null
JConcepts SC6.1 Wheelie Bar Kit
Comments

JConcepts SC6.1 Wheelie Bar Kit

(No reviews yet) Write a Review
$169.00
SKU:
JC2709
Shipping:
Calculated at Checkout

Fits - SC6.1 converted to Street Eliminator

 

Requires - Shapeways part and #2419 shock tower

(both sold separately)

 

JConcepts is on top of the Street Eliminator game by offering a wheelie bar kit for the Team Associated SC6.1. This item can be used on an SC6.1 as the intended SCT truck or how we have used it, converted to Street Eliminator vehicle. The wheelie bar kit contains carbon fiber rails, aluminum stand-offs, bearing holder and inner race support along with rubber sealed bearings and steel 3mm hardware.

 

This assembly has been designed to work with a 3D printed part available separately from our Shapeways Store. The bulkhead skid (2714TD) for the wheelie bar is necessary to use existing SC6.1 parts along with the wheelie bar conversion parts to compete the assembly. The JConcepts item replaces the AE 71125 which is part of the rear bumper assembly on the SC6.1. To learn more about the JConcepts Street Eliminator build for the SC6.1, please visit the JConcepts Garage.

Assembly:

Remove the AE rear skid and replace it with the JConcepts (Shapeways) bulkhead skid, it’s no longer necessary to use the rear lower bumper brace or rear SC6.1 bumper. From there, it’s necessary to build up the wheelie bar by assembling 5 aluminum tubes to the carbon fiber rails using the 3x8mm BHCS. Slide the bearings onto the bearing holders and ready the inner race support for the next assembly.

 

The last aluminum tube is placed at the “wheel” end of the carbon fiber rails by using the 3x14mm SHCS through the assembled bearing and bearing holder sub-assembly built above. Before threading, be sure to place the bearing race support between the bearing race and carbon rail. Clinch down the assembly and confirm all bearing holders and inner race supports are built correctly and the bearings roll smoothly.

 

Now that the wheelie bar is built, attach it to the rear section of the SC6.1 and run the 3x14mm BHCS into each side on the top of the bulkhead skid. Finish the assembly by installing the two 3x8mm BHCS screws into the bottom position on the bulkhead skid. The angle of the wheelie bar can be tuned by changing the top position which alters the height. As standard, we recommend the 2nd hole out which should allow some weight transfer to the rear and minimal wheelie height upon acceleration.

 

Accessory:

An accessory 3D printed net (2715TD) is additionally offered on the JConcepts Shapeways Store. The net is designed to work with conversion parts and can be purchased in white or black colors to match different builds and creations.

Features:

  • Aluminum and carbon fiber construction
  • Simple assembly
  • Heavy-duty 3mm hardware
  • Compatible with JConcepts Shapeways items

 

DOWNLOAD FILE

 

Setup notes:

In order to setup your SC6.1 to make it a Street Eliminator machine, it’s necessary to make changes. First, check our build located on the JConcepts Garage showing the detail and parts used throughout. The JConcepts racer has been built using B6 front and rear arms as well as turnbuckles which bolt directly to the SC6.1. It’s necessary to run a B6 buggy front shock tower and shocks on the front-end while the rear should also use stadium truck front shocks and the JConcepts #2419 rear tower.

 

Front suspension:

AE #91673 – B6 gull wing front arms

AE #91768 – Team Associated B6.1/B6.1D Carbon Fiber "Gullwing" Front Shock Tower

AE #91727 – B6.1 Titanium turnbuckle kit (complete vehicle set)

AE #91480 – 23mm shock bodies

AE #91624 – 21mm shock shaft

AE #91626 – 1.6 piston

AE #91820 – Long shock end

AE #91330 / AE #91342 – blue front springs

JC #2295 – 1, 3.3mm limiter, 1, 6.4mm limiter (inner limiters)

JC #2295 – 1, 3.3mm limiter (outside up-travel limiter)

AE #5423 – 40wt shock oil

 

Rear suspension:

AE #91777 – B6.1 rear suspension arms

AE #91434 – 67mm rear CVA bone

JC #2419 – JConcepts drag racing rear shock tower

AE #91481 – 27.5mm shock bodies

AE #91624 – 21mm shock shaft

AE #91627 – 1.7 piston

AE #91820 – short shock end

AE #91331 / AE #91343 – yellow front springs

JC #2295 – 1, 3.3mm limiter, 1, 6.4mm limiter (inner limiters)

JC #2295 – 1, 3.3mm limiter (outside up-travel limiter)

AE #5423 – 40wt shock oil

Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Related Products

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top