B6 Series (B6, B6.1, B6.2, B6.3, B6.4)

Replacement and option parts for the Team Associated B6 series of 1/10 2WD offroad buggys. Please double check the part number in your manual to confirm compatibilty. If in doubt don't hesitate to contact us for advice.

Team Associated 3x48mm Turnbuckles (2) — Team Associated

Team Associated 3x48mm Turnbuckles (2)

$15.90

This is a pack of two replacement Team Associated 3x48mm Turnbuckles. These are used as steering turnbuckles on the B6 and B6D vehicles.

Add to Cart

Team Associated 3x48mm/1.875" Titanium Turnbuckle Set (Silver) (2) — Team Associated

Team Associated 3x48mm/1.875" Titanium Turnbuckle Set (Silver) (2)

$32.50

This is an optional Team Associated 1.875" Titanium Turnbuckle Set, and is intended for use with the Associated TC6.1 1/10 touring car.

Add to Cart

Team Associated 3x7x3mm Ball Bearing (8) — Team Associated

Team Associated 3x7x3mm Ball Bearing (8)

$35.90

This is a pack of eight replacement Team Associated 3x7x3mm Ball Bearings. These bearings are used in the steering rack and steering bellcranks.  

Add to Cart

Team Associated 3x8mm Washer (10) — Team Associated

Team Associated 3x8mm Washer (10)

$5.40

This is a pack of ten replacement 3x8mm washers for the Team Associated off-road buggy.    

Add to Cart

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set (2) — Team Associated

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set (2)

$29.80

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set. Package includes two ball studs.  

Add to Cart

Team Associated 4mm Heavy Duty Ball Stud Set (8) — Team Associated

Team Associated 4mm Heavy Duty Ball Stud Set (8)

$31.50

This is a replacement set of eight Team Associated 4mm Heavy Duty Ballstuds.  

Add to Cart

Team Associated 5.5x0.5mm Aluminum Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 5.5x0.5mm Aluminum Ball Stud Washer (Blue) (10)

$16.60

This is a pack of ten Team Associated 5.5x0.5mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications.    These small outside diameter shims, common for on-road, are now available...

Add to Cart

Team Associated 5.5x1.0mm Aluminum Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 5.5x1.0mm Aluminum Ball Stud Washer (Blue) (10)

$17.90

This is a pack of ten Team Associated 5.5x1.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications.    These small outside diameter shims, common for on-road, are now available...

Add to Cart

Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10)

$17.90

This is a pack of ten Team Associated 5.5x2.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications. These small outside diameter shims, common for on-road, are now available separately...

Add to Cart

Team Associated 5/64" Precision Differential Thrust Ball (6) — Team Associated

Team Associated 5/64" Precision Differential Thrust Ball (6)

$5.90

This is a set of six replacement differential thrust balls for the Team Associated vehicles. These balls go in the differential around the thrust bolt.

Add to Cart

Team Associated 5mm Long Ball Stud (10) — Team Associated

Team Associated 5mm Long Ball Stud (10)

$33.90

This is a pack of ten replacement Team Associated 5mm Long Ball Studs.

Add to Cart

Team Associated 6mm Heavy Duty Ballstud Set (8) — Team Associated

Team Associated 6mm Heavy Duty Ballstud Set (8)

$34.90

This is a replacement Team Associated 6mm Heavy Duty Ballstud Set, and is intended for use with the Associated SC10 4x4, B5 and B5M vehicles.

Add to Cart

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2) — Team Associated

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2)

$24.80

This is a replacement Team Associated 7mm Clamping Wheel Hex Set, intended for use with the RC10 B5M Factory Lite kit. These hexes can be used optionally with the T5M to produce the stock offset. Additionally, these hexes can also be used with the B5 and...

Sold Out

Team Associated 7.8x0.5mm Aluminum Bulkhead Washer (Blue) (10) — Team Associated

Team Associated 7.8x0.5mm Aluminum Bulkhead Washer (Blue) (10)

$17.90

This is a ten pack of Team Associated 0.5mm Thick Aluminum Bulkhead Washers. These washers are made from aluminum alloy material and anodized blue. Great for all 1:10 scale vehicles  

Add to Cart

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washer (Blue) (10) — Team Associated

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washer (Blue) (10)

$17.90

This is a pack of ten Team Associated 7.8x1.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications. These large outside diameter shims, common for off-road and bulkhead/arm mount shimming in...

Add to Cart

Team Associated 7.8x2.0mm Aluminum Bulkhead Washer (Blue) (10) — Team Associated

Team Associated 7.8x2.0mm Aluminum Bulkhead Washer (Blue) (10)

$17.90

This is a ten pack of Team Associated 2.0mm Thick Aluminum Bulkhead Washers. These washers are made from aluminum alloy material and anodized blue. Great for all 1:10 scale vehicles.

Add to Cart

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washer (Blue) (10)

$17.90

This is an optional Team Associated Blue 7.8x3.5x0.5mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washer (Blue) (10)

$17.90

This is an optional Team Associated Blue 7.8x3.5x1.0mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washer (Blue) (10) — Team Associated

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washer (Blue) (10)

$17.90

This is an optional Team Associated Blue 7.8x3.5x2.0mm Aluminum Hub Spacer Washer Set, intended for use with the RC8B3 and RC8T3 series vehicles for adjusting the wheelbase. Thicknesses range from .5mm, 1mm, and 2mm. Use these on any vehicle with 3.5mm...

Add to Cart

Team Associated 8.5mm Factory Team Aluminum Clamping Wheel Hex (2) — Team Associated

Team Associated 8.5mm Factory Team Aluminum Clamping Wheel Hex (2)

$26.50

This is a pack of two optional Team Associated 8.5mm Aluminum Clamping Wheel Hexes. These hexes also includes two axle pins and hex screws.

Add to Cart

Team Associated 8mm Ballstud (6) (Long) — Team Associated

Team Associated 8mm Ballstud (6) (Long)

$31.50

This is a pack of six replacement Team Associated 8mm Long Ballstuds.

Add to Cart

Team Associated 8mm Factory Team Heavy Duty Titanium Ball Stud Set (2) — Team Associated

Team Associated 8mm Factory Team Heavy Duty Titanium Ball Stud Set (2)

$29.80

Team Associated 8mm Factory Team Heavy Duty Titanium Ball Stud Set. This optional ball stud can be used in place of TA10-91048. In the B6 and B6D model this ball stud is used in the rear inner camber link mount, steering block and steering rack, Package...

Add to Cart

Team Associated 8mm Heavy Duty Ballstud Set (7) — Team Associated

Team Associated 8mm Heavy Duty Ballstud Set (7)

$33.10

This is a replacement Team Associated 8mm Heavy Duty Ballstud Set, and is intended for use with the Associated SC10 4x4, B5 and B5M vehicles.  

Add to Cart

Team Associated AE Branding Decal Sheet — Team Associated

Team Associated AE Branding Decal Sheet

$13.20

Team Associated AE Branding Decal Sheet. This decal sheet features many brandings Team Associated is known for. Package includes one decal sheet.  

Add to Cart

Team Associated Aluminum B6.1 Chassis — Team Associated

Team Associated Aluminum B6.1 Chassis

$132.30

This is a replacement Team Associated Aluminum B6.1 Chassis.  

Add to Cart

Team Associated Aluminum Servo Washers (Black) — Team Associated

Team Associated Aluminum Servo Washers (Black)

$13.30

Team Associated Aluminum Servo Washers. Gain more secure servo mounting with these aluminum servo washers. They preserve the structural integrity of the servo ears. Package includes four washers. Features: Machined from aluminum and anodized...

Add to Cart

Team Associated Arm Mount Inserts — Team Associated

Team Associated Arm Mount Inserts

$16.60

Team Associated Arm Mount Inserts. These are the replacement inserts for the RC10 B6 and B6D buggies.   Includes Arm Mount Inserts: (4) 0, 0 (4) 0, 0.35 (4) 0, 0.7 (4) 0.35, 0.35 (4) 0.7, 0.7   See the 6-Series C and D Mount Pill...

Add to Cart

Team Associated B6 "Flat" Front Arms — Team Associated

Team Associated B6 "Flat" Front Arms

$16.60

Team Associated B6 "Flat" Front Arms. These are the replacement flat arms for the RC10 B6, but when combined with the flat front shock tower (91661) are compatible with the B6D as well.   

Add to Cart

Team Associated B6 "Gullwing" Front Arms — Team Associated

Team Associated B6 "Gullwing" Front Arms

$17.90

Team Associated B6 "Gullwing" Front Arms. These are the replacement gullwing front arms for the RC10 B6D, but when combined with the gullwing front shock tower (TA10-91768) are compatible with the B6 as well.

Add to Cart

Team Associated B6 Aluminium "D" Arm Mount — Team Associated

Team Associated B6 Aluminium "D" Arm Mount

$28.20

Team Associated B6 Aluminium "D" Arm Mount. This is the replacement "d" arm mount for the RC10 B6 and B6D buggies.

Add to Cart

Team Associated B6 Ballcups (14 pcs) — Team Associated

Team Associated B6 Ballcups (14 pcs)

$14.50

Team Associated B6 Ballcups. These are the replacement ball cups for the RC10 B6 and B6D buggies. Package includes twelve standard ball cups and two offset ball cups.

Add to Cart

Team Associated B6 Battery Foams — Team Associated

Team Associated B6 Battery Foams

$8.30

Team Associated B6 Battery Foams. These are the replacement foam battery pads for the RC10 B6 and B6D buggies. Package includes six foam pads.   

Sold Out

Team Associated B6 Battery Tray Shoulder Screws — Team Associated

Team Associated B6 Battery Tray Shoulder Screws

$10.00

Team Associated B6 Battery Tray Shoulder Screws. These are the replacement battery tray screws for the RC10 B6 and B6D buggies. Package includes two shoulder screws.

Add to Cart

Team Associated B6 Bulkhead — Team Associated

Team Associated B6 Bulkhead

$11.60

Team Associated B6 Bulkhead. This is the replacement front bulkhead for the RC10 B6 and B6D buggies.  Hinge Pin Brace now sold separately here TA10-91657  

Add to Cart

Team Associated B6 Bumper Set — Team Associated

Team Associated B6 Bumper Set

$10.50

Team Associated B6 Bumper Set. This is the replacement bumper set for the RC10 B6 and B6D buggies. Package includes front and rear bumpers.  

Add to Cart

Team Associated B6 Caster Hat Bushings — Team Associated

Team Associated B6 Caster Hat Bushings

$22.90

Team Associated B6 Caster Hat Bushings. These are the replacement caster hat bushings for the RC10 B6 and B6D buggies. Package includes 0mm, 1mm, 2mm and 3mm bushings, two of each.  

Add to Cart

Team Associated B6 Chassis Braces — Team Associated

Team Associated B6 Chassis Braces

$17.90

Team Associated B6 Chassis Braces. These are the replacement rear chassis braces for the RC10 B6 and B6D buggies. Package includes one B6 style brace, one B6D style brace and two pivot balls.   

Add to Cart

Team Associated B6 Differential Outdrives — Team Associated

Team Associated B6 Differential Outdrives

$43.00

Team Associated B6 Differential Outdrives. These are the replacement outdrives for the RC10 B6 and B6D buggies equipped with the optional ball differential (TA10-91702). Package includes left and right side outdrives.  

Add to Cart

Team Associated B6 Factory Team Aluminium Steering Rack — Team Associated

Team Associated B6 Factory Team Aluminium Steering Rack

$29.80

Team Associated B6 Factory Team Aluminum Steering Rack. This is the optional aluminum steering rack for the RC10 B6 and B6D buggies.   

Add to Cart

Team Associated B6 Factory Team Aluminum Bulkhead (-2.5/+2.5 Degrees) — Team Associated

Team Associated B6 Factory Team Aluminum Bulkhead (-2.5/+2.5 Degrees)

$52.40

Team Associated B6 Factory Team Aluminum Bulkhead. This is an optional aluminum bulkhead for the RC10 B6 and B6D buggies. This bulkhead weighs 10 grams and allows the user to adjust the kickup angle by +2.5 degrees, or -2.5 degrees. Package includes...

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top