B6 Series (B6, B6.1, B6.2, B6.3, B6.4)

Replacement and option parts for the Team Associated B6 series of 1/10 2WD offroad buggys. Please double check the part number in your manual to confirm compatibilty. If in doubt don't hesitate to contact us for advice.

Team Associated B6 Factory Team Aluminum Steering Bellcrank — Team Associated

Team Associated B6 Factory Team Aluminum Steering Bellcrank

$29.80

Team Associated B6 Factory Team Aluminum Steering Bellcrank. This is the optional aluminum bellcrank set for the RC10 B6 and B6D buggies. Package includes left and right side bellcranks and one ballstud washer.   

Sold Out

Team Associated B6 Factory Team Graphite ESC Plate (7.5g) — Team Associated

Team Associated B6 Factory Team Graphite ESC Plate (7.5g)

$38.10

The Team Associated B6 Factory Team Graphite ESC Plate is a lightweight option that allows easy installation and removal of your electronics for easy chassis cleanup.    Features:  Made from high quality 1.5mm woven graphite...

Sold Out

Team Associated B6 Factory Team Graphite Servo Chassis Plate (5g) — Team Associated

Team Associated B6 Factory Team Graphite Servo Chassis Plate (5g)

$29.80

Weighing just 5 grams, this Factory Team graphite servo tray installs under your servo for added bling.   

Add to Cart

Team Associated B6 Front Axles — Team Associated

Team Associated B6 Front Axles

$27.90

Team Associated B6 Front Axles. These are the replacement aluminum front axles for the RC10 B6 and B6D buggies. Package includes two front axles.  

Add to Cart

Team Associated B6 Front Hinge Pin Brace — Team Associated

Team Associated B6 Front Hinge Pin Brace

$6.70

Team Associated B6 Front Hinge Pin Brace. This is the replacement front hinge pin brace for the RC10 B6, B6.1 and B6.2 models, as well as the RC10 SC6.1 and T6.1 models. Package includes one hinge pin brace. 

Add to Cart

Team Associated B6 FT ALUMINUM REAR HUBS — Team Associated

Team Associated B6 FT ALUMINUM REAR HUBS

$74.40

The Team Associated B6/B6D Factory Team Aluminum Rear Hub Set allows the ability to run 67mm CVA bones for increased rear support under lower ride height conditions. Axle height is adjustable by using the existing plastic inserts that come with the stock...

Add to Cart

Team Associated B6 Hinge Pin Set — Team Associated

Team Associated B6 Hinge Pin Set

$21.50

Team Associated B6 Hinge Pin Set. These are the replacement hinge pins for the RC10 B6 and B6D buggies. Package includes front and rear, inner and outer hinge pins. Hinge Pin sizes: 3x26mm (2) 3x34mm (2) 3.5x48mm (2)

Add to Cart

Team Associated B6 Laydown Idler Gear (39T) — Team Associated

Team Associated B6 Laydown Idler Gear (39T)

$13.30

Team Associated B6 Laydown Idler Gear. These are the replacement idler gears for the RC10 B6, as well as teh B6D when equipped with a laydown transmission. Package includes two 39 tooth idler gears.  

Add to Cart

Team Associated B6 SERVO HORNS, 15.5mm — Team Associated

Team Associated B6 SERVO HORNS, 15.5mm

$16.60

This is a replacement Team Associated 15.5mm B6 Servo Horn Set, including a 23, 24 and 25T horn.   

Add to Cart

Team Associated B6 Servo Mounts — Team Associated

Team Associated B6 Servo Mounts

$31.50

Team Associated B6 Servo Mounts. These are the replacement servo mounts for the RC10 B6 and B6D buggies. Package includes left and right side servo mounts.

Add to Cart

Team Associated B6 Standup Idler Gear (26T) — Team Associated

Team Associated B6 Standup Idler Gear (26T)

$14.50

Team Associated B6 Standup Idler Gear. These are the replacement idler gears for the RC10 B6D, but are also compatible with the B6 when equipped with a standup transmission. Package includes two 26 tooth idler gears.

Add to Cart

Team Associated B6 Steel Chassis Weight (36g) — Team Associated

Team Associated B6 Steel Chassis Weight (36g)

$29.80

This is an optional Team Associated 36 Gram Steel Chassis Weight for the B6 and B6D buggies. Package also includes four mounting screws.  

Add to Cart

Team Associated B6 Steel Servo Chassis Weight (24g) — Team Associated

Team Associated B6 Steel Servo Chassis Weight (24g)

$33.80

This is an optional Team Associated 24 Gram Steel Chassis Weight for the B6 and B6D buggies. Package also includes two mounting screws.  

Add to Cart

Team Associated B6 Steering Assembly — Team Associated

Team Associated B6 Steering Assembly

$13.30

Team Associated B6 Steering Assembly. This is the replacement steering assembly for the RC10 B6 and B6D buggies. Package includes right and left side steering bellcranks, steering rack and steering bellcrank brace.  

Add to Cart

Team Associated B6 Thumbscrews — Team Associated

Team Associated B6 Thumbscrews

$13.30

Team Associated B6 Thumbscrews. These are the replacement thumbscrews for the RC10 B6 and B6D buggies. Package includes two thumbscrews.   

Add to Cart

Team Associated B6 Titanium Front Axles — Team Associated

Team Associated B6 Titanium Front Axles

$57.90

Team Associated B6 Titanium Front Axles. These are the optional titanium front axles for the RC10 B6 and B6D buggies. Package includes two titanium front axles.  

Add to Cart

Team Associated B6 Top Shaft — Team Associated

Team Associated B6 Top Shaft

$26.50

Team Associated B6 Top Shaft. This is the replacement top shaft for the RC10 B6 and B6D buggies.

Add to Cart

Team Associated B6 Wing — Team Associated

Team Associated B6 Wing

$17.90

Team Associated B6 Wing. Package includes one clear, untrimmed wing that fits the RC10 buggies.  

Add to Cart

Team Associated B6 Wing/Body Mount — Team Associated

Team Associated B6 Wing/Body Mount

$13.90

Team Associated B6 Wing/Body Mount. This is the replacement wing mount for the RC10 B6 and B6D buggies. Package includes left and right wing braces, shim plate and wing mount buttons.

Add to Cart

Team Associated B6.1/B6.1D Aluminum "C" Mount (Blue) — Team Associated

Team Associated B6.1/B6.1D Aluminum "C" Mount (Blue)

$39.40

This is a replacement Team Associated Aluminum "C" Mount for use with the B6.1 and B6.1D. This aluminum mount is anodized blue color.   

Add to Cart

Team Associated B6.1/B6.1D Aluminum Differential Height Inserts — Team Associated

Team Associated B6.1/B6.1D Aluminum Differential Height Inserts

$48.00

These optional Team Associated B6.1 Aluminum Differential Height Inserts replace your standard diff height adjusters to provide long-lasting operation. Orientation numbers are etched onto the inserts, making them easy to read.   

Add to Cart

Team Associated B6.1/B6.1D Aluminum Gear Diff Cover — Team Associated

Team Associated B6.1/B6.1D Aluminum Gear Diff Cover

$17.90

Team Associated B6.1/B6.1D Aluminum Gear Diff Cover. This is the replacement gear diff cover. Package includes one diff cover plate.  

Sold Out

Team Associated B6.1/B6.1D Aluminum Laydown Motor Plate (Blue) — Team Associated

Team Associated B6.1/B6.1D Aluminum Laydown Motor Plate (Blue)

$29.80

This is a replacement Team Associated B6.1/B6.1D Aluminum Laydown Motor Plate in Blue anodize.   

Add to Cart

Team Associated B6.1/B6.1D Anti-Roll Bar Hardware — Team Associated

Team Associated B6.1/B6.1D Anti-Roll Bar Hardware

$32.90

Team Associated B6.1/B6.1D Anti-Roll Bar Hardware. This is the replacement hardware set for the B6.1 series roll bar. Package includes pivot balls, stop blocks and hardware. This hardware pack does not include ball cups, purchase them here TA10-91820

Add to Cart

Team Associated B6.1/B6.1D Ball Ends — Team Associated

Team Associated B6.1/B6.1D Ball Ends

$18.50

Team Associated B6.1/B6.1D Ball Ends. These are the replacement ball ends used on the B6.1 and B6.1D models.

Add to Cart

Team Associated B6.1/B6.1D Carbon Fiber Rear Shock Tower (Long) — Team Associated

Team Associated B6.1/B6.1D Carbon Fiber Rear Shock Tower (Long)

$36.40

Team Associated B6.1/B6.1D "Long" Carbon Fiber Rear Shock Tower. This is the long type tower. Package includes one "long" rear shock tower.  

Add to Cart

Team Associated B6.1/B6.1D Caster & Steering Block Set — Team Associated

Team Associated B6.1/B6.1D Caster & Steering Block Set

$32.90

This is a replacement Team Associated Caster and Steering Block Set for the B6.1 and B6.1D buggies.

Add to Cart

Team Associated B6.1/B6.1D Factory Team Aluminum Gear Diff Cross Pins — Team Associated

Team Associated B6.1/B6.1D Factory Team Aluminum Gear Diff Cross Pins

$13.30

Team Associated B6.1/B6.1D Factory Team Aluminum Gear Diff Cross Pins. These are the optional cross pins used in the B6.1 gear differential. Package includes two cross pins.  

Add to Cart

Team Associated B6.1/B6.1D Factory Team Direct Drive Slipper Eliminator Kit — Team Associated

Team Associated B6.1/B6.1D Factory Team Direct Drive Slipper Eliminator Kit

$56.40

This is an optional Team Associated B6.1/B6.1D Factory Team Direct Drive Kit. This kit eliminates the slipper and mounts the spur gear direct to the top shaft. This upgrade helps drop unnecessary rotational mass and weight. Features: Direct Drive top...

Add to Cart

Team Associated B6.1/B6.1D Factory Team Titanium Top Shaft Screw — Team Associated

Team Associated B6.1/B6.1D Factory Team Titanium Top Shaft Screw

$32.90

This is an optional Team Associated B6.1/B6.1D Factory Team Titanium Top Shaft Screw.  This new top shaft screw replaces the stock steel version found in the B6.1, B6.1D, T6.1, and SC6.1 Team Kits. It reduces the rotating weight and comes with...

Add to Cart

Team Associated B6.1/B6.1D Front Shock Tower Cover (2) — Team Associated

Team Associated B6.1/B6.1D Front Shock Tower Cover (2)

$10.00

This is a pack of two replacement Team Associated B6.1/B6.1D Front Shock Tower Covers, including one flat arm style cover and one gull wing style cover.   This part fits the following vehicles: RC10B6.1 RC10B6.1D RC10B6.1DL RC10B6...

Add to Cart

Team Associated B6.1/B6.1D FT Front Anti-roll Bar Set — Team Associated

Team Associated B6.1/B6.1D FT Front Anti-roll Bar Set

$26.50

This is a replacement Team Associated B6.1/B6.1D FT Front Anti-roll Bar Set, including three bars. Effects of Front Roll Bar Adjustment Stiffness Characteristic Softer Increased Front Chassis Roll Increased Front Traction Decreased Rear...

Add to Cart

Team Associated B6.1/B6.1D FT Rear Anti-roll Bar Set — Team Associated

Team Associated B6.1/B6.1D FT Rear Anti-roll Bar Set

$27.50

This is an optional Team Associated B6.1/B6.1D FT Rear Anti-roll Bar Set. This set includes three bars. Effects of Rear Roll Bar Adjustment Stiffness Characteristic Softer Increased Rear Chassis Roll Increased Rear Traction Decreased Front...

Add to Cart

Team Associated B6.1/B6.1D Gear Diff Rebuild Kit — Team Associated

Team Associated B6.1/B6.1D Gear Diff Rebuild Kit

$29.80

Team Associated B6.1/B6.1D Gear Diff Rebuild Kit. Package includes the gears, shims and hardware needed to rebuild one differential.  

Add to Cart

Team Associated B6.1/B6.1D Gear Differential Case — Team Associated

Team Associated B6.1/B6.1D Gear Differential Case

$16.60

Team Associated B6.1/B6.1D Gear Differential Case. Package includes diff case, cover and cross pins.  

Add to Cart

Team Associated B6.1/B6.1D Gear Differential Kit — Team Associated

Team Associated B6.1/B6.1D Gear Differential Kit

$82.50

Team Associated B6.1/B6.1D Gear Differential Kit. Package includes all the parts needed to build one gear diff.

Add to Cart

Team Associated B6.1/B6.1D Gear Differential Outdrives — Team Associated

Team Associated B6.1/B6.1D Gear Differential Outdrives

$28.20

Team Associated B6.1/B6.1D Gear Differential Outdrives. These are the replacement gear diff outdrives. Package includes two outdrives and two pins.  

Add to Cart

Team Associated B6.1/B6.1D Gear Differential Seals — Team Associated

Team Associated B6.1/B6.1D Gear Differential Seals

$8.90

Team Associated B6.1/B6.1D Gear Differential Seals. Package includes the gasket and o-rings needed to rebuild one differential.  

Add to Cart

Team Associated B6.1/B6.1D HTC Vented Slipper Hub (Outer) — Team Associated

Team Associated B6.1/B6.1D HTC Vented Slipper Hub (Outer)

$38.10

This is a replacement Team Associated "Outer" B6.1/B6.1D HTC Vented Slipper Hub.   

Add to Cart

Team Associated B6.1/B6.1D Layback Gearbox — Team Associated

Team Associated B6.1/B6.1D Layback Gearbox

$26.50

Team Associated B6.1/B6.1D Layback Gearbox. This is the replacement layback type gearbox.  

Add to Cart

Questions & Phone Orders

3/103 Cryers Road
(Best Entrance from Transport Place)
East Tamaki, 2013, Auckland
Call us: 09-265-1041

Safe Payment Options

Read our Recent Posts

The Basic Skills For Nitro RC Car

Top