Accessories

M3 x 5.5 Steel Press Nuts - Black (10 pcs) — HobbyCarbon

M3 x 5.5 Steel Press Nuts - Black (10 pcs)

$5.00

M3 x 5.5 Steel Press Nuts (10 pcs) Colour: Matte Black

Add to Cart

Matek - CRSF to PWM Converter (6 Type) — Matek

Matek - CRSF to PWM Converter (6 Type)

$12.90

CRSF-PWM Converter, CRSF-PWM-6 Compatible with CRSF protocol receiver only Support any CRSF protocol receivers (including 433MHz, 868MHz, 915MHz, 2.4GHz) 6x PWM outputs PWM frequency configurable (50Hz default, 100,160,330, 400Hz) 2x UARTs (for...

Add to Cart

Matek - CRSF to PWM Converter (C Type) — Matek

Matek - CRSF to PWM Converter (C Type)

$19.80

CRSF-PWM Converter, CRSF-PWM-C Compatible with CRSF protocol receiver only Support any CRSF protocol receivers (including 433MHz, 868MHz, 915MHz, 2.4GHz) 10x PWM outputs PWM frequency configurable (50Hz default, 100,160,330, 400Hz) 2x UARTs (for...

Add to Cart

Matek - CRSF to PWM Converter (V10 Type) — Matek

Matek - CRSF to PWM Converter (V10 Type)

$21.90

CRSF-PWM Converter, CRSF-PWM-V10 Compatible with CRSF protocol receiver only Support any CRSF protocol receivers (including 433MHz, 868MHz, 915MHz, 2.4GHz) 10x PWM outputs PWM frequency configurable (50Hz default, 100,160,330, 400Hz) 2x UARTs (for...

Add to Cart

Matek - Micro BEC 6-30V to 5V/9V-ADJ (3 pcs) — Matek

Matek - Micro BEC 6-30V to 5V/9V-ADJ (3 pcs)

$18.00

High Efficiency Synchronous Step-down regulator Wide 6V to 30V Operating Input Range Continuous load current: 1.5 Amps (Max.2.5A 5s/minute) VOut 5V or 9V Adj. Default is 5V. VOut Load Regulation: 2% Standby current: <5mA Maximum Duty Cycle: 95% OCP...

Sold Out

Matek - Micro BEC 6-60V to 5V/9V/12V-ADJ — Matek

Matek - Micro BEC 6-60V to 5V/9V/12V-ADJ

$15.00

Wide 6V to 60V Operating Input Range Start-up Voltage >=6.7V VOut 5V, 9V or 12V Adj. Default is 5V. Maximum Duty Cycle: 100%,   when input voltage< setting value,  Regulator output voltage = Input voltage Continuous load...

Sold Out

Matek 2812 ARM LIGHT - 4 LED (4pcs) — Matek

Matek 2812 ARM LIGHT - 4 LED (4pcs)

$10.00

Arm-4 LED's: 2812 Strip style 36x7mm 6g

Sold Out

Matek 2812 ARM LIGHT - 6 LED (4pcs) — Matek

Matek 2812 ARM LIGHT - 6 LED (4pcs)

$12.00

Arm-6 LEd's: 2812 Strip style 46x7mm 7.5g

Sold Out

Matek 2812 LED Controller V2 — Matek

Matek 2812 LED Controller V2

$12.90

MatekSys 2812LED Controller V2 Button Control PWM Control 6-30v DC In @ Vbat Pad 7x colours, 6x blinking styles 4x channels Max 48x LED supported 36x13mm, 2.5g Mounting holes 30.5mm, M3 See pictures for more details

Add to Cart

Matek 2812 LED Strip Slim (8 LEDs) (2 pcs) — Matek

Matek 2812 LED Strip Slim (8 LEDs) (2 pcs)

$12.00

Description Comes as a single stick with 8 individually addressable RGB LEDs assembled and tested. Power Consumption/RGB LED 0.24W(5V 48mA) @White 0.16W(5V 32mA) @yellow/Cyan/magenta 0.08W(5V 16mA) @Green/Red/Blue Size 57mm x 8mm Applications Works...

Add to Cart

Matek FCHUB-6S PDB w/ 5V & 10V BEC plus 184A Current Sensor — Matek

Matek FCHUB-6S PDB w/ 5V & 10V BEC plus 184A Current Sensor

$15.90

Power Distribution Board with built in 5v BEC, 10v BEC, and 184A Current Sensor. Rated for up to 6S input voltage. Perfect for builds that use individual ESCs. Manual Here

Sold Out

Matek Switchable Circle LED — Matek

Matek Switchable Circle LED

$10.00

Matek switchable circle LED for distinguishing between racers.   Supported voltage of 14-16V Colours can be changed via dipswitches in centre of LED.

Add to Cart

Mini DC Adjustable Step Down Module (4.75V-23V) — Hobby Station

Mini DC Adjustable Step Down Module (4.75V-23V)

$5.00

Specifications: Module Properties: Non-isolated step-down module (BUCK) Rectification: Synchronous rectification Input voltage: DC 4.75V-23V Output voltage: DC 1.0V-17V (Adjustable, Output < Input) Output current: Rated current 1.8A (3A MAX, can not...

Add to Cart

Motor Mount for FPV Wing/Plane 22XX — Hobby Station

Motor Mount for FPV Wing/Plane 22XX

$7.00

2204 2212 2208 2216 2218 22 Brushless Outrunner Motor Mount X type Cross holder  (including 4pcs screws)  silver color  for 22 series motor  16mm/19mm motor mount holes

Sold Out

Original dys 3K Full Carbon Fiber Frame - BLACK — DYS

Original dys 3K Full Carbon Fiber Frame - BLACK

$12.00

2mm Thick Accessory for ELF - 83mm RC Racing Drone

Add to Cart

Prop Remover for Micro Drones — HappyModel

Prop Remover for Micro Drones

$2.00

Use this tool to help safetly remove props from micro drones

Add to Cart

PYRODRONE XT60 STORAGE VOLTAGE LIPO DISCHARGER - 6S — PyroDrone

PYRODRONE XT60 STORAGE VOLTAGE LIPO DISCHARGER - 6S

$4.90

The easiest way to bring your charged packs down to storage voltage!   Keep your packs healthy and safe by bringing them down to storage voltage with this simple tool!   Also available in a 4S Version!   Specs 500mw discharge power...

Add to Cart

QX95 Carbon Fibre Frame — Eachine

QX95 Carbon Fibre Frame

$30.00

Description: Brand Name: EachineItem Name: DIY Frame KitItem NO.: QX95FMaterial: Carbon FiberWheelbase: 95mmThickness:1.5mmDimension:  125*85*55mmNet Weight:  8gMotor size: 8.5x20mmFeatures:• Using 3K carbon fiber board CNC processing...

Add to Cart

Realacc HUBOSD ECO X Type w/STOSD8 Current Sensor — Realacc

Realacc HUBOSD ECO X Type w/STOSD8 Current Sensor

$32.00

Description: The HUBOSD8 has been engineered to provide the highest possible performance and reliability in a 46*36mm & 4 layers PCB. It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD8. It is specially made...

Add to Cart

Realacc HUBOSD w/ Current Sensor 5V 12V Dual BEC PDB — Realacc

Realacc HUBOSD w/ Current Sensor 5V 12V Dual BEC PDB

$32.00

Description: The HUBOSD eco has been engineered to provide the highest possible performance and reliability in a 46*36mm & 4 layers PCB.It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD8. It is specially made...

Add to Cart

Rubber ring ( 3 mm inner Diameter) 12 pcs / pack — Hobby Station

Rubber ring ( 3 mm inner Diameter) 12 pcs / pack

$4.00

3mm inner diameter rubber ring

Add to Cart

RunCam Robin - Spare Case — RunCam

RunCam Robin - Spare Case

$8.00

Replacement case for RunCam Robin FPV camera

Add to Cart

Runner250(R)-Z-08B Screw Set — Walkera

Runner250(R)-Z-08B Screw Set

$12.00

Walkera Runner 250 Advance Screw Set (R) Runner 250R-Z-08

Sold Out

Screwdriver - 2mm Philips — HappyModel

Screwdriver - 2mm Philips

$2.00

Screwdriver for mobula 7 / Mobula 7 HD / tiny Hawk / Micro Drone   The perfect sized screwdriver for philips screws on micro drones.

Add to Cart

Silicone 2mm Thickness Non-slip Mat Battery Anti-skid Pad Battery Mat for RC Multirotor — Hobby Station

Silicone 2mm Thickness Non-slip Mat Battery Anti-skid Pad Battery Mat for RC Multirotor

$5.00

Silica Gel 2mm Thickness Non-slip Mat Battery Anti-skid Pad Battery Mat for RC Multirotor Specification:Brand name: Battery MatDimension: 70mm*30mm*2mmWeight: about 5gMaterial: SiliconeFeatures:Solid and reliableStay battery positionWith...

Sold Out

Talon Wrench For RS22/MT22 ‚Series Motors(BLK) — Emax

Talon Wrench For RS22/MT22 ‚Series Motors(BLK)

$24.00

This is a wrench to help hold the motor and or loosen the nylon prop nut on your Emax 2205 RS series motor. You can use one wrench to hold the motor and another to turn it!

Add to Cart

Tarot Dual UBEC 2-6S turn 5V / 12V RC BEC TL2075 — Tarot

Tarot Dual UBEC 2-6S turn 5V / 12V RC BEC TL2075

$12.00

Tarot 2-6S turn 5V / 12V RC BEC TL2075 for image transmission for multicopter drone with camera Specifications: - Dimension:33*21*7mm - Weight:8g - Voltage input: 2-6S - Voltage output: 5V/12V switchable - Current output: 2A - CNC Alluminum alloy...

Sold Out

Tarot LED Light for Quadcopter (1pc Green & 1pc Red) — Tarot

Tarot LED Light for Quadcopter (1pc Green & 1pc Red)

$10.00

Tarot LED Light   Works with 3S-4S Lipo Red LED for the Port Side (Left) Green LED for the Starboard Side (Right)  

Sold Out

TBS - Glass ND16 Filter — TBS

TBS - Glass ND16 Filter

$9.40

ND16 glass filters to protect your GoPro HD camera BACKGROUND: The lens is cut using industrial strength lasers. The result is a clean and extremely sharp finish absent of "Micro-scratches". (The tiny spots on your window.) Our lens is produced from...

Add to Cart

TBS - Glass ND32 Filter — TBS

TBS - Glass ND32 Filter

$9.40

ND32 glass filters to protect your GoPro HD camera BACKGROUND: The lens is cut using industrial strength lasers. The result is a clean and extremely sharp finish absent of "Micro-scratches". (The tiny spots on your window.) Our lens is produced from...

Add to Cart

TBS - Glass ND8 Filter — TBS

TBS - Glass ND8 Filter

$9.40

ND8 glass filters to protect your GoPro HD camera BACKGROUND: The lens is cut using industrial strength lasers. The result is a clean and extremely sharp finish absent of "Micro-scratches". (The tiny spots on your window.) Our lens is produced from...

Add to Cart

TBS Crossfire Immortal T V2 Antenna — TBS

TBS Crossfire Immortal T V2 Antenna

$10.90

THE TBS IMMORTAL T V2 ANTENNA! With improved signal sensitivity and durability, the Immortal T v2 antenna is the perfect companion for race quads. The centerpiece housing is made out of a rubberized plastic material which will allow a certain degree of...

Add to Cart

TBS Flux — TBS

TBS Flux

$9.90

Soldering flux is used before and during soldering to prevent oxidation and create better, cleaner solder joints. This flux type: NC-559-ASM-UV is very popular in the electronics repair industry, used by many professionals.   The TBS Flux is a...

Sold Out

TBS FPV CHAIR — TBS

TBS FPV CHAIR

$69.00

A lightweight but sturdy folding camping chair with swivel mount. Perfect for a chilled FPV experience.   Your throne for FPV out in the field, take a load off your feet and enjoy the moment.   Simple travel chair weighs 1230g and contains...

Add to Cart

TBS M10 GPS (Glonass) — TBS

TBS M10 GPS (Glonass)

$28.90

SPECIFICATION Chipset - ublox UBX-M10050Flash memory for saving configuration.Frequency - L1, 1575.42MHz ; L2,1561.10MHZ；L3,1602.00MHZBaud Rate - 4800bps-921600bps, default 38400bpsChannel - N/aSensitivity - (Tracking: -166dBm) | (Capture: -160dBm) |...

Add to Cart

TBS M8-2 GPS (GLONASS) — TBS

TBS M8-2 GPS (GLONASS)

$25.90

SPECIFICATION Chipset - ublox UBX-M8030 Flash memory for saving configuration. Frequency - L1, 1575.42MHz ; L2,1561.10MHZ；L3,1602.00MHZ Baud Rate - 4800bps-921600bps (Default - 9600bps) Channel - 72ch Sensitivity - (Tracking: -164dBm) | (Capture:...

Add to Cart

TBS Maintenance Mat — TBS

TBS Maintenance Mat

$25.00

Need a good looking mat to scatter your parts on? TBS Maintenance Mat is your best option! Neoprene-rubber mat with anti-slip, stays in place on any surface and keeps your desk clutter-free.¬† SPECIFICATION 70 x 50 (cm) / 20 x 28 (in) Silk finish on...

Add to Cart

TBS Swagger Battery Straps "UNBREAKABLE" 240mm (2pcs) — TBS

TBS Swagger Battery Straps "UNBREAKABLE" 240mm (2pcs)

$9.90

The newest unbreakable strap from "Swagger-FPV-Shizzle" in cooperation with Team BlackSheep. Size: 240 x 20mm

Add to Cart

TBS Swagger Battery Straps XL "UNBREAKABLE" 280mm (2pcs) — TBS

TBS Swagger Battery Straps XL "UNBREAKABLE" 280mm (2pcs)

$9.90

The newest unbreakable strap from "Swagger-FPV-Shizzle" in cooperation with Team BlackSheep. Specialy designed for large Lipos like 6s Size: 280 x 20mm

Add to Cart

TBS SWAGGER STRAPS SLIM "UNBREAKABLE" 260MM 2PCS — TBS

TBS SWAGGER STRAPS SLIM "UNBREAKABLE" 260MM 2PCS

$11.90

Made for High Performance Race Copters with 20x20mm Electronic Stacks.   This strap is only 16mm wide

Sold Out

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top