RC8B3 Nitro Buggy.   

Add to Cart

Team Associated 15x21x4mm Factory Team Bearings (4) — Team Associated

Team Associated 15x21x4mm Factory Team Bearings (4)

$25.91

This is a pack of four replacement Team Associated 15x21x4mm Factory Team Bearings.

Add to Cart

Team Associated 16mm Bleeder Shock Cap (2) — Team Associated

Team Associated 16mm Bleeder Shock Cap (2)

$12.78

This is a pack of two optional Team Associated 16mm Bleeder Shock Caps. When used in combination, the bleeder shock caps and bleeder shock cap seals (sold separately) give drivers the ability to run emulsion-style shocks. Perfect for tracks with large...

Add to Cart

Team Associated 16mm Bleeder Shock Cap Seal (4) — Team Associated

Team Associated 16mm Bleeder Shock Cap Seal (4)

$9.13

This is a pack of four optional Team Associated 16mm Bleeder Shock Cap Seals. When used in combination, the bleeder shock caps (sold separately) and bleeder shock cap seals give drivers the ability to run emulsion-style shocks. Perfect for tracks with...

Add to Cart

Team Associated 17mm Aluminum Serrated Wheel Hex Nut (Blue) (2) — Team Associated

Team Associated 17mm Aluminum Serrated Wheel Hex Nut (Blue) (2)

$26.00

This is a pack of two replacement Team Associated 17mm Aluminum Serrated Wheel Nut Hexes, intended for use with the Team Associated RC8B3.

Add to Cart

Team Associated 17mm Differential Outdrive (2) — Team Associated

Team Associated 17mm Differential Outdrive (2)

$30.35

This is a pack of two optional Team Associated 17mm Differential Outdrives. These are used on the front of the RC8B3.1, where as the rear uses the 15mm Outdrives (TA8-81008).  

Add to Cart

Team Associated 2.6x6mm Washers (20) — Team Associated

Team Associated 2.6x6mm Washers (20)

$8.26

This is a pack of twenty replacement Team Associated 2.6x6mm Washers

Add to Cart

Team Associated 20mm Aluminum Spring Collars (2) — Team Associated

Team Associated 20mm Aluminum Spring Collars (2)

$12.96

This is an optional pair of Team Associated 20mm Spring Collars. 20mm shock rod ends, spring cups, and collars allow a wider variety of 20mm sized springs that can be used, providing drivers with more options for fine tuning their vehicle. Optional 20mm...

Add to Cart

Team Associated 3.5x35.5mm TiN Front Shock Shafts (2) — Team Associated

Team Associated 3.5x35.5mm TiN Front Shock Shafts (2)

$25.91

Team Associated 3.5x35.5mm TiN Front Shock Shafts. These are replacement shock shafts intended for the Team Associated RC8T4 and RC8T4e vehicles. Package includes two 3.5x35.5mm TiN front shock shafts.

Sold Out

Team Associated 3.5x44.5mm TiN Rear Shock Shafts — Team Associated

Team Associated 3.5x44.5mm TiN Rear Shock Shafts

$25.91

Team Associated 3.5x44.5mm TiN Rear Shock Shafts. These are replacement shock shafts intended for the Team Associated RC8T4 and RC8T4e vehicles. Package includes two 3.5x44.5mm TiN rear shock shafts.

Sold Out

Team Associated 33.5mm RC8T3 Factory Team "Chrome Finish" Front Shock Shaft (2) — Team Associated

Team Associated 33.5mm RC8T3 Factory Team "Chrome Finish" Front Shock Shaft (2)

$34.35

This is a pack of two optional Team Associated 33.5mm Factory Team "Chrome Finish" Shock Shafts for use with the RC8T3 and RC8T3e 1/8 scale truggies. These shock shafts are used in the front shocks and feature a Chrome finish for the smoothest shock...

Add to Cart

Team Associated 4-Shoe Aluminum Clutch Shoes (2) (Hard) — Team Associated

Team Associated 4-Shoe Aluminum Clutch Shoes (2) (Hard)

$27.74

This is a pack of two replacement Team Associated "Hard" 4-Shoe Aluminum Clutch Shoes.

Add to Cart

Team Associated 4-Shoe Clutch Shoe Pin Set — Team Associated

Team Associated 4-Shoe Clutch Shoe Pin Set

$19.04

This is a replacement Team Associated 4-Shoe Clutch Shoe Pin Set.    Includes:  (4) Clutch Shoe Pins, 4 Shoe Clutch (6) Washers, 5x8x0.2 (4) Washers, 3x8mm, black (1) Screws, M3x0.5x8mm SHCS  

Add to Cart

Team Associated 4-Shoe Composite Clutch Shoes (2) — Team Associated

Team Associated 4-Shoe Composite Clutch Shoes (2)

$31.22

This is a pack of two replacement Team Associated 4-Shoe Composite Clutch Shoes.

Add to Cart

Team Associated 4-Shoe Composite Clutch Shoes (2) (Hard) — Team Associated

Team Associated 4-Shoe Composite Clutch Shoes (2) (Hard)

$57.57

This is a pack of two replacement Team Associated "Hard" 4-Shoe Composite Clutch Shoes.  

Add to Cart

Team Associated 4-Shoe Vented Clutch Bell (13T) — Team Associated

Team Associated 4-Shoe Vented Clutch Bell (13T)

$39.04

This is a replacement Team Associated Vented 13 Tooth Clutch Bell for use with the 4-Shoe Clutch.

Add to Cart

Team Associated 4x85mmTurnbuckle (2) — Team Associated

Team Associated 4x85mmTurnbuckle (2)

$14.43

Team Associated RC8T3 4x85mmTurnbuckle. These are the stock replacement turnbuckles for the RC8T3 and RC8T3e trucks.

Add to Cart

Team Associated 5mm C-Clip (6) — Team Associated

Team Associated 5mm C-Clip (6)

$4.35

This is a pack of six replacement Team Associated 5mm C-Clips.   

Add to Cart

Team Associated 5x80 mm Turnbuckles — Team Associated

Team Associated 5x80 mm Turnbuckles

$17.30

This is a pack of two replacement Team Associated 5x80mm Turnbuckles for the RC8T3 and RC8T3e 1/8 truggies.

Add to Cart

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washer (Blue) (10)

$15.57

This is an optional Team Associated Blue 7.8x3.5x0.5mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washer (Blue) (10)

$15.57

This is an optional Team Associated Blue 7.8x3.5x1.0mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top