B74 Series (B74, B74.1, B74.2, B74.2CE)

Replacement and option parts for the Team Associated RC10 B74 range of 1/10 offroad buggies. Please double check the part number in your manual to confirm compatibility. If in doubt don't hesitate to contact us for advice.

Team Associated 3x45mm/1.775" Titanium Turnbuckle — Team Associated

Team Associated 3x45mm/1.775" Titanium Turnbuckle

$29.80

This is a set of two replacement Factory Team blue titanium 1.775" turnbuckles from Team Associated.

Add to Cart

Team Associated 3x48mm Turnbuckles (2) — Team Associated

Team Associated 3x48mm Turnbuckles (2)

$15.90

This is a pack of two replacement Team Associated 3x48mm Turnbuckles. These are used as steering turnbuckles on the B6 and B6D vehicles.

Add to Cart

Team Associated 3x48mm/1.875" Titanium Turnbuckle Set (Silver) (2) — Team Associated

Team Associated 3x48mm/1.875" Titanium Turnbuckle Set (Silver) (2)

$32.50

This is an optional Team Associated 1.875" Titanium Turnbuckle Set, and is intended for use with the Associated TC6.1 1/10 touring car.

Add to Cart

Team Associated 3x7x3mm Ball Bearing (8) — Team Associated

Team Associated 3x7x3mm Ball Bearing (8)

$35.90

This is a pack of eight replacement Team Associated 3x7x3mm Ball Bearings. These bearings are used in the steering rack and steering bellcranks.  

Add to Cart

Team Associated 3x8mm Washer (10) — Team Associated

Team Associated 3x8mm Washer (10)

$5.40

This is a pack of ten replacement 3x8mm washers for the Team Associated off-road buggy.    

Add to Cart

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set (2) — Team Associated

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set (2)

$29.80

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set. Package includes two ball studs.  

Add to Cart

Team Associated 5.1x8.0x0.20mm Shims (9) — Team Associated

Team Associated 5.1x8.0x0.20mm Shims (9)

$11.60

This is a replacement pack of ten Team Associated 5.1x8.0x0.20mm Shims, for use on RC10B74 to replace 5x12x0.2mm in the Team Associated RC10B74 Differential Rebuild Kit (TA10-92132). This shim will resist coning under load and prevent the differential...

Sold Out

Team Associated 5.5x0.5mm Aluminum Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 5.5x0.5mm Aluminum Ball Stud Washer (Blue) (10)

$16.60

This is a pack of ten Team Associated 5.5x0.5mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications.    These small outside diameter shims, common for on-road, are now available...

Add to Cart

Team Associated 5.5x1.0mm Aluminum Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 5.5x1.0mm Aluminum Ball Stud Washer (Blue) (10)

$17.90

This is a pack of ten Team Associated 5.5x1.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications.    These small outside diameter shims, common for on-road, are now available...

Add to Cart

Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10)

$17.90

This is a pack of ten Team Associated 5.5x2.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications. These small outside diameter shims, common for on-road, are now available separately...

Add to Cart

Team Associated 5mm Long Ball Stud (10) — Team Associated

Team Associated 5mm Long Ball Stud (10)

$33.90

This is a pack of ten replacement Team Associated 5mm Long Ball Studs.

Add to Cart

Team Associated 5x10x4mm Factory Team Flanged Bearings (4) — Team Associated

Team Associated 5x10x4mm Factory Team Flanged Bearings (4)

$24.80

Team Associated 5x10x4mm Factory Team Flanged Bearings. These replacement bearings are intended for the RC10B74.2 and B74.2D series of vehicles. Package includes four 5x10x4mm flanged bearings.

Add to Cart

Team Associated 6mm Heavy Duty Ballstud Set (8) — Team Associated

Team Associated 6mm Heavy Duty Ballstud Set (8)

$34.90

This is a replacement Team Associated 6mm Heavy Duty Ballstud Set, and is intended for use with the Associated SC10 4x4, B5 and B5M vehicles.

Add to Cart

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2) — Team Associated

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2)

$24.80

This is a replacement Team Associated 7mm Clamping Wheel Hex Set, intended for use with the RC10 B5M Factory Lite kit. These hexes can be used optionally with the T5M to produce the stock offset. Additionally, these hexes can also be used with the B5 and...

Sold Out

Team Associated 7.8x0.5mm Aluminum Bulkhead Washer (Blue) (10) — Team Associated

Team Associated 7.8x0.5mm Aluminum Bulkhead Washer (Blue) (10)

$17.90

This is a ten pack of Team Associated 0.5mm Thick Aluminum Bulkhead Washers. These washers are made from aluminum alloy material and anodized blue. Great for all 1:10 scale vehicles  

Add to Cart

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washer (Blue) (10)

$17.90

This is a pack of ten Team Associated 7.8x1.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications. These large outside diameter shims, common for off-road and bulkhead/arm mount shimming in...

Add to Cart

Team Associated 7.8x2.0mm Aluminum Bulkhead Washer (Blue) (10) — Team Associated

Team Associated 7.8x2.0mm Aluminum Bulkhead Washer (Blue) (10)

$17.90

This is a ten pack of Team Associated 2.0mm Thick Aluminum Bulkhead Washers. These washers are made from aluminum alloy material and anodized blue. Great for all 1:10 scale vehicles.

Add to Cart

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washer (Blue) (10)

$17.90

This is an optional Team Associated Blue 7.8x3.5x0.5mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washer (Blue) (10)

$17.90

This is an optional Team Associated Blue 7.8x3.5x1.0mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washer (Blue) (10)

$17.90

This is an optional Team Associated Blue 7.8x3.5x2.0mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Team Associated 8.5mm Factory Team Aluminum Clamping Wheel Hex (2) — Team Associated

Team Associated 8.5mm Factory Team Aluminum Clamping Wheel Hex (2)

$26.50

This is a pack of two optional Team Associated 8.5mm Aluminum Clamping Wheel Hexes. These hexes also includes two axle pins and hex screws.

Add to Cart

Team Associated 8mm Ballstud (6) (Long) — Team Associated

Team Associated 8mm Ballstud (6) (Long)

$31.50

This is a pack of six replacement Team Associated 8mm Long Ballstuds.

Add to Cart

Team Associated 8mm Factory Team Heavy Duty Titanium Ball Stud Set (2) — Team Associated

Team Associated 8mm Factory Team Heavy Duty Titanium Ball Stud Set (2)

$29.80

Team Associated 8mm Factory Team Heavy Duty Titanium Ball Stud Set. This optional ball stud can be used in place of TA10-91048. In the B6 and B6D model this ball stud is used in the rear inner camber link mount, steering block and steering rack, Package...

Add to Cart

Team Associated 8mm Heavy Duty Ballstud Set (7) — Team Associated

Team Associated 8mm Heavy Duty Ballstud Set (7)

$33.10

This is a replacement Team Associated 8mm Heavy Duty Ballstud Set, and is intended for use with the Associated SC10 4x4, B5 and B5M vehicles.  

Add to Cart

Team Associated AE Branding Decal Sheet — Team Associated

Team Associated AE Branding Decal Sheet

$13.20

Team Associated AE Branding Decal Sheet. This decal sheet features many brandings Team Associated is known for. Package includes one decal sheet.  

Add to Cart

Team Associated Aluminum Servo Washers (Black) — Team Associated

Team Associated Aluminum Servo Washers (Black)

$13.30

Team Associated Aluminum Servo Washers. Gain more secure servo mounting with these aluminum servo washers. They preserve the structural integrity of the servo ears. Package includes four washers. Features: Machined from aluminum and anodized...

Add to Cart

Team Associated Arm Mount Inserts — Team Associated

Team Associated Arm Mount Inserts

$16.60

Team Associated Arm Mount Inserts. These are the replacement inserts for the RC10 B6 and B6D buggies.   Includes Arm Mount Inserts: (4) 0, 0 (4) 0, 0.35 (4) 0, 0.7 (4) 0.35, 0.35 (4) 0.7, 0.7   See the 6-Series C and D Mount Pill...

Add to Cart

Team Associated B6 Ballcups (14 pcs) — Team Associated

Team Associated B6 Ballcups (14 pcs)

$14.50

Team Associated B6 Ballcups. These are the replacement ball cups for the RC10 B6 and B6D buggies. Package includes twelve standard ball cups and two offset ball cups.

Add to Cart

Team Associated B6 Caster Hat Bushings — Team Associated

Team Associated B6 Caster Hat Bushings

$22.90

Team Associated B6 Caster Hat Bushings. These are the replacement caster hat bushings for the RC10 B6 and B6D buggies. Package includes 0mm, 1mm, 2mm and 3mm bushings, two of each.  

Add to Cart

Team Associated B6 Wing — Team Associated

Team Associated B6 Wing

$17.90

Team Associated B6 Wing. Package includes one clear, untrimmed wing that fits the RC10 buggies.  

Add to Cart

Team Associated B6.1/B6.1D Aluminum Differential Height Inserts — Team Associated

Team Associated B6.1/B6.1D Aluminum Differential Height Inserts

$48.00

These optional Team Associated B6.1 Aluminum Differential Height Inserts replace your standard diff height adjusters to provide long-lasting operation. Orientation numbers are etched onto the inserts, making them easy to read.   

Add to Cart

Team Associated B6.1/B6.1D Ball Ends — Team Associated

Team Associated B6.1/B6.1D Ball Ends

$17.90

Team Associated B6.1/B6.1D Ball Ends. These are the replacement ball ends used on the B6.1 and B6.1D models.  

Add to Cart

Team Associated B6.1/B6.1D Shock Caps & Spring Cups — Team Associated

Team Associated B6.1/B6.1D Shock Caps & Spring Cups

$27.90

Team Associated B6.1/B6.1D Shock Caps & Spring Cups. These are the replacement shock caps and spring cups included with the B6.1 and B6.1D kits. Package includes spring cups, shock caps, o-rings and shock cap bleeder screws.

Add to Cart

Team Associated B6.1/B6.1D Shock Pivot Ball (4) — Team Associated

Team Associated B6.1/B6.1D Shock Pivot Ball (4)

$11.60

This is a pack of four replacement Team Associated Shock Pivot Ball for the B6.1 and B6.1D.   

Add to Cart

Team Associated B64 Plastic Gear Differential Gear Set — Team Associated

Team Associated B64 Plastic Gear Differential Gear Set

$14.90

This is a replacement Team Associated Plastic Gear Differential Gear Set. This set includes the necessary gears for one differential.   Includes: (2) Sun Gears  (4) Planet Gears  

Add to Cart

Team Associated B74 10° Aluminum Caster Block Set — Team Associated

Team Associated B74 10° Aluminum Caster Block Set

$91.00

This is a pack of two optional Team Associated B74 10° Aluminum Caster Blocks. These blocks provide slightly less Caster than the stock 9° blocks (TA92176).   8° Caster Blocks are also available; TA92175  

Sold Out

Team Associated B74 8° Aluminum Caster Block Set — Team Associated

Team Associated B74 8° Aluminum Caster Block Set

$91.00

This is a pack of two optional Team Associated B74 8° Aluminum Caster Blocks. These blocks provide slightly less Caster than the stock 9° blocks (TA92176).   10° Caster Blocks are also available; TA92177.   

Add to Cart

Team Associated B74 9° Aluminum Caster Block Set — Team Associated

Team Associated B74 9° Aluminum Caster Block Set

$96.90

These are the stock replacement Team Associated B74 9° Aluminum Caster Block Set. Also available are the 8° (TA92175) and 10° (TA92177) Blocks.   

Add to Cart

Team Associated B74.1 Factory Team 2.0mm Carbon Chassis Brace Support Set — Team Associated

Team Associated B74.1 Factory Team 2.0mm Carbon Chassis Brace Support Set

$34.80

This is an optional Team Associated RC10 B74.1 Factory Team 2.0mm Carbon Chassis Brace Support Set, intended for use with the RC10 B74.1 and RC10 B74.1D Team 1/10 4WD Off-Road Electric Buggy Kits. This part is cut from quality carbon plate.

Add to Cart

Team Associated B74.1 Factory Team 2.0mm Carbon Flex Chassis Brace Support Set — Team Associated

Team Associated B74.1 Factory Team 2.0mm Carbon Flex Chassis Brace Support Set

$34.80

This is an optional Team Associated B74.1 Factory Team 2.0mm Carbon Flex Chassis Brace Support Set, intended for use with the RC10 B74.1 and RC10 B74.1D Team 1/10 4WD Off-Road Electric Buggy Kits. This part is cut from quality carbon plate.

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top